The performance of a quality of service (QoS) control scheme in a multi-hop wireless body area network (WBAN) based on the IEEE Std. 802.15.6 is evaluated. In medical Internet of Things systems, WBANs are an important technology. In a previous study, an optimal quality of service control scheme that employs a multiplexing layer for priority scheduling and a decomposable error control coding scheme for WBANs were proposed. However, the two-hop extension supported by IEEE Std.802.15.6 has not been considered. Here, the two-hop extension is applied. Then, the packet error ratio, number of transmissions, and energy efficiency of our previously proposed system are compared to a standard scheme under several conditions. Also, novel evaluations based on communication distance are conducted. Numerical results demonstrate that our proposed scheme, in which coding rates change relative to channel conditions, outperforms standard schemes in many aspects. In addition, those systems show the best performance when the communication distance of the first hop equals that of the second hop. In addition, the above result is theoretically clarified.
This paper performs integrated performance evaluation, including preamble detection in the Smart Body Area Networks (SmartBAN) physical layer (PHY). The system specifications for a PHY and media access control layer (MAC) in SmartBAN, which is a standard for medical and health care advanced by the European Telecommunications Standards Institute (ETSI), were issued in April 2015. In the PHY, the packet structure has a two-octet preamble, which is used, e.g., for timing synchronization. However, it is considered that the current preamble structure is not appropriate for handling medical and healthcare data that are required to have high reliability because of the too simple structure. Therefore, we propose adding a start frame delimiter (SFD) to correctly detect the header position. Computer simulations indicate that preambles with an SFD consisting of an orthogonal maximal length sequence (M-sequence) perform better than SmartBAN and similar approaches, particularly when transmitting over the IEEE model CM3. In addition, the packet error ratio (PER) and energy efficiency are evaluated in an integrated manner while taking preamble detection into consideration. The numerical results from computer simulations indicated the best performance with respect to PER was achieved using a preamble with orthogonal M-sequences of 4 octets. However, for energy efficiency, better results were obtained using a preamble with orthogonal M-sequences of 2 octets. Additionally, the theoretical analysis found the optimum length of the PHY packet to achieve the maximum energy efficiency with PER less than 10−2.
This research provides a study on a smart body area network (SmartBAN) physical layer (PHY), as an of the Internet of medical things (IoMT) technology, for an advanced human monitoring system in industrial use. The SmartBAN provides a new PHY and a medium access control (MAC) layer, improving its performance and providing very low-latency emergency information transmission with low energy consumption compared with other wireless body area network (WBAN) standards. On the other hand, IoMT applications are expected to become more advanced with smarter wearable devices, such as augmented reality-based human monitoring and work support in a factory. Therefore, it is possible to develop more advanced human monitoring systems for industrial use by combining the SmartBAN with multimedia devices. However, the SmartBAN PHY is not designed to transmit multimedia information such as audio and video. To address this issue, multilevel phase shift keying (PSK) modulation is applied to the SmartBAN PHY, and the symbol rate is improved by setting the roll-off rate appropriately to realize the system. The numerical results show that a sufficient link budget, receiver sensitivity and fade margin were obtained even when those approaches were applied to the SmartBAN PHY. The results indicate that these techniques are required for high-quality audio or video transmission, as well as vital sign data transmission, in a SmartBAN.
1 January 1992 in IEEE Transactions on Vehicular Technology
We analyze the performance of slotted ALOHA systems with energy harvesting nodes and the retry limit by developing a node-centric two-dimensional Discrete-Time Markov Chain (DTMC) model. We take into account not only the number of energy packets consumed when a data packet is transmitted but also a general probability distribution of an energy packet arrival process. We assume that the capacities of data and energy buffer at a node are one packet and E packets, respectively. According to the concept of the equilibrium point analysis, we derive a fixed point equation with respect to the ratio of nodes transmitting a data packet. The accuracy of theoretical results obtained from the fixed point equation is verified by computer simulation. Numerical results under Poisson arriving process of energy packets indicate that throughput, the offered traffic and the discard probability demonstrate weak symmetric relationship between the data packet generation probability and the average number of arriving energy packets. However, the average transmission delay rapidly increases when the average number of arriving energy packets becomes small.
Wireless body area networks (WBANs) are attracting attention as an important technology for realizing the Internet of Medical Things (IoMT). In addition, ultra-wideband (UWB) is one of the wireless communication technologies suitable for the IoMT and WBANs. Our previous study investigated the feasibility of WBANs utilizing UWB under ideal and static wearable WBAN channel models. The present research applies a dynamic on-body UWB channel model to a WBAN as a more realistic channel model. The feasibility of a high-reliability UWB-WBAN is demonstrated by evaluating the physical layer performance. Numerical results reveal the maximum number of retransmissions needed to achieve the desired transmission failure ratio for each link type and the corresponding energy efficiency and average number of retransmissions. These findings contribute to the realization of a highly reliable IoMT utilizing UWB-WBANs in a practical environment.