Compact air - air heat exchanger (CAAHX) is a key component of the airborne environmental control system (ECS) for commercial airliners. In order to predict the performance of the ECS during the flight conditions, a computational model to descript the performance of CAAHX is needed. This study presents a common heat transfer model for engineering applications based on the η-NTU relationship and the structural parameters of CAAHX. Based on experiments, the common heat transfer models of two CAAHXs are established. Two kinds of values of the CAAHX's outlet temperature which calculated by the heat transfer model and measured in the test are used to verify the accuracy of the models. Results show that the proposed model can get the CAAHXs’ characteristics in full working conditions by using only a small amount of experimental data, which can greatly improve the efficiency of the system design and optimization. The model can also provide a theoretical guidance in the related research fields
Drafting formations have been long recognized as highly effective for reducing drag and enhancing athletic performance, particularly in race walking events. The precise spacing and positioning of the race walkers are critical to optimizing the effectiveness of drafting. In this study, drag reduction in 15 drafting formations is investigated using wind tunnel experiments and CFD numerical simulations. The results show excellent consistency in drag reduction rate between the two methods, with differences being within 10%. This can be attributed to spacing replacing body shape differences as the primary factor influencing drag reduction. Optimal double, triple, and quadruple drafting formations produce the same results in both the wind tunnel experiments and CFD simulation, resulting in drag reductions of 67%, 66%, and 81% (wind tunnel) and 65%, 72%, and 85% (CFD). The sources of drag differences in the two methods are discussed from various aspects. The flow field obtained through CFD analysis is used to examine the mechanism of drag reduction, revealing that drafting formations have a significant shielding effect on incoming air, which reduces the number and speed of airflow impacting the core race walker. This shielding effect is identified as the primary cause of drag reduction. Using an empirical model for mechanical power output, optimal double, triple, and quadruple drafting formations enhance sports economy (4.4–5.7%), speed (3.61–4.67%), and performance (173.8–223.3 s) compared to race walking alone. The findings can serve as a reference for race walkers’ positioning strategies and provide insights for considering drafting formations in various running events.
Aircraft ice accretion due to Super-cooled Large Droplets (SLD) has been widely concerned since the Roselawn accident, and the airworthiness authority has issued a new notice of proposed rulemaking aiming to the icing condition of SLD. To extend the current water droplet impingement computation code to cover the range of SLD, some typical SLD splashing models was introduced first, and the methods to integrate an empirical SLD model into current impingement code was discussed, although the code has been validated partially in both 2D and 3D conditions for the normal icing envelope defined in CCAR 25 APPENDIX C. Through the comparison of impingement results with the SLD experiment and LEWICE, it could be found that the empirical SLD model can deal with SLD impingement but still need many improvements.
1 May 2022 in International Journal of Electrical Power & Energy Systems
Accurate collection and analysis of ground reaction force (GRF) data are crucial for optimizing the technical movements of speed skaters; however, it has been a challenge for the limitations of experimental equipment and application scenarios. Therefore, we proposed a novel approach for estimating GRF based on kinematics obtained from markerless video tracking systems and achieved low errors compared with the experimental data. Our method allows for further biomechanical analysis, including muscle force and power, during speed skating competitions.