The mechanical properties of hybrid framework materials, including both nanoporous metal–organic frameworks (MOFs) and dense inorganic–organic frameworks, are discussed in this critical review. Although there are relatively few studies of this kind in the literature, major recent advances in this area are beginning to shed light on the fundamental structure–mechanical property relationships. Indeed research into the mechanical behavior of this important new class of solid-state materials is central to the design and optimal performance of a multitude of technological applications envisaged. In this review, we examine the elasticity of hybrid frameworks by considering their Young's modulus, Poisson's ratio, bulk modulus and shear modulus. This is followed by discussions of their hardness, plasticity, yield strength and fracture behavior. Our focus is on both experimental and computational approaches. Experimental work on single crystals and amorphized monoliths involved primarily the application of nanoindentation and atomic force microscopy to determine the elastic moduli and hardness properties. The compressibility and bulk moduli of single crystals and polycrystalline powders were studied by high-pressure X-ray crystallography in the diamond anvil cell, while in one instance spectroscopic ellipsometry has also been used to estimate the elastic moduli of MOF nanoparticles and deposited films. Theoretical studies, on the other hand, encompassed the application of first principles density-functional calculations and finite-temperature molecular dynamics simulations. Finally, by virtue of the diverse mechanical properties achievable in hybrid framework materials, we propose that a new domain be established in the materials selection map to define this emerging class of materials (137 references).

As synthesised ZIF-8 nanoparticles (size ∼ 60 nm and specific surface area ∼ 1300–1600 m² g⁻¹) were directly incorporated into a model polymer matrix (Matrimid® 5218) by solution mixing. This produces flexible transparent membranes with excellent dispersion of nanoparticles (up to loadings of 30 wt%) with good adhesion within the polymer matrix, as confirmed by scanning electron microscopy, dynamic mechanical thermal analysis and gas sorption studies. Pure gas (H₂, CO₂, O₂, N₂ and CH₄) permeation tests showed enhanced permeability of the mixed matrix membrane with negligible losses in selectivity. Positron annihilation lifetime spectroscopy (PALS) indicated that an increase in the free volume of the polymer with ZIF-8 loading together with the free diffusion of gas through the cages of ZIF-8 contributed to an increase in gas permeability of the composite membrane. The gas transport properties of the composite membranes were well predicted by a Maxwell model whilst the processing strategy reported can be extended to fabricate other polymer nanocomposite membranes intended for a wide range of emerging energy applications.

The mechanical properties of seven zeolitic imidazolate frameworks (ZIFs) based on five unique network topologies have been systematically characterized by single-crystal nanoindentation studies. We demonstrate that the elastic properties of ZIF crystal structures are strongly correlated to the framework density and the underlying porosity. For the systems considered here, the elastic modulus was found to range from 3 to 10 GPa, whereas the hardness property lies between 300 MPa and 1.1 GPa. Notably, these properties are superior to those of other metal–organic frameworks (MOFs), such as MOF-5. In substituted imidazolate frameworks, our results show that their mechanical properties are mainly governed by the rigidity and bulkiness of the substituted organic linkages. The framework topology and the intricate pore morphology can also influence the degree of mechanical anisotropy. Our findings present the previously undescribed structure-mechanical property relationships pertaining to hybrid open frameworks that are important for the design and application of new MOF materials.

Hybrid glasses connect the emerging field of metal-organic frameworks (MOFs) with the glass formation, amorphization and melting processes of these chemically versatile systems. Though inorganic zeolites collapse around the glass transition and melt at higher temperatures, the relationship between amorphization and melting has so far not been investigated. Here we show how heating MOFs of zeolitic topology first results in a low density ‘perfect’ glass, similar to those formed in ice, silicon and disaccharides. This order–order transition leads to a super-strong liquid of low fragility that dynamically controls collapse, before a subsequent order–disorder transition, which creates a more fragile high-density liquid. After crystallization to a dense phase, which can be remelted, subsequent quenching results in a bulk glass, virtually identical to the high-density phase. We provide evidence that the wide-ranging melting temperatures of zeolitic MOFs are related to their network topologies and opens up the possibility of ‘melt-casting’ MOF glasses.