The design of an upper limb rehabilitation robot for post-stroke patients is considered a benchmark problem regarding improving functionality and ensuring better human–robot interaction (HRI). Existing upper limb robots perform either joint-based exercises (exoskeleton-type functionality) or end-point exercises (end-effector-type functionality). Patients may need both kinds of exercises, depending on the type, level, and degree of impairments. This work focused on designing and developing a seven-degrees-of-freedom (DoFs) upper-limb rehabilitation exoskeleton called ‘u-Rob’ that functions as both exoskeleton and end-effector types device. Furthermore, HRI can be improved by monitoring the interaction forces between the robot and the wearer. Existing upper limb robots lack the ability to monitor interaction forces during passive rehabilitation exercises; measuring upper arm forces is also absent in the existing devices. This research work aimed to develop an innovative sensorized upper arm cuff to measure the wearer’s interaction forces in the upper arm. A PID control technique was implemented for both joint-based and end-point exercises. The experimental results validated both types of functionality of the developed robot.

Home-based hand rehabilitation has excellent potential as it may reduce patient dropouts due to travel, transportation, and insurance constraints. Being able to perform exercises precisely, accurately, and in a repetitive manner, robot-aided portable devices have gained much traction these days in hand rehabilitation. However, existing devices fall short in allowing some key natural movements, which are crucial to achieving full potential motion in performing activities of daily living. Firstly, existing exoskeleton type devices often restrict or suffer from uncontrolled wrist and forearm movement during finger exercises due to their setup of actuation and transmission mechanism. Secondly, they restrict passive metacarpophalangeal (MCP) abduction–adduction during MCP flexion–extension motion. Lastly, though a few of them can provide isolated finger ROM, none of them can offer isolated joint motion as per therapeutic need. All these natural movements are crucial for effective robot-aided finger rehabilitation. To bridge these gaps, in this research, a novel lightweight robotic device, namely “Flexohand”, has been developed for hand rehabilitation. A novel compliant mechanism has been developed and included in Flexohand to compensate for the passive movement of MCP abduction–adduction. The isolated and composite digit joint flexion–extension has been achieved by integrating a combination of sliding locks for IP joints and a wire locking system for finger MCP joints. Besides, the intuitive design of Flexohand inherently allows wrist joint movement during hand digit exercises. Experiments of passive exercises involving isolated joint motion, composite joint motions of individual fingers, and isolated joint motion of multiple fingers have been conducted to validate the functionality of the developed device. The experimental results show that Flexohand addresses the limitations of existing robot-aided hand rehabilitation devices.

Introduction: The aim of this research is to develop a robot-assistive training approach for the disabled individuals with impaired upper limb functions. People with impaired upper limb function can regain their motor functionality undergoing intense rehabilitation exercises. With increasing number of disabled individuals, we face deficiency in the number of expert therapists. One promising remedy could be the use of robotic assistive devices. Method: To instruct and demonstrate rehabilitation exercise, this research used NAO robot. A library of recommended rehabilitation exercises involving shoulder (i.e., abduction/adduction, vertical flexion/extension, and internal/external rotation), and elbow (i.e., flexion/extension) joint movements was formed in Choregraphe (graphical programming interface). For this purpose, a kinematic model of human upper-extremity was developed based on modified Denavit-Hartenberg notations. Result: In experiments, NAO robot gave voice instruction and was maneuvered to cooperate and demonstrate the exercises from the library. NAO also plays some complex game with the subject that represents a multi-joint movement's exercise, which was also included in the library. Conclusions: Experimental results with healthy participants reveal that the NAO robot can successfully instruct and demonstrate upper-extremity rehabilitation exercises for single and multi-joint movements. It implies a technical development of cooperative rehabilitation system for which target group will be individuals with upper limb impairment.

In this paper, we focus on the human upper limb rehabilitation scheme that utilizes the concept ofteleoperation. Teleoperation can help the therapist demonstrate different rehab exercises to a different group of people at the same time remotely. Different groups of people from a different place connected to the same network can get therapy from the same therapist at the same time using the telerehabilitation scheme. Here, we presented a humanoid robot NAO that can be operated remotely by a therapist to demonstrate the exercise to a patient. To mimic the movement demonstrated by the therapist, Kinect V2 sensor which is a markerless vision-based motion-tracking device, was used. Modified Denavit-Hartenberg (DH) convention was used for the kinematic modeling of the human upper arm. From the Kinect data, a geometric solution was developed to find a unique inverse kinematic solution of human upper-extremity. Experimental results revealed that NAO could be teleoperated successfully to instruct and demonstrate patients to perform different arm movement exercises in real-time.

The research presents a novel controller designed for robotic systems subject to nonlinear uncertain dynamics and external disturbances. The control scheme is based on the modified super-twisting method, input/output feedback linearization, and time delay approach. In addition, to minimize the chattering phenomenon and ensure fast convergence to the selected sliding surface, a new reaching law has been integrated with the control law. The control scheme aims to provide high performance and enhanced accuracy via limiting the effects brought by the presence of uncertain dynamics. Stability analysis of the closed-loop system was conducted using a powerful Lyapunov function, showing finite time convergence of the system’s errors. Lastly, experiments shaping rehabilitation tasks, as performed by healthy subjects, demonstrated the controller’s efficiency given its uncertain nonlinear dynamics and the external disturbances involved.