Solar-driven evaporation based on photothermal membrane has been proved to be promising in the field of fresh water generation, and it is considered as an emerging strategy both in laboratory and in industrial scales. However, further research efforts have to be made on light harvesting and thermal management to improve water evaporation. In this study, an extensive research was carried out to develop a bio-inspired 3D photothermal cone for high-efficiency solar-driven evaporation with minimum light reflection and heat loss to bulk water. The artificial photothermal cone with a polypyrrole (PPy) coating layer was facilely fabricated via chemical vapor deposition polymerization (CVDP). The present 3D cone with a rationally designed conical structure exhibited satisfactory absorbance around 99.2% in the entire solar spectrum, which is comparable with the performances of super-black materials. Additionally, the heat loss has been minimized by elevating the photothermal cone to narrow the contact area between water and the PPy-based cone with good wettability, thus achieving a highly efficient interface heating. The solar conversion efficiency up to 93.8% for evaporation was achieved for the photothermal cone under one sun illumination, which is about 1.7 times as high as the result obtained for a plane film. Based on our results, controlling the 3D morphology can be considered as an important strategy for designing a novel high-efficiency photothermal membrane and also, it provides new opportunities in practical application.

Solar-driven water evaporation assisted by photothermal membranes is considered as one of the sustainable and cost-effective strategies for pure water generation and wastewater treatment. Herein, we report a facile but effective approach to improve the photothermal performance by combining 2D reduced graphene oxide (rGO) and 1D multi-walled carbon nanotubes (MWCNTs), which have different nanomorphologies. The photothermal layer can be easily deposited on different substrate materials via simple vacuum assistance. Such a composite photothermal layer shows a rough surface with a controllable nano-structure, which can thus optimize solar light harvesting. On the other hand, the formation of a loose internal porous structure and suitable wettability ensure water transport inside the photothermal layer during evaporation. The surface temperature reaches as high as 78 °C even under one sun irradiation (1 kW m⁻²), which is 10 °C higher than the result of pure rGO membranes. When loaded on a PVDF substrate, the rGO–MWCNT based membrane is flexible and shows an obvious improvement in the evaporation rate, about 79.0% and 8.9% higher than those of pure rGO and MWCNT membranes, respectively. The solar thermal conversion efficiency can reach up to 80.4% without any extra accessory for thermal management. Based on our results, the nanocomposite strategy is facile and effective for the development of novel photothermal membranes for high-efficiency evaporation, and contributes to the widespread application in the fields of desalination and wastewater treatment.

Solar-driven water evaporation has been emerging as a highly efficient way for utilizing solar energy for clean water production and wastewater treatment. Here we rationally designed and fabricated a bi-layered photothermal membrane with a porous film of reduced graphene oxide (rGO) on the top and polystyrene (PS) foam at the bottom. The top porous rGO layer acts as a light absorber to harvest and convert light efficiently to thermal energy and the bottom PS layer, which purposefully disintegrates water transport channels, acts as an excellent thermal barrier to minimize heat transfer to the nonevaporative bulk water. The optimized bi-layered membrane was able to produce water evaporation rate as high as 1.31 kg m⁻² h⁻¹ with light to evaporation conversion efficiency as high as 83%, which makes it a promising photothermal material in the literature. Furthermore, the experiments and theoretical simulation were both conducted to examine the relationship between the overall energy efficiency and the depth of the photothermal material underwater and the experimental and simulations results coincided with each other. Therefore, this work provides systematic evidence in support of the concept of the interfacial heating and shines important light on practical applications of solar-driven processes for clean water production.

Fog water collection represents a meaningful effort in places where regular water sources, including surface water and ground water, are scarce. Inspired by the amazing fog water collection capability of the Stenocara beetles in the Namib Desert and based on the recent work in biomimetic water collection, this work reports a facile, easy-to-operate, and low-cost method for the fabrication of a hydrophilic–superhydrophobic patterned hybrid surface towards highly efficient fog water collection. The essence of the method is incorporating a (super)hydrophobically modified metal-based gauze onto the surface of a hydrophilic polystyrene (PS) flat sheet by a simple lab oven-based thermal pressing procedure. The produced hybrid patterned surfaces consisted of PS patches sitting within the holes of the metal gauzes. The method allows for easy control over the pattern’s dimensions (e.g., patch size) by varying the gauze mesh size and the thermal pressing temperature, which is then translated into the easy optimization of the ultimate fog water collection efficiency. Given the low-cost and wide availability of both PS and the metal gauze, this method has great potential for scaling-up. The results showed that the hydrophilic–superhydrophobic patterned hybrid surfaces with a similar pattern size to the Stenocara beetles's back pattern produced a significantly higher fog collection efficiency than the uniformly (super)hydrophilic or (super)hydrophobic surfaces. This work contributes to the general effort in fabricating mixed wettability patterned surfaces for atmospheric water collection for direct use.