The Journal of the Korean Wood Science and Technology (JKWST) launched in 1973 as an official publication of the Korean Society of Wood Science and Technology has been served as a core of knowledges on wood science and technology.
25 July 2019 in Journal of the Korean Wood Science and Technology
The Journal of the Korean Wood Science and Technology (JKWST) launched in 1973 as an official publication of the Korean Society of Wood Science and Technology has been served as a core of knowledges on wood science and technology.
21 June 2015 in Journal of the Indian Academy of Wood Science
Increasing industrial activity and human population have resulted in high consumption of fossil fuels. Therefore, the Indonesian government is currently promoting a decarbonization program to achieve carbon neutrality or net zero emission. To support this program, a renewable energy source based on biomass is being developed. However, information on potential sources of biomass as an energy provider for power plants is limited and has not been investigated comprehensively. Therefore, this study aims to explore and to investigate the potential of three species of local shrubs (Bungur/ Lagerstroemia speciosa , Latte/ Myrsine avenis , and Terasa/ Mischocarpus sundaicus ) as an alternative energy source for co-firing purposes in power plants. These materials were processed into a bio-pellet and were evaluated based on the Indonesian National Standard 8951-2020. The results show torrefaction increases bio-pellet density and reduces moisture content, making them drier and easier to burn. Ash content slightly increases but remains within SNI 8951-2020 limits. The calorific value of bio-pellets increases by 18–20% after torrefaction, meeting SNI standards. Torrefaction before and after pelletizing results in more stable dimensions and lower springback. M. avenis bio-pellets excel in moisture, ash, volatile matter, fixed carbon, and calorific value, while L. speciosa ranks second and M. sundaicus excels only in density. Torrefaction at 250°C yields the highest calorific value, but 150°C is the most energy-efficient. A 30-min torrefaction duration is also most efficient, though 45 and 60 min produce good characteristics. M. avenis bio-pellets are superior, and torrefaction after pelletizing at 150°C for 30 min is the most efficient production method. Moreover, this research underscores the need to adjust measurement conditions to prevent overheating, which can distort results by falsely indicating higher volatile matter content and causing unnecessary biomass combustion.
One process to improve wood quality is densification or wood surface compression. Our study analyzed the changes in some basic properties of pine wood, including its anatomical structure, density, modulus of elasticity (MOE), and dimensions of cellulose crystallites, after densification following soaking pretreatment in CH3COOH and H2O2 at a concentration of 20%. Samples were sawn in radial and tangential directions for analysis of the wood. The results showed a change in the shape of tracheid cells from hexagonal to oval, as well as damage to the ray cell constituents on the tangential surface. The thickness decrease of the samples was in accordance with the target, which meant that spring-back was short. In general, the tangential boards had a higher density than the radial boards, with a lower MOE and crystallite dimensions. Our findings showed that the densified tangential board was stronger than the radial board.
20 August 2026 in International Wood Products Journal
Recent advancements in renewable energy sources have highlighted the development of bio-pellets derived from lignocellulosic materials owing to the renewable nature of the biomass utilized. Beyond the parameters established by the Indonesian National Standard, it is crucial to understand the changes in mass and thermal properties. This understanding is essential for analyzing the thermal stability and degradation of bio-pellets. The bio-pellets were synthesized from various compositions of Gamal ( Gliricidia sepium ), Lamtoro ( Leucaena leucocephala ), and Coffee ( Coffea canephora ) husk in ratios (Gamal/G: Lamtoro/L: Coffee husk/C) of 0:1:1, 1:0:1, 1:1:0, 1:1:2, 2:1:1, and 1:2:1 at temperatures of 180 °C and 225 °C, with processing durations of 3 and 5 min. These diverse bio-pellet compositions were evaluated for their proximate values, mineral contents, and calorific values, according to the Indonesian National Standard (SNI 8675-2018). The composition with the highest calorific value (1:1:2) was subjected to thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results showed that the bio-pellets met the SNI 8675-2018 requirements for density (0.90–1.12 g/cm 3 ), moisture content (4.24–7.51%), volatile matter (68.13–76.81%), fixed carbon content (20.50–25.85%), calorific value (17.8–20.8 MJ/kg), Na 2 O content (0.014–0.046%), and K 2 O content (0.96–2.52%). However, the ash content (2.54–6.13%) and sulfur content (0.05–0.13%) did not meet the standards in some samples, while none of the samples met the requirements for Cl content (0.33–0.54%). TGA and DSC analyses revealed variations in mass and thermal properties owing to differences in temperature and processing time, which affected the thermal stability of the bio-pellets. These findings provide insights into the temperature and decomposition rate of bio-pellets, which can inform the future development of lignocellulose-based bio-pellets as renewable energy sources.