A pointwise equilibrating polynomial (PEP) element is proposed for nonlinear analysis of frames in which each member can be modeled by one element in most cases. The formulation of the element is based on the imposition of compatibility conditions at end nodes as well as the satisfaction of equilibrium at midspan. The resulting expression for this new element is accurate in describing the force‐versus‐displacement relations at the element level, is simple, and it does not lead to a significant numerical truncating error in the computer analysis. Its implementation in a nonlinear analysis program is straightforward. The accuracy of the analysis results by the element was found to be considerably higher than its cubic counterpart in a number of well‐known examples. The limitation or inconvenience of the method of stability function such as the separation of the solution for tensile, compressive, and zero load cases is eliminated.
In practical stability design and analysis of steel members and structures, one must allow for member imperfection. Various national design codes impose different values of initial imperfection for member-strength determination, such as 0.001 of the member length in the 1986 Load and Resistance Factor Design Specification for Structural Steel Buildings . This paper presents a new method of including the effects of initial imperfection in the element stiffness without needing to adopt a curved-element formulation, which is deficient for members under high axial load, or to divide a member into two or more straight elements in order to simulate member imperfection. A very considerable savings and convenience in data-manipulation effort and computer time can be achieved when using the proposed element.