Purpose: A computational fluid dynamics (CFD) analysis has been carried out on the aerodynamic and thermal behavior of an incompressible Newtonian fluid having a constant property and flowing turbulently through a two-dimensional horizontal high-performance heat transfer channel with a rectangular cross section. The top surface of the channel was kept at a constant temperature, while it was made sure to maintain the adiabatic condition of the bottom surface. Two obstacles, with different shapes, i.e. flat rectangular and V-shaped, were inserted into the channel; they were fixed to the top and bottom surfaces of the channel in a periodically staggered manner to force vortices to improve the mixing and consequently the heat transfer. The first fin-type obstacle is placed on the heated top channel surface, and the second baffle-type one is placed on the insulated bottom surface. Five different obstacle situations were considered in this study, which are referred as cases FF (flat fin and flat baffle), FVD (flat fin and V-downstream baffle), FVU (flat fin and V-upstream baffle), VVD (V-downstream fin and V-downstream baffle) and VVU (V-Upstream fin and V-upstream baffle). Design/methodology/approach: The flow model is governed by Reynolds-averaged Navier–Stokes equations with the k-epsilon turbulence model and the energy equation. These governing equations are discretized by the finite volume method, in two dimensions, using the commercial CFD software FLUENT software with the Semi Implicit Method for Pressure Linked Equations (SIMPLE) algorithm for handling the pressure-velocity coupling. Air is the test fluid with the flow rate in terms of Reynolds numbers ranging from 12,000 to 32,000. Findings: Important deformations and large recirculation regions were observed in the flow field. A vortex causes a rotary motion inside the flow field, which enhances the mixing by bringing the packets of fluid from the near-wall region of the channel to the bulk and the other way around. The largest value of the axial variations of the Nusselt number and skin friction coefficient is found in the region facing the baffle, while the smallest value is in the region near the fin, for all cases. The thermal enhancement factor (TEF) was also introduced and discussed to assess the performance of the channel for various obstacle situations. It is found that the TEF values are 1.273-1.368, 1.377-1.573, 1.444-1.833, 1.398-1.565 and 1.348-1.592 for FF, FVD, FVU, VVD and VVU respectively, depending on the Re values. In all cases, the TEF was found to be much larger than unity; its maximum value was around 1.833 for FVU at the highest Reynolds number. Therefore, the FVU may be considered as the best geometrical configuration when using the obstacles to improve the heat transfer efficiency inside the channel. Originality/value: This study can be a real application in the field of shell-and-tube heat exchangers and flat plate solar air collectors.

Purpose: The purpose of this paper is to carry out a numerical study on the dynamic and thermal behavior of a fluid with a constant property and flowing turbulently through a two-dimensional horizontal rectangular channel. The upper surface was put in a constant temperature condition, while the lower one was thermally insulated. Two transverse, solid-type obstacles, having different shapes, i.e. flat rectangular and V-shaped, were inserted into the channel and fixed to the top and bottom walls of the channel, in a periodically staggered manner to force vortices to improve the mixing, and consequently the heat transfer. The flat rectangular obstacle was put in the first position and was placed on the hot top wall of the channel. However, the second V-shaped obstacle was placed on the insulated bottom wall, at an attack angle of 45°; its position was varied to find the optimum configuration for optimal heat transfer. Design/methodology/approach: The fluid is considered Newtonian, incompressible with constant properties. The Reynolds averaged Navier–Stokes equations, along with the standard k-epsilon turbulence model and the energy equation, are used to control the channel flow model. The finite volume method is used to integrate all the equations in two-dimensions; the commercial CFD software FLUENT along with the SIMPLE-algorithm is used for pressure-velocity coupling. Various values of the Reynolds number and obstacle spacing were selected to perform the numerical runs, using air as the working medium. Findings: The channel containing the flat fin and the 45° V-shaped baffle with a large Reynolds number gave higher heat transfer and friction loss than the one with a smaller Reynolds number. Also, short separation distances between obstacles provided higher values of the ratios Nu/Nu₀ and f/f₀ and a larger thermal enhancement factor (TEF) than do larger distances. Originality/value: This is an original work, as it uses a novel method for the improvement of heat transfer in completely new flow geometry.

Purpose: This paper aims to report the results of numerical analysis of turbulent fluid flow and forced-convection heat transfer in solar air channels with baffle-type attachments of various shapes. The effect of reconfiguring baffle geometry on the local and average heat transfer coefficients and pressure drop measurements in the whole domain investigated at constant surface temperature condition along the top and bottom channels’ walls is studied by comparing 15 forms of the baffle, which are simple (flat rectangular), triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, double V (or W), Z, T, G and epsilon (or e)-shaped, with the Reynolds number changing from 12,000 to 32,000. Design/methodology/approach: The baffled channel flow model is controlled by the Reynolds-averaged Navier–Stokes equations, besides the k-epsilon (or k-e) turbulence model and the energy equation. The finite volume method, by means of commercial computational fluid dynamics software FLUENT is used in this research work. Findings: Over the range investigated, the Z-shaped baffle gives a higher thermal enhancement factor than with simple, triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, W, T, G and e-shaped baffles by about 3.569-20.809; 3.696-20.127; 3.916-20.498; 1.834-12.154; 1.758-12.107; 7.272-23.333; 6.509-22.965; 8.917-26.463; 8.257-23.759; 5.513-18.960; 8.331-27.016; 7.520-26.592; 6.452-24.324; and 0.637-17.139 per cent, respectively. Thus, the baffle of Z-geometry is considered as the best modern model of obstacles to significantly improve the dynamic and thermal performance of the turbulent airflow within the solar channel. Originality/value: This analysis reports an interesting strategy to enhance thermal transfer in solar air channels by use of attachments with various shapes

An attempt is made to improve the overall performances of channel heat exchangers. The techniques of baffles and nanofluids are combined to enhance the dynamic and thermal behaviors within the channel exchanger. Baffles under various attack angles are used as vortex generators. In addition, oil/multiwalled carbon nanotubes (MWCNT) is used as a working fluid. Both inclinations in the upstream and downstream directions were considered, referenced as Case A (UIB) and Case B (BIB), respectively. While the channel equipped with vertical baffles is referenced as Case C. The proposed models with combined techniques allowed a considerable enhancement in the overall efficiency. The comparison between the three cases revealed that the most significant value of thermal enhancement factor (TEF) of 5.634 was reached with vertical baffles (Case C) at the highest value of Reynolds number. When using inclined baffles, the 75° upstream attack angle (Case A) allowed the highest TEF of 4.814, compared with Case B.