A simple microplasma method was used to synthesize cuprous oxide (Cu2O) nanoparticles in NaCl–NaOH–NaNO3 electrolytic system. Microplasma was successfully used as the cathode and copper plate was used as the anode. The Cu2O products are characterized by X–ray powder diffraction (XRD), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The results show that the morphology of Cu2O nanocrystals obtained by this technology is mainly dependent on the electrolytic media, stirring, current density and reaction temperature. The uniform and monodisperse sphere Cu2O nanoparticles with the size about 400 ~ 600 nm can be easily obtained in H2O–ethylene glycol mix–solvent (volume ratio 1:1) and appropriate current density with stirring at room temperature. In addition, the possible mechanism has been reported in the article. And the average energy consumed in producing 1 g Cu2O nanoparticles is 180 kJ. For the flexibility and effectiveness of this microplasma technology, it will have broad application prospects in the realm of nanoscience, energy and environment.
1 October 2015 in International Journal of Hydrogen Energy
Gliding arc discharge has been investigated in recent years as an innovative physicochemical technique for contaminated water treatment at atmospheric pressure and ambient temperature. In this study we tested a gas–liquid gliding arc discharge reactor, the bacterial suspension of which was treated circularly. When the bacterial suspension was passed through the electrodes and circulated at defined flow rates, almost 100% of the bacteria were killed in less than 3.0 min. Experimental results showed that it is possible to achieve an abatement of 7.0 decimal logarithm units within only 30 s. Circulation flow rates and types of feeding gas caused a certain impact on bacteria inactivation, but the influences are not obvious. So, under the promise of sterilization effect, industrial applications can select their appropriate operating conditions. All inactivation curves presented the same three-phase profile showing an apparent sterilization effect. Analysis of the scanning electron microscope images of bacterial cells supports the speculation that the gas–liquid gliding arc discharge plasma is acting under various mechanisms driven essentially by oxidation and the effect of electric field. These results enhance the possibility of applying gas–liquid gliding arc discharge decontamination systems to disinfect bacterial-contaminated water. Furthermore, correlational research indicates the potential applications of this technology in rapid sterilization of medical devices, spacecraft and food.