Lee SY, et al. J Korean Med Sci. 2015 Apr;30(4):489-494. https://doi.org/10.3346/jkms.2015.30.4.489

Acetabular labral tears cause of pain in patients with symptomatic hip dysplasia. To date, no structured grading system has been developed to evaluate labral tears in these patients. The present study describes a new system of grading labral tears in patients with acetabular dysplasia. The data of 66 patients who underwent hip arthroscopy for symptomatic hip dysplasia from March 2014 to February 2018 were reviewed. Labral tears were classified into four groups, based on the occurrence of chondrolabral junction (CLJ) disruption, capsulolabral recess (CLR) disruption, and labral displacement. Labral tears without instability were classified as grade 1 or 2. Partial delamination or blistering of the labrum with minimal fraying at the CLJ was classified as grade 1, whereas labral tears with CLJ disruption were classified as grade 2. Unstable labral tears with CLR disruption followed by CLJ disruption, but without labral displacement, were classified as grade 3, whereas unstable labral tears with CLR and CLJ disruption, but with labral displacement, were classified as grade 4. The radiological and clinical characteristics of patients in each grade were determined including by simple radiographs and MRI/MR arthrography, as were concomitant findings, including rupture of the ligamentum teres, articular cartilage damage, and presence of a paralabral cyst. The surgical options selected for each grade and clinical outcomes, including modified Harris hip scores (mHHS) and Western Ontario and McMaster Universities Osteoarthritis index (WOMAC) scores, were evaluated. Spearman’s correlation analyses were performed to assess whether labral tear grade correlated with baseline characteristics, the incidence of concomitant injuries, and the severity of osteoarthritis (OA). The Wilcoxon test for paired data was performed to compare treatment results with pain scores. The study cohort included six men and 53 women of mean ± SD age 39.9 ± 13.0 years (range, 15–66 years). Of the 66 hips, seven (10.6%), 10 (15.2%), 30 (45.5%), and 19 (28.8%) were classified as grades 1–4, respectively. Symptom duration (P = 0.017), preoperative Tönnis OA grade (P < 0.001), cartilage damage (P < 0.001), and the presence of a paralabral cyst (P = 0.001) correlated significantly with baseline tear grade. In all groups, mHHS and WOMAC scores improved after surgical treatment. Arthroscopic findings of labral tears in patients with hip dysplasia differed from the conventional classification. The classification system proposed in this study will likely be useful for determining the degree of labral tear in patients with hip dysplasia and for predicting treatment outcomes.

Quadratus lumborum block (QLB) has been shown to be effective for pain relief after hip surgery. This study evaluated the efficacy of ultrasound-guided anterior QLB in pain control after total replacement hip arthroplasty (TRHA). A total of 115 patients receiving anterior QLB were propensity score-matched with 115 patients who did not receive the block. The primary outcome was opioid consumption at 24, 24–48, and 48 postoperative hours. Secondary outcomes included pain scores at the post-anesthesia care unit (PACU), 8, 16, 24, 32, 40, and 48 h length of hospital stay, time to first ambulation, and the incidence of opioid-related side effects. Postoperative opioid consumption 48 h after surgery was significantly lower in the QLB group. Resting, mean, worst, and the difference of resting pain scores compared with preoperative values were significantly lower in the QLB group during the 48 postoperative hours. The length of hospital stay was shorter in the QLB group. The incidence of postoperative nausea and vomiting was significantly lower in the QLB group during the 48 postoperative hours, except at the PACU. This study suggests that anterior QLB provides effective postoperative analgesia for patients undergoing THRA performed using the posterolateral approach.

