Hexavalent chromium (Cr(VI)) is a heavy metal that is highly soluble and exhibits toxic effects on biological systems. Nevertheless, it is used in many industrial applications. The adsorption process of Cr(VI), using activated carbon (AC), is under investigation globally. On the other hand, around six million tons of spent coffee is sent to landfill annually. In the spirit of cyclic economy, this research investigated the production of AC from spent coffee for the removal of Cr(VI) from wastewater. The AC was produced via pyrolysis process under a nitrogen atmosphere. Chemical activation using potassium hydroxide (KOH) occurred simultaneously with the pyrolysis process. The produced AC was tested as an absorber of Cr(VI). The best fitted kinetic model was the diffusion–chemisorption model. A 24-h adsorption experiment was carried out using a solution with a pH of 3 and an initial Cr(VI) concentration of 54.14 ppm. This resulted in an experimental maximum capacity of 109 mg/g, while the theoretical prediction was 137 mg/g. It also resulted in an initial adsorption rate (r_i) of 110 (mg/(g h)). The Brunauer–Emmett–Teller surface area (S_gBET) was 1372 m²/g, the Langmuir surface area (S_gLang.) was 1875 m²/g, and the corrugated pore structure model surface area (S_gCPSM) was 1869 m²/g. The micropore volume was 84.6%, exhibiting micropores at D_micro1 = 1.28 and D_micro2 = 1.6 nm. The tortuosity factor (τ) was 4.65.

Carbon into polymer nanocomposite is so far a common additive for the enhancement of the polymer properties. The properties of the polymer, such as thermal, and especially its mechanical properties, are improved by the homogeneously dispersed carbon nanoparticles on the polymer matrix. In this study, carbon wires in nano dimensions are, for the very first time, synthesized via the hard templating method from the silicate matrix MCM-41, and used as nano additives of polystyrene. The carbon nanowires were chemically oxidized, and further modified by attaching octadecylamine molecules, for the development of organic functionalities onto carbon nanowires surface. The nanocomposite materials of polystyrene with the modified carbon nanowires were prepared by a solution-precipitation method at three nano additive to polymer loadings (1, 3 and 5 wt%). The as-derived nanocomposites were studied with a combination of characterization and analytical techniques. The results showed that the thermal and mechanical properties of the polystyrene nanocomposites gradually improved while increasing nano-additive loading until 3 wt%. More specifically, the 3 wt% loading sample showed the best mechanical properties, while the 5 wt% sample was difficult to achieve satisfactory dispersion of carbon nanowires and consequently has a wide range of values.