A highly specific and sensitive linear humidity sensor has been fabricated using a dispersion of 2D hexagonal boron nitride (hBN) flakes in polyethylene oxide (PEO). Bulk hBN powder was exfoliated via liquid-assisted mechanical exfoliation to achieve few-layered 2D nano-flakes with thicknesses in the range of 3–4 nm. PEO was used as the polymer matrix to disperse the hBN flakes evenly throughout the suspension. An interdigitated transducer (IDT) electrode pair fabricated via reverse off-set printing using silver nanoparticles ink (AgNPs) on a piezoelectric LiNbO3 substrate serves as the transducing portion of the sensor. Electrohydrodynamic atomization was used to spray a uniform thin film of the active composite material onto the sensor electrodes. All the fabrication methods used are compatible with printed electronics approaches and are suitable for mass production. The sensors show excellent stability for up to 40 days of testing. The sensitivity of the near-linear sensors was ∼24 kΩ/%RH, which is better than most of the previously reported studies. The sensors showed response and recovery times of 2.6 s and 2.8 s, respectively. The selectivity of the sensors was tested by exposing the sensors to O2, N2, and CH4 gases in addition to humidity and the results showed no effect of the other gases on the sensors output. The fabricated sensors based on the 2D hBN/polymer composite can be employed in high-end target specific applications requiring accurate and high performance humidity sensors.
1 February 2020 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
Two-dimensional graphene oxide (GO)-based lamellar membranes have been widely developed for desalination, water purification, gas separation, and pervaporation. However, membranes with a well-organized multilayer structure and controlled pore size remain a challenge. Herein, an easy and efficient method is used to fabricate MoO2@GO and WO3@GO nanocomposite membranes with controlled structure and interlayer spacing. Such membranes show good separation for salt and heavy metal ions due to the intensive stacking interaction and electrostatic attraction. The as-prepared composite membranes showed high rejection rates (˃70%) toward small metal ions such as sodium (Na+) and magnesium (Mg2+) ions. In addition, both membranes also showed high rejection rates ˃99% for nickel (Ni2+) and lead (Pb2+) ions with good water permeability of 275 ± 10 L m−2 h−1 bar−1. We believe that our fabricated membranes will have a bright future in next generation desalination and water purification membranes.
1 November 2018 in Materials Science and Engineering: C
Background: Plants have been considered a vital source of modern pharmaceutics since the paleolithic age. Contemporary chemotherapeutic drugs for cancer therapy are chemical entities sourced from plants. However, synthetic drugs or their derivatives come with severe to moderate side effects for human health. Hence, the quest to explore and discover plant-based novel anticancer drugs is ongoing. Anticancer activities are the primary method to estimate the potential and efficacy of an extract or compound for drug discovery. However, traditional in vitro anticancer activity assays often show poor efficacy due to the lack of in-vivo-like cellular environment. In comparison, the animal-based in vivo assays lack human genetic makeup and have ethical concerns. Aim: This study aimed to overcome the limitations of traditional cell-culture-based anticancer assays and find the most suitable assay for anticancer activity of plant extracts. We first reported utilizing a liver tumor microphysiological system in the anticancer effect assessment of plant extracts. Methodology: Methanolic extracts of Acer cappadocicum Gled were used to assess anticancer activity against liver tumor microphysiological system (MPS), and cell viability, liver function tests, and antioxidant enzyme activities were performed. Additionally, an embedded transepithelial electrical resistance sensor was utilized for the real-time monitoring of the liver tumor MPS. The results were also compared with the traditional cell culture model. Results: The study demonstrated the superiority of the TEER sensor-based liver tumor MPS by its better anticancer activity based on cell viability and biomarker analysis compared to the traditional in vitro cell culture model. The anticancer effects of the plant extracts were successfully observed in real time, and methanolic extracts of Acer cappadocicum Gled increased the alanine transaminase and aspartate aminotransferase secretion, which may reveal the different mechanisms of these extracts and suggest a clue for the future molecular study of the anticancer pathways. Conclusion: Our results show that the liver tumor microphysiological system could be a better platform for plant-based anticancer activity assessment than traditional cell culture models.