Nature’s design of functional materials relies on smart combinations of simple components to achieve desired properties. Silk and cellulose are two clever examples from nature–spider silk being tough due to high extensibility, whereas cellulose possesses unparalleled strength and stiffness among natural materials. Unfortunately, silk proteins cannot be obtained in large quantities from spiders, and recombinant production processes are so far rather expensive. We have therefore combined small amounts of functionalized recombinant spider silk proteins with the most abundant structural component on Earth (cellulose nanofibrils (CNFs)) to fabricate isotropic as well as anisotropic hierarchical structures. Our approach for the fabrication of bio-based anisotropic fibers results in previously unreached but highly desirable mechanical performance with a stiffness of ∼55 GPa, strength at break of ∼1015 MPa, and toughness of ∼55 MJ m–3. We also show that addition of small amounts of silk fusion proteins to CNF results in materials with advanced biofunctionalities, which cannot be anticipated for the wood-based CNF alone. These findings suggest that bio-based materials provide abundant opportunities to design composites with high strength and functionalities and bring down our dependence on fossil-based resources.
Nanocelluloses are anisotropic nanoparticles of semicrystalline assemblies of glucan polymers. They have great potential as renewable building blocks in the materials platform of a more sustainable society. As a result, the research on nanocellulose has grown exponentially over the last decades. To fully utilize the properties of nanocelluloses, a fundamental understanding of their colloidal behavior is necessary. As elongated particles with dimensions in a critical nanosize range, their colloidal properties are complex, with several behaviors not covered by classical theories. In this comprehensive Review, we describe the most prominent colloidal behaviors of nanocellulose by combining experimental data and theoretical descriptions. We discuss the preparation and characterization of nanocellulose dispersions, how they form networks at low concentrations, how classical theories cannot describe their behavior, and how they interact with other colloids. We then show examples of how scientists can use this fundamental knowledge to control the assembly of nanocellulose into new materials with exceptional properties. We hope aspiring and established researchers will use this Review as a guide.
Wood, with its constituent building block cellulose, is by far the most common biomaterial on the planet and has been the most important material used by humans to establish civilization. If there is one single biomaterial that should be studied and used by materials scientists across disciplines to achieve a sustainable future, it is cellulose. This perspective provides insights for the general materials science community about the unique properties of wood and cellulose and how they may be used in advanced sustainable materials to make a substantial societal impact. The focus is on sawn wood or cellulose fibers produced at scale by industry and the more recent cellulosic nanomaterials, highlighting the areas where these cellulose‐based materials can be valorized into higher‐order functions. Numerous articles have comprehensively reviewed different areas where cellulose is currently used in advanced materials science. The objective here is to provide general insight for all material scientists and to provide the opinions about the areas in which cellulose and wood have the largest potential to make a significant societal impact, especially to realize next‐generation sustainable materials for construction, food, water, energy, and information. Discussing key areas where future research is needed to open avenues toward a more sustainable future is ended.
Metal–organic frameworks (MOFs) are hybrid porous crystalline networks with tunable chemical and structural properties. However, their excellent potential is limited in practical applications by their hard‐to‐shape powder form, making it challenging to assemble MOFs into macroscopic composites with mechanical integrity. While a binder matrix enables hybrid materials, such materials have a limited MOF content and thus limited functionality. To overcome this challenge, nanoMOFs are combined with tailored same‐charge high‐aspect‐ratio cellulose nanofibrils (CNFs) to manufacture robust, wet‐stable, and multifunctional MOF‐based aerogels with 90 wt% nanoMOF loading. The porous aerogel architectures show excellent potential for practical applications such as efficient water purification, CO2 and CH4 gas adsorption and separation, and fire‐safe insulation. Moreover, a one‐step carbonization process enables these aerogels as effective structural energy‐storage electrodes. This work exhibits the unique ability of high‐aspect‐ratio CNFs to bind large amounts of nanoMOFs in structured materials with outstanding mechanical integrity—a quality that is preserved even after carbonization. The demonstrated process is simple and fully discloses the intrinsic potential of the nanoMOFs, resulting in synergetic properties not found in the components alone, thus paving the way for MOFs in macroscopic multifunctional composites.
Supramolecular double network films, consisting of cellulose nanofibrils (CNF) entangled with the algal polysaccharides alginate or carrageenan, were prepared to achieve water-resistant CNF nanopapers with excellent mechanical properties in both the wet and dry states following the locking of the structures using Ca2+.