The core advantage of metalenses over traditional bulky lenses lies in their thin volume and lightweight. Nevertheless, as the application scenarios of metalenses extend to the macro-scale optical imaging field, a contradiction arises between the increasing demand for large-aperture metalenses and the synchronous rise in design and processing costs. In response to the application requirements of metalens with diameter reaching the order of 10⁴λ or even 10⁵λ, this paper proposes a novel design method for fixed-height concentric-ring metalenses, wherein, under the constraints of the processing technology, a subwavelength 2D building unit library is constructed based on different topological structures, and the overall cross-section of the metalens is assembled. Compared to global structural optimization, this approach reduces computational resources and time consumption by several orders of magnitude while maintaining nearly identical focusing efficiency. As a result, a concentric-ring metalens with a designed wavelength of 632.8 nm and a diameter of 46.8 mm was developed, and a quasi-telecentric telescope system composed of aperture stop and metalens was constructed, achieving high-resolution detection within a 20° field of view. In the subsequent experiments, the unique weak polarization dependence and narrowband adaptability of the meta-camera are quantitatively analyzed and tested, and excellent imaging results were finally obtained. Our work not only ensures the narrowband optical performance but also promotes the simplicity and light weight of the metalens based telescopic system, which further advances the deep application of large-diameter metalenses in the field of astronomical observation.

Metalenses can achieve diffraction-limited focusing via localized phase modification of the incoming light beam. However, the current metalenses face to the restrictions on simultaneously achieving large diameter, large numerical aperture, broad working bandwidth and the structure manufacturability. Herein, we present a kind of metalenses composed of concentric nanorings that can address these restrictions using topology optimization approach. Compared to existing inverse design approaches, the computational cost of our optimization method is greatly reduced for large-size metalenses. With its design flexibility, the achieved metalens can work in the whole visible range with millimeter size and a numerical aperture of 0.8 without involving high-aspect ratio structures and large refractive index materials. Electron-beam resist PMMA with a low refractive index is directly used as the material of the metalens, enabling a much more simplified manufacturing process. Experimental results show that the imaging performance of the fabricated metalens has a resolution better than 600 nm corresponding to the measured FWHM of 745 nm.

Metalens, composed of arrays of nano-posts, is an ultrathin planar optical element used for constructing compact optical systems which can achieve high-performance optical imaging by wavefront modulating. However, the existing achromatic metalenses for circular polarization possess the problem of low focal efficiency, which is caused by the low polarization conversion efficiencies of the nano-posts. This problem hinders the practical application of the metalens. Topology optimization is an optimization-based design method that can effectively extend the degree of design freedom, allowing the phases and polarization conversion efficiencies of the nano-posts to be taken into account simultaneously in the optimization procedures. Therefore, it is used to find geometrical configurations of the nano-posts with suitable phase dispersions and maximized polarization conversion efficiencies. An achromatic metalens has a diameter of 40 μm. The average focal efficiency of this metalens is 53% in the spectrum of 531 nm to 780 nm by simulation, which is higher than the previously reported achromatic metalenses with average efficiencies of 20~36%. The result shows that the introduced method can effectively improve the focal efficiency of the broadband achromatic metalens.

To address the challenges posed by computational resource consumption and data volume in the development of large-aperture metalenses, a design method for concentric-ring metalens based on two-dimensional unit splicing is proposed in this paper. In the method, the unit structure library is constructed through global traversal under the machining process constraints. The phase matching is performed for two polarization states with specific weights and the design of binary-height, concentric-ring structures with arbitrary polarization sensitivity is realized, whose focusing efficiency (the encircled power within 3×FWHM of the focal spot divided by the near-field outgoing power) is up to 90%. Based on this method, a polarization-insensitive metalens with a design wavelength of 10µm, diameter of 2 cm, and numerical aperture of 0.447 is obtained. The method combines the advantages of lower computation requirements for a building block array of a metalens and lower structure data for a concentric-ring metalens. Consequently, it becomes possible to reduce calculation and processing costs by several orders of magnitude during the development process of metalenses with diameters ranging from 10³ to 10⁵ wavelengths. The resulting focusing efficiency can approach the upper limit achievable through global structural optimization and significantly surpass that of binary-height Fresnel lenses.

Achromatic metalenses face stringent aperture and numerical aperture (NA) constraints, which have become a key bottleneck in metasurface imaging. To this end, a novel achromatic imaging method was first proposed, utilizing the unique wideband consistency of diffracted Bessel spots combined with non-blind image restoration techniques. To address the off-axis aberration issue, off-axis achromatic meta-axicons with eccentric conical phases were further designed to convert oblique plane waves into wideband uniform off-axis Bessel beams. Ultimately, a single metasurface integrating 9 meta-axicons with different design field angles was developed, and a meta-camera was constructed accordingly. After image restoration, the meta-camera achieves achromatic imaging within a 10° stitched field of view (FOV), and an angular resolution close to that of near-diffraction-limit lens with the same aperture throughout the entire FOV. The core idea of achieving achromatic imaging based on natural dispersion laws in this study enables the wideband minimalist optical system based on metasurface to completely circumvent the aperture limitation, providing a highly valuable solution for large-aperture meta-camera design that can simultaneously accommodate wideband and off-axis FOV.

A simple 1D blazed metagrating is proposed. The metagrating consists of SiO₂ film sandwiched by Ag substrate and Ag nanostrips, which can achieve high-efficiency −1st-order diffraction in the range of 550 nm to 700 nm, and the peak efficiency is nearly 98%. The SiO₂ dielectric layer in previous designs is used chiefly as a waveguide layer to support a guided mode. In comparison, it is introduced here to suppress the unwanted diffraction order (zero-order), which helps achieve high-efficiency diffraction at a high diffraction order. For analysis, the metagrating is disassembled into two parts, including a flat plate and a grating. By analysing the far-field radiation pattern of scattered waves and the reflection phase of a specific mode for these two parts, we conclude that the cause of high-efficiency blazing draws support from suppressing zero-order based on destructive interference. This work provides an intuitive physical image for this type of metagrating and an idea to design high-efficiency diffraction and beam deflection devices from the perspective of interference.