Popularity of zirconia gained up after discovering the unique properties of zirconia called transformation toughening. Alumina is one of material used to stabilize tetragonal crystalline of zirconia in room temperature. In this study, zirconia-alumina systems have been developed in two ways mixing methods through sol-gel technique. First method was done by mixing both precursors of zirconia and alumina in the hydrolysis stage, while the second method was in the drying stage of the sol-gel technique. Phase of material was solution at hydrolisis stage and solid at drying stage. Zirconia-alumina system having the ratio 90:10 by weight (ZrO2:Al2O3). The mixture were calcined at temperature 900 °C for 2 hours. Samples were than characterized by X-Ray Diffraction to assign tetragonal crystallline of zirconia. Scanning Electron Microscope and Brunauer-Emmett-Teller characterization were conducted to observe morphology, particle size as well as surface area of samples. XRD characterization of solution phase mixing sample exhibited 94.5% tetragonal crystalline and 5.5% monoclinic crystalline. The solid phase mixing sample were 25.3% tetragonal crystalline and 74.7% monoclinic crystalline. SEM characterization showed agglomeration for both samples with particle size 8.72 µm for solution mixing method and 11.17 µm for solid mixing method. However, nano size particle were also identified. Surface area of mixed oxide are 14.164 m2/g and 13.996 m2/g respectively. As a conclusion, this results confirmed that solution mixing method was more effective to produce tetragonal crystalline of zirconia than solid phase mixing method.
23 September 2024 in Physics and Chemistry of Solid State
The materials for medical application are normally consisted of metal, ceramic, and polymer. Each material has its own limitations such as corrosion in metal, the brittleness of ceramic, and the high temperature problem of polymer. To eliminate their weakness, combining one or more respective materials are encouraged, which termed as composite. One of the emerging composite materials that can be utilized in medical application are geopolymer, which is an inorganic polymer material consisted of aluminosilicate sources such as metakaolin and sol-gel synthesized material and alkali activator consisted of strong alkali hydroxide and sodium silicate solution. This review paper elaborated the raw materials, alkali activators, and admixture for geopolymer, and the application of geopolymer-based material for medical purposes. We also discuss the prospective and challenges of geopolymer for the medical field. The adjustable strength and porosity make this material versatile for coating substrates to become bone scaffold material. However, the concern remains about the leaching and high alkalinity of geopolymers. This could be improved by reducing the molarity of sodium hydroxide and mixing geopolymer with compounds to trap the harmful leachate agent inside and studying different solutions for the activation of geopolymer.
28 May 2024 in Physics and Chemistry of Solid State
Air Cooled Slag and Granulated Blast Furnace Slag is a waste material from steelmaking process that not utilized, even though it rich in silica and CaO that can increase mechanical properties of building materials. Therefore, this material is potential as substitutor for geopolymer. Geopolymer is an alkali activated material consists of aluminosilicate precursor activated by NaOH and waterglass as activator. One of the common aluminosilicate binder used is fly ash. Geopolymer was made by mixing fly ash and air cooled slag or granulated blast furnace slag in certain ratio with alkali activator solution. The aim for this study is to obtain the best ratio of slag to fly ash binder that produces the highest compressive strength. The best compressive strength was 29.80 MPa achieved in fly ash:air cooled slag 40:60 ratio and 31.33 MPa achieved in fly ash:granulated blast furnace slag 40:60 ratio. X-Ray Diffraction test showed the appearance of anorthite (Ca, Na (Al, Si)4 O8). FTIR characterization showed the appearance of siloxo and sialate bonding which commonly found in geopolymerization.
AISI-410-3Mo-3Ni is martensitic stainless steel that has been applied in various industrial equipment, such as oil and gas pipelines, turbine blades, and coolin