Human–robot collaborative applications have been receiving increasing attention in industrial applications. The efficiency of the applications is often quite low compared to traditional robotic applications without human interaction. Especially for applications that use speed and separation monitoring, there is potential to increase the efficiency with a cost-effective and easy to implement method. In this paper, we proposed to add human–machine differentiation to the speed and separation monitoring in human–robot collaborative applications. The formula for the protective separation distance was extended with a variable for the kind of object that approaches the robot. Different sensors for differentiation of human and non-human objects are presented. Thermal cameras are used to take measurements in a proof of concept. Through differentiation of human and non-human objects, it is possible to decrease the protective separation distance between the robot and the object and therefore increase the overall efficiency of the collaborative application.
The increasing amount of Internet of Things (IoT) devices and wearables require a reliable energy source. Energy harvesting can power these devices without changing batteries. Three-dimensional printing allows us to manufacture tailored harvesting devices in an easy and fast way. This paper presents the development of hybrid and non-hybrid 3D printed electromagnetic vibration energy harvesters. Various harvesting approaches, their utilised geometry, functional principle, power output and the applied printing processes are shown. The gathered harvesters are analysed, challenges examined and research gaps in the field identified. The advantages and challenges of 3D printing harvesters are discussed. Reported applications and strategies to improve the performance of printed harvesting devices are presented.
In this contribution, we present a novel additive manufactured sensitive gripper jaw based on strain gauge technology for extended gripping force ranges in robotics up to 40 N using Fused Layer Manufacturing. The present sensor design is based on an arbitrary number of bending beams arranged one above the other, based on a single point load cell. With this multiple bending beam structure, it is possible to individually reduce the mechanical stresses while maintaining the same deflection of the gripper jaw and enabling parallel gripping of parts. By varying the number of bending beams, it is also possible to adapt the measurement range accordingly. The investigations focus on the general sensor design, the fabrication process, and the sensor behavior in terms of zero-point deviation, characteristic value deviation, linearity behavior, repeatability, and viscoelastic behavior. The results show that higher gripping force measurement ranges are possible with good sensor linearity of 0.14 % of full scale. The arising viscoelastic behavior can be attributed to the properties of plastics. Nevertheless, this sensor is suitable for gripping force measurement in most industrial robot applications.