Background: It is assumed that impingement between the ceramic liner and the stem increases the possibility of a liner fracture in total hip arthroplasty with a ceramic-on-ceramic bearing. The purpose of this study was to analyze the pattern of the impingement by evaluating the notches (U-shaped indented wear scars engraved on the stem) on radiographs to determine when and where impingement develops and to analyze the factors affecting its occurrence. Methods: Among the primary total hip arthroplasty cases using a ceramic-on-ceramic bearing performed from November 1997 to December 2003, 244 cases of 197 patients (123 male patients and 74 female patients) that had follow-up of ≥15 years were included. All of the radiographs were examined with special regard to the notches and the cup positions. Results: Notches were detected at 77 sites of 57 cases (23.4%) for the first time between 8 months and 14.8 years after the surgical procedure. They were located on the neck or the shoulder of the stem. Shoulder notches were detected only in the cases with a short-neck head. Shoulder notches were found in 29 cases (20.0% of short-neck cases). Cup inclination was lower (p = 0.01) and anteversion was higher (p = 0.01) in the group with notches than the group without notches. There were 5 cases of ceramic head fracture. One of them experienced another ceramic liner fracture, assumed to be caused by prosthetic shoulder impingement, after the revision surgical procedure. Conclusions: The results of this study suggest that impingement between the stem and the ceramic liner occurs in a considerable proportion of patients who underwent total hip arthroplasty not only on the neck but also on the shoulder of the stem. Forceful and abrupt impingement on the stem shoulder can cause ceramic liner fracture. Impingement between the stem shoulder and the ceramic liner should be considered in designing a stem. It seems to be prudent to recommend that patients avoid squatting or sitting cross-legged on the floor as much as possible. Level of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Oxidised regenerative cellulose (ORC) is an absorbable haemostatic agent that acts independently on the blood coagulation mechanisms. Although ORC products have been used as adjuncts in various surgical procedures, their haemostatic effect, particularly the powder type (Surgicel®-P), during primary total hip arthroplasty (THA) remains uncertain. This study aimed to evaluate the effectiveness and safety of ORC powder in patients undergoing primary THA. This study included 279 patients who underwent primary THA between January 2022 and July 2024, and they were divided into two groups based on the use of ORC powder: the control (n = 138) and SC (SurgiCel group, n = 141) groups. Data on perioperative outcomes, including operative time, total blood loss (TBL), intraoperative blood loss (IBL), hidden blood loss (HBL), haemoglobin (Hb) drops, and complication rates over 3 months, were collected and compared between the two groups. The mean IBL was significantly lower in the SC group (197.1 mL) than in the control group (243.5 mL) (P < 0.001). The total operative time (P = 0.465), procedure time (P = 0.117), TBL (P = 0.167), and HBL (P = 0.771) showed no significant differences. The mean postoperative Hb drop was significantly different between the control and SC groups (1.5 vs. 1.0 g/dL, P < 0.001). Similarly, the mean postoperative day 1 Hb drop was significantly lower in the SC group than in the control group (1.7 vs. 2.0 g/dL, P = 0.013). Complication rates showed no significant differences during the 3-month postoperative follow-up. ORC powder significantly reduced IBL and postoperative Hb drops without any comparable complications in patients undergoing primary THA. These findings suggest that ORC powder is a safe and effective haemostatic agent during primary THA procedures, which may be a valuable adjuvant for reducing blood loss and potential to reduce blood transfusion requirements.

This study aimed to analyze the epidemiologic characteristics of patients who underwent hip arthroplasty using the Korean nationwide database and investigate the recent trends in implant fixation methods and bearing surface selection. We aimed to compare clinical characteristics and differences with the results from the registry of other western countries. We analyzed the data collected by the Health Insurance Review and Assessment Service database of Korea from 2007 to 2011 and the Main Surgery Statistical Yearbook from 2014 to 2018, published by the National Health Insurance Service. The number and rate of patients who underwent hip joint arthroplasty per 10,000 persons have been steadily increasing since 2007. There was a big difference in mean age and preoperative diagnosis of patients between the bipolar hemiarthroplasty and total hip arthroplasty groups. Most patients underwent surgery using a cementless biological fixation method, and the cemented fixation method was selectively used for a small portion of old aged osteoporotic patients. In relation to the use of bearing surfaces, the registry data showed that ceramic-ceramic bearings were used at an overwhelmingly high rate (81%) in Korea compared to other countries. The reason was attributable to various factors, such as patient’s age or economic status, differences in the health insurance system between countries, and recently reported complications, such as ceramic fracture or noise.