Carmine P Polito

Prof. Carmine P Polito

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2008 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
CPCarmine P Polito
Carmine P Polito
RGRussell A. Green
Russell A. Green
JLJongwon Lee
Jongwon Lee
This paper discusses the applicability of two simple models for predicting pore water pressure generation in nonplastic silty soil during cyclic loading. The first model was developed by Seed et al. in the 1970s and relates the pore pressure generated to the cycle ratio, which is the ratio of the number of applied cycles of loading to the number of cycles required to cause liquefaction. The second model is the Green-Mitchell-Polito model proposed by Green et al. in 2000, which relates pore pressure generation to the energy dissipated within the soil. Based upon the results of approximately 150 cyclic triaxial tests, the writers show that both models are applicable to silty soils. A nonlinear mixed effects model was used for regression analyses to develop correlations for the necessary calibration parameters. The results show that the trends in both α and pseudoenergy capacity calibration parameters for the Seed et al. and Green et al. pore pressure generation models, respectively, differ significantly for...

1 March 2020 in Canadian Geotechnical Journal
Verified
Journal Article
Closed access
CPCarmine P Polito
Carmine P Polito
ESErin L.D. Sibley
Erin L.D. Sibley
The threshold fines content of a sand with nonplastic fines represents the silt content where the soil transitions from being a sand matrix, with silt particles entirely contained in the voids between the sands, to being a silt matrix that contains isolated sand grains. A laboratory testing program was performed on a series of mixtures of sand and silt, with silt contents ranging from 0% to 45%, to determine if the friction angle, cyclic resistance, and normalized dissipated energy per unit volume required to initiate liquefaction changed based upon the silt content of the soil relative to the threshold fines content. These data were evaluated with respect to whether the silt content of the specimens was below the lower-bound threshold fines content or above the upper-bound threshold fines content. It was determined that soils above the upper-bound threshold fines content had lower friction angles, lower cyclic resistances, and required less normalized dissipated energy per unit volume to initiate liquefaction than soils below the lower-bound threshold fines content. It was also shown that under the larger strains experienced during monotonic testing, the friction angle did not reach a constant value until it was well above the upper-bound limiting silt content.

7 September 2018 in Geotechnical Testing Journal
Verified
Journal Article
Closed access
CPCarmine P Polito
Carmine P Polito
HMHenry H. M. Moldenhauer
Henry H. M. Moldenhauer
The pore pressures generated in soils subjected to cyclic loadings have been shown to be proportional to the energy dissipated in the soil during that loading. Both stress-controlled and strain-controlled cyclic triaxial tests can be used to develop parameters for energy-based pore pressure models; however, the patterns of their energy dissipation into the soil are quite different. In this study, the two patterns of energy-dissipation associated with stress-controlled and strain-controlled cyclic triaxial tests were developed and then confirmed using sixteen stress-controlled and sixteen strain-controlled cyclic triaxial tests. Additionally, it was shown that the patterns of pore-pressure generation for the two tests, which differ greatly when evaluated relative to the cycles of loading, were very similar when evaluated in terms of their energy dissipation.

8 October 2023 in Geotechnics
Verified
Journal Article
Open access
PDF file
CPCarmine P Polito
Carmine P Polito
One common method of estimating emax and emin for mixtures of sand and silt requires that the values of several empirical constants be determined. These empirical constants are the filling coefficients, a, and embedment coefficients, b, which can be determined either via lab testing or correlations. The study reported here developed simple correlations for estimating the filling and embedment coefficients using readily obtained laboratory data. These models were found to be excellent in producing filling and embedment coefficients that accurately predicted values of the index void ratios for sand and silt mixtures, with most R2 values being 0.94 or greater.

29 February 2024 in Geotechnics
Verified
Journal Article
Open access
PDF file
CPCarmine P Polito
Carmine P Polito
JMJames R Martin
James R Martin
The factors that influence dissipated energy and pore pressure generation patterns with respect to the cycle ratio and dissipated energy ratio were analyzed using the results of cyclic triaxial and cyclic direct simple shear tests. These analyses revealed several interesting differences in pore pressure generation patterns when related to cycle ratio than to dissipated energy ratio. Soils with different pore pressure generation patterns when plotted against the cycle ratio were found to have nearly identical pore pressure generation patterns when plotted against the dissipated energy ratio. The differences exist as the result of the fundamental differences between cycle ratio and dissipated energy ratio. The fundamental difference is that pore pressure generation is directly linked to the process of energy dissipation; it is not inherently linked to cycles of loading. Therefore, to achieve an understanding of the pore pressure response of a soil that is independent of the specifics of the applied loading, one needs to evaluate it in terms of energy dissipation, not in terms of cycles of loading, especially irregular loadings.

9 October 2024 in Geotechnics
Verified
Journal Article
Open access
PDF file
CPCarmine P Polito
Carmine P Polito
ZZZhuoyue Zhang
Zhuoyue Zhang
HMHenry H. M. Moldenhauer
Henry H. M. Moldenhauer
The amount of energy dissipated in the soil during cyclic loading controls the amount of pore pressure generated under that loading. Because of this, the normalized dissipated energy per unit volume is the basis for both pore pressure generation models and energy-based liquefaction analyses. The pattern of energy dissipation in the soil in load-controlled cyclic triaxial and load-controlled cyclic direct simple shear tests and displacement-controlled cyclic triaxial and displacement-controlled cyclic direct simple shear tests is quite different. As a result, the pattern of pore pressure generation associated with load-controlled tests is markedly different from that in displacement-controlled tests. Pore pressure generation patterns for each of the four test types were proposed based upon the manner in which the load was applied during the test and the soil’s response to that loading. The results of four tests, two load controlled and two displacement controlled, were then used to verify these patterns. Pore pressure generation rates in load-controlled and displacement-controlled tests are different when plotted against their cycle ratios. Conversely, the tests produce nearly identical patterns when plotted against energy dissipation ratio. This occurs because of the relationship between energy dissipation ratio and pore pressure generation is independent of the loading pattern.