Nanoinks composed of quantum dots (QDs) are applied in light-receiving devices and light-emitting devices such as solar cells and displays. However, since the most widely used QDs, PbS and CdS, are toxic and environmentally concerning, alternative materials need to be developed. We synthesized and analyzed Ag chalcogenide nanoparticles, including AgBiS2 and Ag2S nanoparticles, which are eco-friendly materials. AgBiS2 and Ag2S QD films were prepared by spin-coating nanoparticle solutions and subsequent heat treatment. The effects of the heat treatment on residual ligands and photoluminescence were determined by surface analysis. The photocurrent response of the AgBiS2 and Ag2S QD films was measured in the near-infrared region, and the effect of the heat treatment temperature was investigated. The results indicate that AgBiS2 and Ag2S are prospective materials for near-infrared photodetectors.
Compact and highly sensitive near-infrared photodetectors that are operable at room temperature are required for light detection and ranging and medical devices. Two-dimensional (2D) PtSe2, a transition metal dichalcogenide, is a candidate material for near-infrared light detection. However, the photoresponse properties of 2D PtSe2 are currently inferior to those of commercial materials. The localized surface plasmon resonance of Au has been widely used for photoelectric field enhancement and in photochemical reactions associated with phase relaxation from plasmon states that occur at specific wavelengths. Spherical Au nanocolloids exhibit an extinction peak in the visible light region, whereas nanorods can be tuned to exhibit the extinction peak in the near-infrared region by controlling their aspect ratio. In this study, hybrid Au nanorod/2D PtSe2 structure was fabricated via spin coating nanorods, with plasmon peaks in the near-infrared region, on 2D PtSe2. Furthermore, the effect of the concentration of the nanorod solution on the photoresponse of nanorod/2D PtSe2 was investigated. The photocurrent of 5 nM Au nanorod-coated 2D PtSe2 was fivefold higher than that of bare 2D PtSe2. The responsivity was maximum 908 μW/A at 0.5 V bias voltage. In addition, the photocurrent enhancement mechanism by Au nanorods is discussed.
2D transition metal dichalcogenides (2D TMDCs) have thin and flexible structures and can be widely applied to nanoelectronics technology as a representative of 2D materials. Research studies on the surface functionalization of 2D TMDCs with nanoparticles have been actively conducted for fabrication of high-performance devices. Specifically, platinum (Pt) has attracted significant attention as a surface functionalization material in various applications, including photosensors, biosensors, and gas sensors due to its effective catalytic effect and excellent corrosion resistance. However, solution-based methods and PVD technologies, widely used for Pt nanoparticle synthesis, have difficulties forming fine particles dispersed on nanomaterials. Atomic layer deposition (ALD) is emerging as an advantageous method for forming nanoparticles, and dimethyl (N,N-dimethyl-3-buten-1-amine-N) platinum (DDAP) can overcome disadvantages of conventional ALD Pt precursors. In this study, we successfully synthesized Pt films using hydrogen as a new reactant in the DDAP-based ALD Pt process and evaluated formation of nanoparticles on SiO2/Si substrates. Subsequently, the ALD Pt-functionalized photodetector was fabricated with 2D WS2, a representative visible-light photodetector material, and improvement of photocurrent was confirmed by providing additional carriers via the localized surface plasmon resonance phenomenon. Furthermore, preferentially growing at high surface energy points, such as defects on WS2 nanosheets, can suppress the capture of photoexcited electrons by defects, consequently extending the carrier lifetime and preventing surface oxidation of the device. In the wavelength range of 500–1200 nm, the photoresponsivity of the ALD Pt-functionalized WS2 photodetector was improved more than 10–20 times compared to pristine WS2, and the response time was also noticeably improved. This study presents a novel approach to Pt functionalization using ALD, opening new possibilities for advanced nanodevice applications.