SImon Hesp

Dr. SImon Hesp

Department of Chemistry, Queen’s University, Kingston, ON K7L 3N6, Canada

Research Focus & Metrics

Academic Career Length

34Years (1993-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 July 2010 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
SHSImon Hesp
SImon Hesp
HSHerbert F. Shurvell
Herbert F. Shurvell
This paper documents the discovery of waste engine oil residues in pavements across Ontario, Canada. We have found that recovered asphalts from a large majority of poorly performing contracts test positive for zinc through X-ray fluorescence (XRF) analysis. In contrast, neither the aggregates nor any of the well-performing asphalts showed any signs of the metal. Since zinc dialkyldithiophosphates are universal additives in engine oils, we inferred that the use of waste oil residues in asphalt must be widespread. Further analysis of 2008 quality assurance samples taken for the Ontario Ministry of Transportation substantiated this, with most samples testing positive for zinc. XRF analysis of straight waste oil residues suggests that typical modification levels are in the 5–20% range. The damaging effect of this additive through increased physical and chemical hardening is briefly discussed with reference to previous studies on unexplained, premature and excessive thermal cracking.

13 May 2009 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
SHSImon Hesp
SImon Hesp
ASAbdolrasoul Soleimani
Abdolrasoul Soleimani
SSSathish Subramani
Sathish Subramani
TPTed Phillips
Ted Phillips
DSDale Smith
Dale Smith
KTKai K. Tam
Kai K. Tam
This paper documents an investigation of the performance of 20 pavement contracts in eastern and northeastern Ontario, Canada. Eleven of these pavements showed little or no distress after 7–15 years in service. The remaining nine, aged between 7 and 13 years, all cracked prematurely and excessively. Creep testing of the recovered asphalt cements, according to an extended bending beam rheometer protocol, revealed that the long-life pavements were made with materials that suffered little from reversible ageing mechanisms during cold conditioning. Ductile failure testing in a double-edge notched tension test at 15°C revealed equally significant differentiation, with the superior performing materials possessing considerably higher strain tolerances. The newly developed methods were able to explain vast performance differences with 95% accuracy. This study further validates Ontario's interest in an improved asphalt cement grading approach and provides evidence that thin pavements can have long lives, provided the asphalt cement is selected properly.

1 September 2006 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
MZMichael Ou Zhao
Michael Ou Zhao
SHSImon Hesp
SImon Hesp
This paper documents and discusses an investigation into the improved performance grading of asphalt binders that were used in the Canadian Strategic Highway Research Program (C-SHRP) pavement trial in Lamont, Alberta. Binders were assessed for their tendency to reversibly age at low-temperatures. While the correlation between cracking severity and regular AASHTO M320 and MP1a grades was weak (r 2=0.73 and 0.49, respectively), the predictive ability of the BBR method increased significantly when binders were tested after 1, 3 and 8 days of conditioning (r 2=0.94–0.97). Brittle and ductile fracture energies were measured in single-edge-notched bending (SENB) and double-edge-notched tension (DENT), respectively. In the brittle state, the SENB test revealed little difference between the binders. However, in the ductile state, the DENT test revealed significant differences between materials, with binders that showed the least amount of cracking having the highest works of fracture at 0°C.

14 June 2022 in Construction and Building Materials
Verified
Journal Article
Closed access
JKJen Kovinich
Jen Kovinich
AKAiden Kuhn
Aiden Kuhn
AWAlison Wong
Alison Wong
Haibo DingHaibo Ding
Haibo Ding
SHSImon Hesp
SImon Hesp

13 July 2009 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
AAAdrian Andriescu
Adrian Andriescu
SHSImon Hesp
SImon Hesp
This paper documents and discusses an investigation into the time–temperature superposition principle as it relates to ductile failure in asphalt. Seven binders of approximately the same low and intermediate temperature and varying high temperature Superpave® grades were tested in a dynamic shear rheometer (DSR) and double-edge-notched tension test to determine their rheological and failure energy master curves. Master curves typically permit the prediction of rheological properties at very long or short timescales from measurements at higher or lower test temperatures over more accessible testing timescales. It has been suggested in the Strategic Highway Research Program final report A-369 that rheological shift factors obtained from a DSR experiment can be used to predict failure master curves from experimentally accessible data at various temperatures. The findings of this study suggest that this substitution is not generally accurate. For straight asphalt binders the difference can be relatively small but for more highly modified materials serious errors would be introduced.

23 October 2017 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
ARAmanda Rigg
Amanda Rigg
ADAlistair Duff
Alistair Duff
YNYihua Nie
Yihua Nie
MSMichael Somuah
Michael Somuah
NTNathaniel Tetteh
Nathaniel Tetteh
SHSImon Hesp
SImon Hesp
The AASHTO M320 specification for thermal cracking – meant to limit damaging temperatures to only a 1 in 50 risk in any given winter – stipulates that asphalt cement chemically (irreversibly) aged in the rolling thin film oven and pressure ageing vessel be tested after minimal cold conditioning. Creep stiffness and creep rate (m-value) are determined with specimens rapidly cooled to 10°C above the pavement design temperature and then conditioned for only an hour prior to testing. As a result, materials are often tested in a non-equilibrium state and pavements end up under-designed for thermal cracking; adjacent sections can show from best-case to worst-case performance. Several Ontario user agencies have recently implemented a specification to effectively limit cracking due to reversible ageing: “determination of performance grade of physically aged asphalt binder using the extended bending beam rheometer (EBBR) method” (Ministry of Transportation of Ontario designation LS-308 and recently adopted by AASHTO under designation TP 122-16). This empirical protocol tests beams after 72 h of cold conditioning to determine a low-temperature grade as well as a grade loss from the 1 h results specified in AASHTO M320. Grade losses are sensitive to the presence of deleterious additives (waxes, air blown residues, recycled engine oil bottoms). Furthermore, by testing recovered material from paving mixtures, the protocol also provides a secure way to account for the presence of reclaimed asphalt pavement, and to monitor for overheating during production. The extended BBR method has several limitations: (1) it requires a relatively large quantity of 150 g of aged material; (2) it takes a relatively long 72 h to complete and (3) it quenches the binder from room temperature to two cold temperatures, namely 10°C and 20°C above the pavement design limit (Td+10 and Td+20), and therefore, because of its empirical nature, it is unclear if the results obtained are relevant for other thermal histories. Since these drawbacks have slowed implementation, current research is focused on the following improvements: (1) modelling the ageing/hardening processes within the Ozawa theoretical framework; (2) reducing sample requirement to less than 12 g; (3) shortening testing time to less than 24 h; (4) conditioning at more temperatures between ambient and the pavement design limit and (5) automating the procedure. Modelling efforts are based on an analysis of non-isothermal phase transformation kinetics. This paper presents results obtained from differential scanning calorimetry and dynamic mechanical analysis three-point bending tests on a number of Ontario asphalt cements under varying cooling rates. The application of the Ozawa theory provides an improved understanding of how thermal history and variable ageing tendencies can explain vast performance differences between pavement sections of identical AASHTO M320 grades. It is suggested that by adding an upper limit on the Ozawa exponent to the low-temperature asphalt cement specification, in order to reduce the rate of reversible ageing, user agencies will be able to better control this type of cracking.