Due to the distortion of air gap magnetic field and the inherent non-linear characteristics of the inverter, the stator current of permanent magnet synchronous motor (PMSM) contains a large number of high order harmonic components, which distorts the current waveform and generates torque ripple, limiting the application of the PMSM in high speed and precision situations. To solve this problem, a harmonic current suppression method is proposed based on synchronous rotating coordinate transformation theory and adaptive filtering algorithm. The PMSM harmonic mathematical model is established and the coordinate transformation method is used to extract the 5th and 7th harmonic currents. On the basis of the original double closed-loop control system, the harmonic current loop is added, and the harmonic components are suppressed by injecting harmonic voltages. In order to improve the filtering effect and reduce the harmonic content, an adaptive filter is designed to replace the conventional low pass filter in the process of harmonic current extraction. According to the results of coordinate transformation, the adaptive filter continuously adjusts the parameters online through the least mean square (LMS) algorithm to extract the harmonic current. The simulation and experimental results proved the correctness and effectiveness of the proposed method.
29 September 2019 in Electric Power Components and Systems
In order to improve the robustness, disturbance rejection and dynamic response performance of permanent magnet synchronous motor (PMSM) speed servo system, a novel sliding mode control (NSMC) strategy is adopted to replace the traditional proportion integral (PI) regulator in the design of speed controller. The mathematical model of PMSM is analyzed and a sliding mode controller based on a novel reaching technique is proposed. The integral of speed error is introduced into sliding mode surface to avoid the requirements of acceleration signal and reduced the steady-state error of the system. Meanwhile, a variable speed reaching method is imported to make the approaching speed correlate with the change of system state |s|, so as to improve the dynamic quality. In addition, the sigmoid function is used to replace the sign function in the conventional SMC, which further reduces chattering phenomena. Simulation and experimental results show that the proposed NSMC method based on the new reaching technique can realize precise speed control. Compared with the conventional PI and SMC control, this method not only achieves a fastest and best response speed, but also has a strongest robustness of resisting the external disturbance.
In order to improve the dynamic response and disturbance rejection performance of electric machines, a deadbeat predictive speed control (DPSC) scheme for a permanent magnet synchronous motor (PMSM) is proposed. To begin with, a DPSC controller was proposed with the purpose of achieving precise control for the next control cycle, and the control parameters were determined based on the optimal parameter design method. For better application, performance comparisons were made with a conventional PI control, and the mismatch effects of inertia and torque were analyzed. In order to improve the disturbance rejection performance of the system, an extended sliding mode observer (ESMO) was constructed to compensate for disturbances. Experimental verification with a conventional PI control indicates that the proposed DPSC control can reduce the speed response time from 0.675 s to 0.650 s. When the electric machine operates stably and is applied to a torque disturbance of 0.4 Nm, the speed fluctuation and settling time can be reduced from 9 rpm and 1.7 s to 6 rpm and 0.5 s, respectively. This proposed method effectively enhances the speed control performance of PMSM and can be applied to high-performance electric machine applications.