Solid waste sorting facilities are constructed and operated to properly manage solid waste for both material and energy recovery. This paper investigates the possible technical and economic performance of the Al-Karak solid waste sorting plant in order to achieve financial sustainability and increase the profits that return on the plant to cover its operating costs. A standard procedure was followed to quantify and characterize the input materials of commercial solid waste by determining the recyclable materials in the sorting products. Thus, possible different equipment and material flows through the plant were proposed. An economic model was used in order to know the feasibility of the proposed options of the plant according to three economic factors, which are net present worth (NPW), return on investment (ROI), and payback period values. The results inferred that the characterization of the input materials contains a high portion of recyclable materials of paper, cardboard, plastic, and metals, which accounted for 63%. In this case, the mass of rejected waste to be landfilled was 9%. Results for the proposed options showed that the economic analysis is feasible when working loads on three and two shifts with ROI values of 4.4 and 3.5 with a payback period of the initial cost in 2 and 3 years, respectively. Working load on one shift was not feasible, which resulted in an ROI value of less than 2 and a payback period larger than 5 years. This paper recommended operating the sorting plant at a higher input feed with a working load on three shifts daily to ensure a maximum profit and to reduce the amount of commercial solid waste prior to landfilling through the concept of sorting and recycling.
This study evaluated the process of in-site sorting of the generated solid waste (SW) in some educational institutions in Ma'an city, Jordan. The study included eight schools and one University. The students and employees of seven schools, as well as the students and employees of the...
1 December 2023 in Civil and Environmental Engineering
This research aims to look into a sustainable technique for the treatment, reuse and disposal of domestic sewage sludge (DSS). The purpose of the study was to examine the operating factors that influence the calorific value of the produced biochar from the pyrolysis of DSS. Based on the analysis of the full factorial design, the impacts of the pyrolysis conditions, specifically: temperature, heating rate, and isothermal time on the calorific value of biochar were evaluated. When the pyrolysis temperature was raised from 300 to 500 o C, the calorific value of biochar was decreased by 34%. A 14% decrease in the calorific content of the biochar was also noticed when the heating rate was increased from 5 to 35 o C/min. When the isothermal time was increased from 45 to 120 minutes, the calorific value of the biochar remained essentially unchanged. No interaction effects among process variables were found using the factorial design methodology. A first-order regression model was developed to predict the calorific value of biochar using the magnitude of the effects of the process factors and their interactions. The model predictions agreed very well with the obtained experimental results.
1 December 2025 in Ecological Chemistry and Engineering S
This study evaluates different options for the valorisation of olive cake waste in Jordan, focusing on direct combustion, gasification, and composting. Physical/chemical, biological/ecological, sociological/cultural, and economic/operational aspects of each option are assessed using the Rapid Impact Assessment Matrix (RIAM) procedure. The findings indicate that composting of olive cake emerges as the most favourable option, offering positive impacts on soil quality, minimal environmental and social risks, and economic benefits through job creation and value-added products. Gasification and direct combustion also show potential but may require further consideration of local context and stakeholder preferences. Overall, the study provides valuable insights for decision-makers in selecting the most suitable olive cake valorisation option in Jordan.
1 October 2024 in Journal of Ecological Engineering
Date pomace (DP), the primary source of the solid wastes generated from date processing industry, characterized by high sugar concentration and elevated moisture content, it constitutes about 30% of the weight of the processed dates. In addition to the safe disposal, incorporating DP in the...