In recent years, basalt-fiber-reinforced polymers (BFRPs) have been widely used in the field of corrosive aging resistance. In this paper, BFRPs are made into composite laminates, and the flexural properties of BFRPs modified with different types of silane coupling agents, KH550 (aminopropyl-triethoxysilane), KH560 (glycidyletheroxypropyl-trimethoxysilane), and A171 (vinyl-trimethoxysilane), immersed at 20 °C, 40 °C, and 60 °C in a 3.5% NaCl concentration artificial seawater, a 10% NaCl high-concentration artificial seawater, 10% H₂SO₄, or 10% NaOH are investigated. The results show that the flexural strength decreased with increasing exposure time in corrosive aging environments at different temperatures. The temperature greatly influences flexural strength, and the flexural strength decreases rapidly in high-temperature acidic and alkaline environments. In addition, we found that the flexural retention in the seawater environment did not change much compared to that in the water environment, indicating that BFRPs have relatively good resistance to seawater corrosion. The silane coupling agent modification enhances flexural strength and flexural strength retention by enhancing the interfacial bonding property of the BFRPs. Considering the experimental results, the three silane coupling agents modified the corrosive aging performance of the composites in the order of KH550 > KH560 > A171. This will provide theoretical support for the application of silane-coupling-agent-modified BFRPs in corrosive aging environments.

Sustainability has become a vital issue in the textile and garment industry

In this paper, glass fiber fabric reinforced polyphenylene sulfide composites were prepared by hot pressing. The effects of glass fibre modification and hot pressing temperature on the properties of the composites were investigated using a scanning electron microscope, infrared spectrometer, universal testing machine, and DIGEYE digital imaging colour measurement system. The results show that after the treatment with a silane coupling agent, the silane coupling agent was more uniformly distributed on the surface of the glass fibres, and the bonding effect between the glass fibre fabric and polyphenylene sulphide was significantly improved. The strength of the composites increased and then decreased with the increase of hot pressing temperature, and the surface colour of the composites became darker and darker. When the hot-pressing temperature is 310 °C, the mechanical properties of glass fabric-reinforced polyphenylene sulfide composites are at their best, the tensile strength reaches 51.9 MPa, and the bending strength reaches 78 MPa.

Glass fibre-reinforced polyphenylene sulphide composites were prepared by hot-pressing glass fibre fabrics and polyphenylene sulphide resins. The effects of different polyphenylene sulphide resin forms on the properties of the composites were investigated using scanning electron microscopy, dynamic mechanical analyser, pendulum impact tester and universal testing machine. The results showed that different polyphenylene sulphide resin forms had nearly no effect on the glass transition temperature of the composites, which are all located at about 100 °C. Compared with other polyphenylene sulphide composites, the bending strength of polyphenylene sulphide film composites was the highest, reaching 314.58 MPa, and the impact strength of polyphenylene sulphide particle composites was the highest, reaching 245.4 KJ/m². The bending strength and impact strength were calculated using a standard fraction, and the highest standard fraction was obtained when the ratio of polyphenylene sulphide film to particle was 1:2. The impact strength and bending strength could be obtained. The impact strength reached 229.8 KJ/m², and the bending strength reached 284.16 MPa.

Currently, the methods to identify leather materials have limitations, and identifying natural leather types is also relatively complex. In this research, the microstructures of four types of mammalian leathers (cattle leather, pig leather, sheep leather, and deer leather), three kinds of reptilian leathers (crocodile leather, lizard leather, and snake leather) and regenerated leather were characterized by scanning electron microscopy. The spectral curves (from 900 to 1700 nm) of these leather samples were extracted using a hyperspectral imaging system, and their spectral characteristics were analyzed. A method of leather identification by the hyperspectral imaging system combined with chemometrics was established. The results showed that the spectral curves of natural and regenerated leather differed in the number, position, and depth of the characteristic peaks, enabling the classification of regenerated leather by comparative analysis with the naked eye. The first-order derivative processing–principal component analysis–discriminant analysis model achieved a 98% correct classification rate, confirming the hyperspectral imaging system’s feasibility in the leather material identification field. We believe that his research is beneficial for the leather industry to understand the classifications scientifically, in order to protect consumer rights and further develop the leather testing industry.

The purpose of this study is to use acoustic emission (AE) technology to explore the changes in the interface and mechanical properties of GF/VER composite materials after being treated with NaOH and to analyze the optimal modification conditions and damage propagation process. The results showed that the GF surface became rougher, and the number of reactive groups increased after treating the GF with a NaOH solution. This treatment enhanced the interfacial adhesion between the GF and VER, which increased the interfacial shear strength by 25.31% for monofilament draw specimens and 27.48% for fiber bundle draw specimens compared to those before the GF was modified. When the modification conditions were a NaOH solution concentration of 2 mol/L and a treatment time of 48 h, the flexural strength of the GF/VER composites reached a peak value of 346.72 MPa, which was enhanced by 20.96% compared with before the GF was modified. The process of damage fracture can be classified into six types: matrix cracking, interface debonding, fiber pullout, fiber relaxation, matrix delamination, and fiber breakage, and the frequency ranges of these failure mechanisms are 0~100 kHz, 100~250 kHz, 250~380 kHz, 380~450 kHz, 450~600 kHz, and 600 kHz and above, respectively. This paper elucidates the fracture process of GF/VER composites in three-point bending. It establishes the relationship between the AE signal and the interfacial and force properties of GF/VER composites, realizing the classification of the damage process and characterizing the mechanism. The frequency ranges of damage types and failure mechanisms found in this study offer important guidance for the design and improvement of composite materials. These results are of great significance for enhancing the interfacial properties of composites, assessing the damage and fracture behaviors, and implementing health monitoring.