Global industry is showing a great interest in the field of sustainability owing to the increased attention for ecological safety and utilization of renewable materials. For the scientific community, the challenge lies in the identification of greener synthetic approaches for reducing the environmental impact. In this context, we propose the preparation of novel biocomposites consisting of natural rubber latex (NRL) and sepiolite (Sep) fibers through the latex compounding technique (LCT), an ecofriendly approach where the filler is directly mixed with a stable elastomer colloid. This strategy favors a homogeneous dispersion of hydrophilic Sep fibers in the rubber matrix, allowing the production of high-loaded sepiolite/natural rubber (Sep/NR) without the use of surfactants. The main physicochemical parameters which control Sep aggregation processes in the aqueous medium were comprehensively investigated and a flocculation mechanism was proposed. The uniform Sep distribution in the rubber matrix, characteristic of the proposed LCT, and the percolative filler network improved the mechanical performances of Sep/NR biocomposites in comparison to those of analogous materials prepared by conventional melt-mixing. These outcomes indicate the suitability of the adopted sustainable procedure for the production of high-loaded clay–rubber nanocomposites with remarkable mechanical features.

Sepiolite (Sep)–styrene butadiene rubber (SBR) nanocomposites were prepared by using nano-sized sepiolite (NS-SepS9) fibers, obtained by applying a controlled surface acid treatment, also in the presence of a silane coupling agent (NS-SilSepS9). Sep/SBR nanocomposites were used as a model to study the influence of the modified sepiolite filler on the formation of immobilized rubber at the clay-rubber interface and the role of a self-assembled nanostructure in tuning the mechanical properties. A detailed investigation at the macro and nanoscale of such self-assembled structures was performed in terms of the organization and networking of Sep fibers in the rubber matrix, the nature of both the filler–filler and filler–rubber interactions, and the impact of these features on the reduced dissipative phenomena. An integrated multi-technique approach, based on dynamic measurements, nuclear magnetic resonance analysis, and morphological investigation, assessed that the macroscopic mechanical properties of clay nanocomposites can be remarkably enhanced by self-assembled filler structures, whose formation can be favored by manipulating the chemistry at the hybrid interfaces between the clay particles and the polymers.

Influence of different graphite-based nanofillers on crosslinking reaction of resorcinol, as induced by hexa(methoxymethyl)melamine, is studied. Curing reactions leading from low molecular mass compounds to crosslinked insoluble networks are studied by indirect methods based on Differential Scanning Calorimetry. Reported results show a catalytic activity of graphene oxide (eGO) on this reaction, comparable to that one already described in the literature for curing of benzoxazine. For instance, for an eGO content of 2 wt %, the exothermic crosslinking DSC peak (upon heating at 10 °C/min) shifted 6 °C. More relevantly, oxidized carbon black (oCB) is much more effective as catalyst of the considered curing reaction. In fact, for an oCB content of 2 wt %, the crosslinking DSC peak can be shifted more than 30 °C and a nearly complete crosslinking is already achieved by thermal treatment at 120 °C. The possible origin of the higher catalytic activity of oCB with respect to eGO is discussed.

Elastomer reinforcement with nanofillers has been a main rubber technology topic since the discovery of rubber vulcanization. Starting from carbon black, many researchers studied the correlations between the reinforcement of rubber and the colloidal properties of the reinforcing filler. The advent of silica allowed the experimentation of a playground of chemistries at the filler-rubber interface. In the increasing complexity of nowadays car manufacturer requests, reinforcing fillers play a pivotal role in determining the set of properties, which make a specific compound suitable for its applications. This effort of continuous improvement of rubber compound properties is pushing the tire industry towards novel solutions, and the silica/CB filler reinforcing technology will likely soon accept at least a third reinforcing filler as a major constituent of rubber compounds. While all major tire manufacturers build continuous knowledge on candidates such as carbon allotropes and 2-D nanoclays, Pirelli is paving the way for Sepiolite-derived nanofillers. Being Sepiolite naturally sourced, safe, and chemically playful, this unique 1-D phyllosilicate bears the promise of changing the game of elastomer nano-reinforcement, with the optional characteristic of giving mechanical anisotropy to the rubber compound. In this review, the historical progress on rubber reinforcement with sepiolite will be summarized, with an example of application in a commercially available Pirelli product, progenitor of the Smart-Net Silica^® technology.

Sulfur vulcanization is the most used method for curing of natural and synthetic rubbers. The crosslinking degree achieved is usually controlled by adding proper quantities of accelerants, activators, co-activators, retardants, and inhibitors, and influences the hardness, elasticity, hysteresis of elastomers and, consequently, the properties and behavior of the materials that incorporate them. Despite the fine tuning pursued over the years, sulfur crosslinking is still difficult to control both in terms of degree and homogeneity of cross-link. Addition of thermally activable bifunctional reagents able to crosslink the polymer matrix through covalent bonds could be a strategy to modulate and control finely the reticulation grade of elastomers. Tetrazoles can form highly reactive nitrilimines by thermal treatment at appropriate temperature, which can react with the vinyl double bonds present in the rubber. In this work a set of bis-tetrazoles were synthesized and those with the right activation temperatures were used for the curing of styrene-butadiene rubber, acting both as single crosslinkers and together with classic sulfur-based ones. The addition of bistetrazoles simplified and made more efficient the compounding process, allowing to prolong the mixing until optimum dispersion and homogeneity were obtained. Moreover, they led to an improvement in the hysteretic properties of the compound and to the reduction of the non-linearity of the dynamic behavior (Payne effect).