RF performance and intertier coupling of CMOS processed in 3-D sequential integration are investigated. pMOS transistor fabricated with a 500 °C thermal budget features good RF figures of merit with ${f}_{t} =105$ GHz and ${f}_{\text {max}} =175$ GHz for a gate length of 45 nm and ${V}_{\text {DD}} = -1$ V. Moreover, we demonstrate that the low- ${k}$ SiCO oxide spacer and low polysilicon gate resistance obtained with the low temperature process contribute to ${f}_{\text {max}}$ results that are better than high temperature process (above 1000°). Finally, we illustrate the crosstalk effects and the influence of the low-tier transistor gate voltage ${V}_{\text {G}}$ on the top-tier threshold voltage ${V}_{T}$ . We also show that a polysilicon ground shield integrated under the top-tier transistor substantially attenuates the intertier RF field coupling effects.
In this paper, we present a thorough analysis of parasitic coupling effects between different electrodes for a 3D Sequential Integration circuit example comprising stacked devices. More specifically, this study is performed for a Back-Side Illuminated, 4T–APS, 3D Sequential Integration pixel with both its photodiode and Transfer Gate at the bottom tier and the other parts of the circuit on the top tier. The effects of voltage bias and 3D inter-tier contacts are studied by using TCAD simulations. Coupling-induced electrical parameter variations are compared against variations due to temperature change, revealing that these two effects can cause similar levels of readout error for the top-tier readout circuit. On the bright side, we also demonstrate that in the case of a rolling shutter pixel readout, the coupling effect becomes nearly negligible. Therefore, we estimate that the presence of an inter-tier ground plane, normally used for electrical isolation, is not strictly mandatory for Monolithic 3D pixels.