The authors present a quantum dot (QD) based single photon detector operating at a fiber optic telecommunication wavelength. The detector is based on an $\mathrm{Al}\mathrm{As}∕{\mathrm{In}}_{0.53}{\mathrm{Ga}}_{0.47}\mathrm{As}∕\mathrm{Al}\mathrm{As}$ double-barrier resonant tunneling diode containing a layer of self-assembled InAs QDs grown on an InP substrate. The device shows an internal efficiency of about 6.3% with a dark count rate of $1.58\times {10}^{-6}{\mathrm{ns}}^{-1}$ for $1310\mathrm{nm}$ photons.

For more than 50 years, research into III–V compound semiconductors has focused almost exclusively on materials grown on (001)-oriented substrates. In part, this is due to the relative ease with which III–Vs can be grown on (001) surfaces. However, in recent years, a number of key technologies have emerged that could be realized, or vastly improved, by the ability to also grow high-quality III–Vs on (111)- or (110)-oriented substrates These applications include: next-generation field-effect transistors, novel quantum dots, entangled photon emitters, spintronics, topological insulators, and transition metal dichalcogenides. The first purpose of this paper is to present a comprehensive review of the literature concerning growth by molecular beam epitaxy (MBE) of III–Vs on (111) and (110) substrates. The second is to describe our recent experimental findings on the growth, morphology, electrical, and optical properties of layers grown on non-(001) InP wafers. Taking InP(111)A, InP(111)B, and InP(110) substrates in turn, the authors systematically discuss growth of both In0.52Al0.48As and In0.53Ga0.47As on these surfaces. For each material system, the authors identify the main challenges for growth, and the key growth parameter–property relationships, trends, and interdependencies. The authors conclude with a section summarizing the MBE conditions needed to optimize the structural, optical and electrical properties of GaAs, InAlAs and InGaAs grown with (111) and (110) orientations. In most cases, the MBE growth parameters the authors recommend will enable the reader to grow high-quality material on these increasingly important non-(001) surfaces, paving the way for exciting technological advances.

Research into self-assembled semiconductor quantum dots (QDs) has helped advance numerous optoelectronic applications, ranging from solid-state lighting to photodetectors. By carefully controlling molecular beam epitaxy (MBE) growth parameters, we can readily tune QD light absorption and emission properties to access a broad portion of the electromagnetic spectrum. Although this field is now sufficiently mature that QDs are found in consumer electronics, research efforts continue to expand into new areas. By manipulating MBE growth conditions and exploring new combinations of materials, substrate orientations, and the sign of strain, a wealth of opportunities exist for synthesizing novel QD nanostructures with hitherto unavailable properties. As such, QDs are uniquely well positioned to make critical contributions to the development of future quantum technologies. In this tutorial, we summarize the history of self-assembled QDs, outline some examples of quantum optics applications based on QDs, discuss the science that explains the spontaneous formation of QDs, and provide recipes for successful QD growth by MBE for some of the most commonly used semiconductor materials systems. We hope that compiling this information in one place will be useful both for those new to QD self-assembly and for experienced researchers, ideally supporting the community’s efforts to continue pushing the boundaries of knowledge in this important field.

There exists a long-term need for foreign substrates on which to grow GaSb-based optoelectronic devices. We address this need by using interfacial misfit arrays to grow GaSb-based thermophotovoltaic cells directly on GaAs (001) substrates and demonstrate promising performance. We compare these cells to control devices grown on GaSb substrates to assess device properties and material quality. The room temperature dark current densities show similar characteristics for both cells on GaAs and on GaSb. Under solar simulation the cells on GaAs exhibit an open-circuit voltage of 0.121 V and a short-circuit current density of 15.5 mA/cm². In addition, the cells on GaAs substrates maintain 10% difference in spectral response to those of the control cells over a large range of wavelengths. While the cells on GaSb substrates in general offer better performance than the cells on GaAs substrates, the cost-savings and scalability offered by GaAs substrates could potentially outweigh the reduction in performance. By further optimizing GaSb buffer growth on GaAs substrates, Sb-based compound semiconductors grown on GaAs substrates with similar performance to devices grown directly on GaSb substrates could be realized.

Symmetric quantum dots (QDs) on (111)-oriented surfaces are promising candidates for generating polarization-entangled photons due to their low excitonic fine structure splitting (FSS). However, (111) QDs are difficult to grow. The conventional use of compressive strain to drive QD self-assembly fails to form 3D nanostructures on (111) surfaces. Instead, we demonstrate that (111) QDs self-assemble under tensile strain by growing GaAs QDs on an InP(111)A substrate. Tensile GaAs self-assembly produces a low density of QDs with a symmetric triangular morphology. Coherent, tensile QDs are observed without dislocations, and the QDs luminescence at room temperature. Single QD measurements reveal low FSS with a median value of 7.6 μeV, due to the high symmetry of the (111) QDs. Tensile self-assembly thus offers a simple route to symmetric (111) QDs for entangled photon emitters.