Mechanical twins are common microstructures in deformed calcite. Calcite twins have been used for a long time as indicators of stress/strain orientations and magnitudes. Developments during the last decade point toward significant improvements of existing techniques as well as new applications of calcite twin analysis in tectonic studies. This review summarises the recent progress in the understanding of twin formation, including nucleation and growth of twins, and discusses the concept of CRSS and its dependence on several factors such as strain, temperature and grain size. Classical and recent calcite twin measurement techniques are also presented and their pros and cons are discussed. The newly proposed inversion techniques allowing for the use of calcite twins as indicators of orientations and/or magnitudes of stress and strain are summarized. Benefits for tectonic studies are illustrated through the presentation of several applications, from the scale of the individual tectonic structure to the continental scale. The classical use of calcite twin morphology (e.g., thickness) as a straightforward geothermometer is critically discussed in the light of recent observations that thick twins do not always reflect deformation temperature above 170–200 °C. This review also presents how the age of twinning events in natural rocks can be constrained while individual twins cannot be dated yet. Finally, the review addresses the recent technical and conceptual progress in calcite twinning paleopiezometry, together with the promising combination of this paleopiezometer with mechanical analysis of fractures or stylolite roughness.

E-twinning is a common plastic deformation mechanism in calcite deformed at low temperature. Strain rate, temperature and confining pressure have negligible effects on twinning activation which is mainly dependent on differential stress. The critical resolved shear stress (CRSS) required for twinning activation is dependent on grain size and strain hardening. This CRSS value may obey the Hall–Petch relation, but due to sparse experimental data its actual evolution with grain size and strain still remains a matter of debate. In order to provide additional constraints on twinning activation and development, new mechanical tests were carried out at room temperature on unconfined single crystals of calcite, with different sizes and crystallographic orientations. Uniaxial deformation was performed at a controlled displacement rate, while the sample surface was monitored using optical microscopy and a high-resolution CCD (charge-coupled device) camera. The retrieved macroscopic stress–strain behavior of the crystals was correlated with the surface observations of the deformation process. Results show (1) the onset of crystal plasticity with the activation of the first isolated mechanical twins during the strain hardening stage, and (2) the densification and thickening of twin lamellae during the steady-state flow stress stage. Such thickening of twin lamellae at room temperature emphasizes that calcite twin morphology is not controlled solely by temperature. The different values for the CRSS obtained for the activation of isolated twins and for the onset of twin densification and thickening raises questions regarding the appropriate value to be considered when using calcite twin data for stress inversion purposes.

Calcite twinning is a dominant deformation mechanism at low temperatures. It is often used to reconstruct paleostresses: orientations of the principal stress axes, stress ratios and differential stress. Despite numerous studies, on single crystals and aggregates, questions remain about the initiation and evolution of the twinning. In particular, the existence of a critical value for the activation of twin planes is debated. In this study, Carrara marble samples were uniaxially deformed at low temperature. The experiments were monitored in situ in an SEM (Scanning Electron Microscope) and a deformation analysis was performed at regular intervals using image correlation. Image correlation analysis shows the link between the overconcentration of strains and the appearance of the first twinned planes. This is followed by a densification and a gradual thickening of the twin lamellae. Fracturing only appears in a third stage as a precursor to the collapse of the sample. The inversion, using the CSIT-2 technique, showed that the twinned planes are globally related to the applied macroscopic stress. The inversion allows one to retrieve the macroscopic stress tensor. Schmid factors were extracted from this analysis and correlated to the loading curves. For crystals of about 200 µm diameter, the threshold value is in between 6.75 and 8.25 MPa.

E-twinning is a common plastic deformation mechanism in calcite deformed at low temperature. Strain rate, temperature and confining pressure have negligible effects on twinning activation that is mainly dependent on differential stress. The critical resolved shear stress (CRSS) required for twinning activation is dependent on grain size and strain hardening. This CRSS value may obey the Hall-Petch relation, but due to sparse experimental data its actual evolution with grain size and strain still remains a matter of debate. In order to provide additional constraints on twinning activation and development, new mechanical tests were carried out at room temperature on unconfined single crystals of calcite, with different sizes and crystallographic orientations. Uniaxial deformation was performed at controlled displacement rate, meanwhile the sample surface was monitored using optical microscopy and high resolution CCD camera. The retrieved macroscopic stress-strain behavior of the crystals was correlated with the surface observations of the deformation process. Results show (1) the onset of crystal plasticity with the activation of the first isolated mechanical twins during the strain hardening stage, and (2) the densification and thickening of twin lamellae during the steady state flow stress stage. Such thickening of twin lamellae at room temperature emphasizes that calcite twin morphology is not only controlled by temperature. The different values for the CRSS obtained for the activation of isolated twins and for the onset of twin densification and thickening questions the appropriate value to be considered when using calcite twin data for stress inversion purposes.

La compréhension et la simulation des mécanismes de déformation dans la croûte supérieure sont des enjeux scientifiques et techniques importants. La calcite étant un minéral commun de la croûte supérieure se déformant essentiellement par maclage sous 200 °C, c'est pour cette raison que l'on s'intéresse plus particulièrement au maclage de la calcite dans le cadre de cette thèse. L'utilisation du maclage de la calcite n'en est pas à son coup d'essai et de nombreuses méthodes d'inversions existent que ce soit pour remonter aux tenseurs des contraintes comme aux tenseurs des déformations. Cette thèse propose une nouvelle méthode d'inversion basée sur l'inversion d'Etchopar permettant de reconstruire 5 sur 6 paramètres du tenseur des contraintes avec une quantification fine des incertitudes. Cette méthode permet de détecter automatiquement l'existence d'un ou de plusieurs évènements tectoniques enregistrés par le maclage de la calcite. Un deuxième volet de la thèse consiste en l'amélioration de la méthode d'acquisition des données de macles en utilisant un EBSD (electron backscatter diffraction). En effet, l'utilisation traditionnelle de la platine universelle a des limitations techniques et amène aussi à un doute visuel sur l'appréciation du statut non-maclé de certains plans, en plus du côté long et fastidieux. Le dernier volet de la thèse consiste à déterminer le seuil de maclage de la calcite pour différentes tailles de grains à l'aide de tests mécaniques sous une presse uniaxiale. Qui plus est, le suivi en continu des déformations sur les monocristaux de calcite a permis de mettre en évidence le comportement macroscopique d'un cristal de calcite et la séquence de maclage.