The low corrosion resistance of aluminum alloy materials in chloride environments limits their application in light metal structural components. In this study, 434 stainless steel (SS) powders with different numbers of scan layers were deposited on T6061 aluminum using high-velocity oxygen fuel (HVOF). Tafel curve, electrochemical impedance spectroscopy (EIS), salt spray, and galvanic corrosion tests were employed to investigate the comprehensive corrosion behavior of the SS coatings in a chlorine environment. The results showed that the porosity of the SS coatings decreased as the scanning layer increased. A lower porosity slowed the penetration of the corrosive solution and led to an enhanced long-term resistance to chloride attacks in immersion and salt spray corrosion. On this basis, the preferred SS4 sample and iron screw composition system was subjected to galvanic corrosion, and its electric current intensity (5.11 × 10−5 A) was two orders of magnitude lower than that of T6061 aluminum (9.14 × 10−3 A), as well as presenting better anti-corrosion behavior.
1 January 2022 in High Temperature Materials and Processes
In fire investigations, the most important aspect is determining the presence of a liquid accelerant at the fire scene. The presence or absence of accelerants is critical evidence during trials for fire cases. Upon exposure to high temperatures, metallic substances undergo oxidation, which can be imparted by accelerants in the fire. Oxides and substrates found on metal surfaces offer valuable information on the characteristics of fire, including exposure temperature, duration, and involvement of a liquid accelerant. In this study, we investigated the oxidation behavior of copper at high temperatures in a simulated flame environment using ethanol combustion. After oxidation, the morphological, oxide phase composition, and microstructural features of specimens were characterized by observation, X-ray diffraction, X-ray photoelectron energy spectroscopy, transmission electron microscopy, and scanning electron microscopy with energy-dispersive spectroscopic analysis. The elemental carbon with a hexagonal structure deposited on the sample’s surface was found, which may be incomplete combustion and the chemical composition of ethanol. Copper has a preferred orientation of oxide on the (111) crystal plane, which differs from oxidation in ordinary hot air that is related to the large Coulomb force of the (111) crystal plane. Hot air convection due to combustion may cause large areas of oxide layer on the copper surface to crack and peel. Oxide properties and surface state of metals strongly depended on oxidation duration, temperature, and atmosphere. These data shall offer reference information for determining the presence of combustion accelerants at fire scenes.