In this work, a design optimization study was conducted to improve the performance of a membraneless microfluidic fuel cell with a double-bridge cross-section of the flow channel. Governing equations including Navier–Stokes, mass-transport, and Butler–Volmer equations were solved numerically to analyze the electrochemical phenomena and evaluate the performance of the fuel cells. Optimization was performed to maximize the peak power density using a genetic algorithm combined with a surrogate model constructed by radial basis neural network. Two sub-channel widths of the flow channel were selected as design variables for the optimization. As a result, a large increase in the inner channel width and a small decrease in the outer channel width effectively increased the peak power density of the MMFC. The optimal design increased the peak power density by 57.6% compared to the reference design.
A double-bridge shape is proposed as a novel flow channel cross-sectional shape of a membraneless microfluidic fuel cell, and its electrochemical performance was analyzed with a numerical model. A membraneless microfluidic fuel cell (MMFC) is a micro/nano-scale fuel cell with better economic and commercial viability with the elimination of the polymer electrolyte membrane. The numerical model involves the Navier–Stokes, Butler–Volmer, and mass transport equations. The results from the numerical model were validated with the experimental results for a single-bridge channel. The proposed MMFC with double-bridge flow channel shape performed better in comparison to the single-bridge channel shape. A parametric study for the double-bridge channel was performed using three sub-channel widths with the fixed total channel width and the bridge height. The performance of the MMFC varied most significantly with the variation in the width of the inner channel among the sub-channel widths, and the power density increased with this channel width because of the reduced width of the mixing layer in the inner channel. The bridge height significantly affected the performance, and at a bridge height at 90% of the channel height, a higher peak power density of 171%was achieved compared to the reference channel.