Constrained by traditional fuel-saving technologies that have almost reached the limit of fuel-saving potential, the difficulty in changing urban congestion, and the low market penetration rate of new energy vehicles, in the short term, eco-driving seems to be an effective way to achieve energy-saving and emissions reduction in the transportation industry. This paper reviews the energy-saving theory and technology of eco-driving, eco-driving capability evaluation, and the practical application of eco-driving, and points out some limitations of previous studies. Specifically, the research on eco-driving theory mostly focuses on a single vehicle in a single scene, and there is a lack of eco-driving research for fleets or regions. In addition, the parameters used to evaluate eco-driving capabilities mainly focus on speed, acceleration, and fuel consumption, but external factors that are not related to the driver will affect these parameters, making the evaluation results unreasonable. Fortunately, vehicle big data and the Internet of Vehicles (V2I) provides an information basis for solving regional eco-driving, and it also provides a data basis for the study of data-driven methods for the fair evaluation of eco-driving. In general, the development of new technologies provides new ideas for solving some problems in the field of eco-driving.

In the era of big data, using big data to realize the online estimation of battery SOH has become possible. Traditional solutions based on theoretical models cannot take into account driving behavior and complicated environmental factors. In this paper, an approximate SOH degradation model based on real operating data and environmental temperature data of electric vehicles (EVs) collected with a big data platform is proposed. Firstly, the health indicators are extracted from the historical operating data, and the equivalent capacity at 25 °C is obtained based on the capacity–temperature empirical formula and the capacity offset. Then, the attenuation rate during each charging and discharging process is calculated by combining the operating data and the environmental temperature. Finally, the long short-term memory (LSTM) neural network is used to learn the degradation trend of the battery and predict the future decline trend. The test results show that the proposed method has better performance.

The estimation of energy consumption under real-world driving conditions is a prerequisite for optimizing bus scheduling and meeting the requirements of route operation, thereby promoting the large-scale application of battery electric buses. However, the limitation of data accuracy and the uncertainty of many factors, such as weather conditions, traffic conditions, and driving styles, etc. make accurate energy consumption estimation complicated. In response to these challenges, a new method for estimating the energy consumption of battery electric buses (BEBs) is proposed in this research. This method estimates the speed profiles of different driving styles and the energy consumption extremes using real-world driving data. First, this research provides the constraints on speed formed by environmental factors including weather conditions, route characteristics, and traffic characteristics. On this basis, there are two levels of estimation for energy consumption. The first level classifies different driving styles and constructs the corresponding speed profiles with the time interval (10 s), the same as real-world driving data. The second level further constructs the speed profiles with the time interval of 1 s by filling in the first-level speed profiles and estimating the energy consumption extremes. Finally, the estimated maximum and minimum value of energy consumption were compared with the true value and the results showed that the real energy consumption did not exceed the extremes we estimated, which proves the method we proposed is reasonable and useful. Therefore, this research can provide a theoretical foundation for the deployment of battery electric buses.

To achieve the real-time application of a dynamic programming (DP) control strategy, we propose a predictive energy management strategy (PEMS) based on full-factor trip information, including vehicle speed, slip ratio and slope. Firstly, the prediction model of the full-factor trip information is proposed, which provides an information basis for global optimization energy management. To improve the prediction’s accuracy, the vehicle speed is predicted based on the state transition probability matrix generated in the same driving scene. The characteristic parameters are extracted by a feature selection method taken as the basis for the driving condition’s identification. Similar to speed prediction, regarding the uncertain route at an intersection, the slope prediction is modelled as a Markov model. On the basis of the predicted speed and the identified maximum adhesion coefficient, the slip ratio is predicted based on a neural network. Then, a predictive energy management strategy is developed based on the predictive full-factor trip information. According to the statistical rules of DP results under multiple standard driving cycles, the reference SOC trajectory is generated to ensure global sub-optimality, which determines the feasible state domain at each prediction horizon. Simulations are performed under different types of driving conditions (Urban Dynamometer Driving Schedule, UDDS and World Light Vehicle Test Cycle, WLTC) to verify the effectiveness of the proposed strategy.