In this article, we review recent advances in the technology of writing fiber Bragg gratings (FBGs) in selected cores of multicore fibers (MCFs) by using femtosecond laser pulses. The writing technology of such a key element as the FBG opens up wide opportunities for the creation of next generation fiber lasers and sensors based on MCFs. The advantages of the technology are shown by using the examples of 3D shape sensors, acoustic emission sensors with spatially multiplexed channels, as well as multicore fiber Raman lasers.

A compact random fiber laser based on a short artificial Rayleigh reflector and heavily-doped Er fibers (custom-made and commercial as a reference) has been proposed, characterized and optimized in terms of efficiency, linewidth and noise level. A 10-cm artificial Rayleigh reflector with mean scattering level of +41.3 dB/mm relative to the natural Rayleigh scattering of the host fiber and low insertion loss level (∼0.05 dB/cm at 1535 nm) was fabricated using a femtosecond direct writing technique. Its implementation as a distributed output mirror in a half-open cavity of a 980-nm diode pumped Er-doped fiber laser results in random lasing at 1535 nm in single- and few-mode regimes with power up to 100 mW, slope efficiency up to 16.5%, and signal-to-noise ratio up to 60 dB. A single-frequency regime with ∼10 KHz linewidth was observed at output power up to 2.5 mW. Tunability potential of such random lasers is also demonstrated.

Random fiber lasers operating via the Rayleigh scattering (RS) feedback attract now a great deal of attention as they generate a high-quality unidirectional laser beam with the efficiency and performance comparable and even exceeding those of fiber lasers with conventional cavities. Similar to other random lasers, both amplification and random scattering are distributed here along the laser medium being usually represented by a kilometers-long passive fiber with Raman gain. However, it is hardly possible to utilize normal gain in conventional active fibers as they are usually short and RS is negligible. Here we report on the first demonstration of the RS-based random lasing in an active fiber. This became possible due to the implementation of a new Bi-doped fiber with an increased amplification length and RS coefficient. The realized Bi-fiber random laser generates in a specific spectral region (1.42 μm) exhibiting unique features, in particular, a much narrower linewidth than that in conventional cavity of the same length, in agreement with the developed theory. Lasers of this type have a great potential for applications as Bi-doped fibers with different host compositions enable laser operation in an extremely broad range of wavelengths, 1.15–1.78 μm.

Specially designed composite heavily Er³⁺-doped fiber in combination with unique point-by-point inscription technology by femtosecond pulses at 1,026 nm enables formation of distributed-feedback (DFB) laser with ultra-short cavity length of 5.3 mm whose parameters are comparable and even better than those for conventional Er³⁺-doped fiber DFB lasers having much longer cavity. The composite fiber was fabricated by melting rare-earth doped phosphate glass in silica tube. The ultra-short DFB laser generates single-polarization single-frequency radiation at 1,550 nm with narrow linewidth (3.5 kHz) and 0.5 mW output power at 600 mW 980-nm pumping. The same fiber with conventional CW UV (244 nm) inscription technology using phase mask enables fabrication of 40-mm long DFB laser with > 18 mW output power at 3.3% pump conversion, which is a record efficiency for Er³⁺-doped fiber DFB lasers. The developed technologies form an advanced platform for Er³⁺-doped fiber DFB lasers operating around 1.55 µm with excellent output characteristics and unique practical features, in particular, the ultra-short DFB lasers are attractive for sensing applications.