The depth to bedrock controls a myriad of processes by influencing subsurface flow paths, erosion rates, soil moisture, and water uptake by plant roots. As hillslope interiors are very difficult and costly to illuminate and access, the topography of the bedrock surface is largely unknown. This essay is concerned with the prediction of spatial patterns in the depth to bedrock (DTB) using high‐resolution topographic data, numerical modeling, and Bayesian analysis. Our DTB model builds on the bottom‐up control on fresh‐bedrock topography hypothesis of Rempe and Dietrich (2014) and includes a mass movement and bedrock‐valley morphology term to extent the usefulness and general applicability of the model. We reconcile the DTB model with field observations using Bayesian analysis with the DREAM algorithm. We investigate explicitly the benefits of using spatially distributed parameter values to account implicitly, and in a relatively simple way, for rock mass heterogeneities that are very difficult, if not impossible, to characterize adequately in the field. We illustrate our method using an artificial data set of bedrock depth observations and then evaluate our DTB model with real‐world data collected at the Papagaio river basin in Rio de Janeiro, Brazil. Our results demonstrate that the DTB model predicts accurately the observed bedrock depth data. The posterior mean DTB simulation is shown to be in good agreement with the measured data. The posterior prediction uncertainty of the DTB model can be propagated forward through hydromechanical models to derive probabilistic estimates of factors of safety.
In this study, the performance of two steel slag byproducts is investigated to produce mixtures for base layers of unpaved roads. The basic physical properties including Atterberg limits, grain size distribution, California bearing ratio and expansion tests of eight different mixtures of soil-byproduct are investigated in laboratory to understand the engineering properties of the mixtures. The byproducts are mixed in different proportions from 50% to 80% by weight with a local (clayey) subgrade soil. Subsequently, two selected mixtures are used to build an experimental road section along an unsurfaced road. Results demonstrate that the gradation and strength of the samples satisfy the requirements for base layers. Furthermore, the mixtures are shown to be of low-plasticity at higher byproduct content and non-expansive. Field investigations show that 12 roller passes at the standard Proctor and 14 at the intermediate Proctor are enough to reach 100% of the degree of compaction.
1 October 2022 in Engineering Applications of Artificial Intelligence