It is very important to analyze and study the motion process of droplets impacting superhydrophobic surface, which is of great significance to understand the mechanism of superhydrophobic surface and guide the design and manufacture of superhydrophobic surface. Taking by three-dimensional volume of fluid (VOF) simulation coupling coupled level set (CLS) algorithm, on the one hand, we simulate the morphological changes in the process of droplet impingement, as well as the internal velocity and the pressure distribution; on the other hand, we focus on the effects of droplet impact velocity, surface wettability, surface tension on the dynamics of the droplets. The CLSVOF model inherits the advantages of the VOF model for accurately constructing the phase interface and inherits the advantage that the level set can accurately calculate the surface tension, which improves the accuracy of the calculation of the droplet impact on the superhydrophobic surface. The computed results distinctly demonstrated there were four stages: falling, spreading, shrinking and rebounding. The time history of each stage agreed well with the pictures captured by high-speed camera, which indicated the computational fluid dynamics scheme was effective. Moreover, the motion mechanism of the droplets impacting on the solid surface is elaborated, which was helpful to control the solid–liquid interface to achieve a variety of solid interface characteristics.
Inspired by eagle-owl feather with characteristics of light weight and high strength, the bionic continuous carbon fiber-reinforced polylactic acid composite with barbicel structure was successfully 3D printed. Under the action of external load, angles between barbicels and rachis structure of eagle-owl feather decreased, which consumed a part of energy and built structure base of bionic feather structure model with a certain arrangement angle of continuous carbon fiber. Variation of bionic structure model design parameters significantly affected the mechanical properties of the 3D printing bionic composites. The relatively low continuous carbon fiber content on tensile force direction restricted enhancement of tensile strength of bionic composite. However, attributed to different angle arrangement of continuous carbon fiber, the propagation of cracks in bionic composite was hindered, exhibiting high impact resistance. The effective and feasible bionic feather design and 3D printing of continuous carbon fiber-reinforced polylactic acid composite extended the corresponding application in the areas with high impact loads.
Artificial muscle actuator has been devoted to replicate the function of biological muscles, playing an important part of an emerging field at inter-section of bionic, mechanical, and material disciplines. Most of these artificial muscles possess their own unique functionality and irreplaceability, but also have some disadvantages and shortcomings. Among those, phase change type artificial muscles gain particular attentions, owing to the merits of easy processing, convenient controlling, non-toxic and fast-response. Herein, we prepared a silicon/ethanol/(graphene oxide/gold nanoparticles) composite elastic actuator for soft actuation. The functional properties are discussed in terms of microstructure, mechanical properties, thermal imaging and mechanical actuation characteristics, respectively. The added graphene oxide and Au nanoparticles can effectively accelerate the heating rate of material and improve its mechanical properties, thus increasing the vaporization rate of ethanol, which helps to accelerate the deformation rate and enhance the actuation capability. As part of the study, we also tested the performance of composite elastomers containing different concentrations of graphene oxide to identify GO-15 (15 mg of graphene oxide per 7.2 mL of material) flexible actuators as the best composition with a driving force up to 1.68 N.
16 September 2020 in Microscopy Research and Technique