Vehicle driving safety is an important performance indicator for vehicles, and there is still much room for development in the active safety control of electric vehicles. Vehicles are susceptible to rollover when making sharp turns or overtaking at high speed. In order to improve the anti-rollover stability of electric vehicles (EV), this study proposes a real-time motor control strategy, mainly according to the acquisition of vehicle attitude data and real-time monitoring of the vehicle’s operating state. The lateral load transfer rate was defined as the vehicle rollover evaluation index. When the real-time rollover indicator exceeded the limit safety threshold this article set, the motor speed would be reduced through active control to avoid rollover or reduce the risk of rollover. Both simulation results in Carsim and Simulink showed that the motor control strategy is highly reliable and real-time capable, and the active safety of EV was improved significantly.

Vehicle driving safety is an important performance indicator for vehicles, and there is still much room for development in the active safety control of electric vehicles. A vehicle rollover is an important road traffic safety problem, as rollover accidents cause serious casualties and huge economic losses. It is very easy for vehicles in high-speed sharp turns or high-speed overtaking to roll over; in order to improve the vehicle in these conditions with the anti-rollover stability, this study proposed a real-time motor control strategy, mainly through the acquisition of vehicle attitude data and the use of multi-sensor fusion on the vehicle running state for real time. The lateral load transfer rate was used as the vehicle rollover evaluation index, and the test results indicate that when the real-time rollover index exceeds the set limit safety threshold, the motor speed is reduced through active control so that the vehicle avoids rollover accidents, or the risk of rollover is reduced. The STM32F103RET6 was used as the main chip for hardware design, control board fabrication, control program software design, and joint testing of software and hardware. The tests and data analysis prove that the motor control strategy is reliable in real time and can significantly improve the active safety of electric vehicles.