Richard Wascher

Mr. Richard Wascher

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2020 in Composites Part A: Applied Science and Manufacturing
Verified
Journal Article
Open access
RWRichard Wascher
Richard Wascher
FBFlorian Bittner
Florian Bittner
GAGeorg Avramidis
Georg Avramidis
MBMartin Bellmann
Martin Bellmann
HEHans-Josef Endres
Hans-Josef Endres
WVWolfgang Viöl
Wolfgang Viöl

18 October 2021 in Forests
Verified
Journal Article
Open access
PDF file
RWRichard Wascher
Richard Wascher
GAGeorg Avramidis
Georg Avramidis
WVWolfgang Viöl
Wolfgang Viöl
In this study, the dimensional stability and mechanical properties of plywood made from untreated and plasma-pretreated beech veneers were compared. The wood veneers used (native and thermally modified) were impregnated with melamine resin in a simple dipping process prior to plywood production. The duration of the impregnation process was adjusted to give the same melamine resin loading for the different veneer types, with the plasma-pretreated veneers requiring only a fraction of the impregnation time compared with non-plasma-pretreated veneers. With comparable melamine loading, testing of the mechanical properties of the plywood for the different specimen collectives showed significant differences in some cases with respect to compressive strength, bending strength and tensile strength (with the associated moduli of elasticity). For example, it was shown that plywood made from plasma-pretreated native beech veneers shows an increase in bending strength of about 8%, and from plasma-pretreated and thermally modified beech veneers, there is an increase of about 10% compared to the reference.

20 August 2025 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
RWRichard Wascher
Richard Wascher
HFHelena Fink
Helena Fink
GAGeorg Avramidis
Georg Avramidis
WVWolfgang Viöl
Wolfgang Viöl

26 November 2024 in Journal of Materials Science: Materials in Engineering
Verified
Journal Article
Open access
PDF file
GDGüneş Akın Doğan
Güneş Akın Doğan
RWRichard Wascher
Richard Wascher
GAGeorg Avramidis
Georg Avramidis
WVWolfgang Viöl
Wolfgang Viöl
CGChristoph Gerhard
Christoph Gerhard
In this study, the possible influences of thermal modification of wood on the quality of laser texturing of beech veneers are investigated by comparing native and thermally modified samples. By varying the process parameters of a CO2 laser, the surfaces of both types of veneer were textured and the resulting surface roughness and aspect ratios were analyzed in order to evaluate the efficiency of the laser texturing and the quality of the textures produced. The main results show that the thermal modification of the wood influences the cutting widths, the removal depths, and the surface roughness, with thermally modified veneers generally having larger cutting widths and different removal depths compared to native veneers, indicating the influence of the wood modifications on the material physical and chemical properties and their interaction with the laser processing. Furthermore, the study shows how the laser processing parameters—feed rate and laser power—influence the surface quality and structural dimensions of the engraved lines, and establishes that the moisture content of the wood has a significant influence on its thermal conductivity and thus on the laser cutting process. The research work highlights the complexity of laser texturing of wood and emphasizes the need to take into account the change in the intrinsic properties of the material as a result of thermal modification.

15 September 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RWRichard Wascher
Richard Wascher
HFHelena Fink
Helena Fink
GAGeorg Avramidis
Georg Avramidis
The composite ”NETWOOD” consists of thermally-modified beech veneer layers reinforced with flax fiber and bonded with melamine resin. The purpose of this study is to evaluate the effects of flax fiber integration and plasma pretreatment of the veneers and fiber fabric on water absorption and the resulting dimensional stability. The samples were produced in six variants, involving different combinations of plasma pretreatment (treated/untreated) and flax fiber incorporation (with/without). Dimensional stability was measured by subjecting the samples to several wet-dry cycles (1–5), during which changes in thickness, weight, and density were analyzed. The results show that the samples containing flax fiber exhibit significantly lower water absorption than the control samples without fiber. The samples without fiber exhibit a water absorption rate of 80–90%, whereas the samples with fiber reach only 35–45%. Samples consisting of plasma-pretreated veneers and fibre materials (VPFP) exhibit the lowest water absorption. Furthermore, the present empirical studies show that the samples reinforced with flax fiber exhibit a significantly lower wet-to-dry ratio in terms of changes in thickness and weight than the samples that did not contain flax fiber.

2 July 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RWRichard Wascher
Richard Wascher
HFHelena Fink
Helena Fink
GAGeorg Avramidis
Georg Avramidis
The composite ”NETWOOD” consists of thermally-modified beech veneer layers reinforced with flax fiber and bonded with melamine resin. The purpose of this study is to evaluate the effects of flax fiber integration and plasma pretreatment of the veneers and fiber fabric on water absorption and the resulting dimensional stability. The samples were produced in six variants, involving different combinations of plasma pretreatment (treated/untreated) and flax fiber incorporation (with/without). Dimensional stability was measured by subjecting the samples to several wet-dry cycles (1–5), during which changes in thickness, weight, and density were analyzed. The results show that the samples containing flax fiber exhibit significantly lower water absorption than the control samples without fiber. The samples without fiber exhibit a water absorption rate of 80–90%, whereas the samples with fiber reach only 35–45%. Samples consisting of plasma-pretreated veneers and fibre materials (VPFP) exhibit the lowest water absorption. Furthermore, the present empirical studies show that the samples reinforced with flax fiber exhibit a significantly lower wet-to-dry ratio in terms of changes in thickness and weight than the samples that did not contain flax fiber.