A modified technique for the automated design of microwave low noise amplifiers (LNAs) based on genetic algorithm (GA) is proposed. In contrast to previous GA-based approaches, it allows the synthesis of MMIC and PCB-based amplifier schematics with both lumped and distributed elements. During the synthesis, models of real passive elements in the form of measured S-parameter data sets can be used, this makes possible to directly account for element losses and parasitics. As an example, a double-stage 1-2 GHz LNA based on PCB and SMD components has been automatically synthesized, fabricated and measured. It is shown that the automated design can lead to practical circuits with performances close to commercial amplifiers.
The design and measurement of 0.1 - 4.5 GHz 5-bit MMIC digital step attenuator (DSA) are presented. The MMIC DSA is fabricated with 0.25 um SiGe BiCMOS process and includes integrated driver providing serial/parallel control. The main features of MMIC DSA are as follows: wideband performances (it covers L-, S- and partially C-band); a good input and output return losses (less than 12 dB and 14 dB, respectively); small phase variation (RMS phase error less than 5.3°); integrated driver; small size (1.4×0.6 mm 2 ); low power consumption Performances of MMIC DSA designed are compared with its commercial counterparts.
Investigations have shown that in the local approximation (for sizes L < 100 μm), AlGaN/GaN high electron mobility transistor (HEMT) structures satisfy to all properties of chaotic systems and can be described in the language of fractal geometry of fractional dimensions. For such objects, values of their electrophysical characteristics depend on the linear sizes of the examined regions, which explain the presence of the so-called size effects—dependences of the electrophysical and instrumental characteristics on the linear sizes of the active elements of semiconductor devices. In the present work, a relationship has been established for the linear model parameters of the equivalent circuit elements of internal transistors with fractal geometry of the heteroepitaxial structure manifested through a dependence of its relative electrophysical characteristics on the linear sizes of the examined surface areas. For the HEMTs, this implies dependences of their relative static (A/mm, mA/V/mm, Ω/mm, etc.) and microwave characteristics (W/mm) on the width d of the sink-source channel and on the number of sections n that leads to a nonlinear dependence of the retrieved parameter values of equivalent circuit elements of linear internal transistor models on n and d. Thus, it has been demonstrated that the size effects in semiconductors determined by the fractal geometry must be taken into account when investigating the properties of semiconductor objects on the levels less than the local approximation limit and designing and manufacturing field effect transistors. In general, the suggested approach allows a complex of problems to be solved on designing, optimizing, and retrieving the parameters of equivalent circuits of linear and nonlinear models of not only field effect transistors but also any arbitrary semiconductor devices with nonlinear instrumental characteristics.
A new approach to building of a spiral inductor scalable model is proposed. In this approach metal layer conductance was determined using S-parameters measurement results. The scalable equivalent circuit of spiral inductor was obtained automatically by means of developed techniques for equivalent circuit extraction and optimal polynomial degree algorithm for approximation. Proposed scalable model was found to have a sufficient agreement with carried out measurement.
1 February 2019 in AEU - International Journal of Electronics and Communications