Edible films prepared from biological materials are being massively used. This study aimed to prepare edible films from native potato starch of the Allcca sipas variety (Solanum tuberosum subsp. Andigena), nopal mucilage (Opuntia ficus indica), and glycerol. Twelve edible films were prepared with starch, mucilage, and glycerin in different proportions by thermosynthesis. It was observed that mucilage and glycerol have a significant direct effect on film solubility and an inverse effect on a_w, while the effect of starch is the opposite. The a_w ranged from 0.562 to 0.639. The FTIR analysis showed the interaction of the components in the films being considerably influenced by the addition of mucilage. The TGA/DTA analysis reported low thermal stability in the films, retaining water around 100 °C, and showing a tendency to lose weight when the content of starch is high, while the opposite occurred with the addition of mucilage; it was also observed that around 310 °C, the maximum weight loss was observed between 53.6 and 86.1%. SEM images showed uniform films without cracks. The results are promising and show the possibility of preparing edible films from native potato starch and mucilage.

Native potato clones grown in Peru contain bioactive compounds beneficial to human health. This study aimed to optimize the spray-drying nanoencapsulation of native potato phenolic extracts utilizing a central composite design and response surface methodology, obtaining the optimal treatment to an inlet temperature of 120 °C and an airflow of 141 L/h in the nano spray dryer B-90, which allowed maximizing the yield of encapsulation, antioxidant capacity (DPPH), encapsulation efficiency (EE), total phenolic compounds, and total flavonoids; on the other hand, it allowed minimizing hygroscopicity, water activity (Aw), and moisture. Instrumental characterization of the nanocapsules was also carried out, observing a gain in lightness, reddening of the color, and spherical nanoparticles of heterogeneous size (133.09–165.13 nm) with a negative ζ potential. Thermal, infrared, and morphological analyses confirmed the encapsulation of the core in the wall materials. Furthermore, an in vitro release study of phenolic compounds in an aqueous solution achieved a maximum value of 9.86 mg GAE/g after 12 h. Finally, the obtained nanocapsules could be used in the food and pharmaceutical industry.

The cellulose from agroindustrial waste can be treated and converted into nanocrystals or nanofibers. It could be used to produce biodegradable and edible films, contributing to the circular economy and being environmentally friendly. This research aimed to develop an edible film elaborated with activated cellulose nanocrystals, native potato starch, and glycerin. The activated cellulose nanocrystals were obtained by basic/acid digestion and esterification with citric acid from corn husks. The starch was extracted from the native potato cultivated at 3500 m of altitude. Four film formulations were elaborated with potato starch (2.6 to 4.4%), cellulose nanocrystals (0.0 to 0.12%), and glycerin (3.0 to 4.2%), by thermoforming at 60 °C. It was observed that the cellulose nanocrystals reported an average size of 676.0 nm. The films mainly present hydroxyl, carbonyl, and carboxyl groups that stabilize the polymeric matrix. It was observed that the addition of cellulose nanocrystals in the films significantly increased (p-value < 0.05) water activity (0.409 to 0.447), whiteness index (96.92 to 97.27), and organic carbon content. In opposition to gelatinization temperature (156.7 to 150.1 °C), transparency (6.69 to 6.17), resistance to traction (22.29 to 14.33 N/mm), and solubility in acidic, basic, ethanol, and water media decreased. However, no significant differences were observed in the thermal decomposition of the films evaluated through TGA analysis. The addition of cellulose nanocrystals in the films gives it good mechanical and thermal resistance qualities, with low solubility, making it a potential food-coating material.

The headwaters of the high Andean basin in Peru accumulate water from the mist, rain, snow, and hail, and it is transported superficially and underground to low-lying areas, mostly used for drinkable purposes. The natural water in these areas might be altered due to legal and illegal mining extraction. The aim of the study was to evaluate the water quality for human consumption. Seventeen water samples were examined from Andahuaylas (A), San Jerónimo (S), Talavera (T), and Chiara (CH) districts located between 2813 and 4004 m altitude in the Andes. We used physicochemical, microbiological, and metal parameters, and the results were compared to permissible levels established by the WHO and ECA-Peru to examine samples collected in the dry and rainy seasons in 2019. Application of principal component analysis (PCA) identified areas and conditioning parameters. Extractive mining activity influences the quality of springs due to the presence of metals, especially antimony (Sb), arsenic (As), cadmium (Cd), and lead (Pb), values of which are higher than values permissible for human consumption, being higher in the dry season (p < 0.05). In addition, the presence of cations and particulate matter affects physico-chemical parameters, for example turbidity. PCA showed that parameters for water characterization are season-independent, and water quality in the springs would be conditioned by the presence of metals, especially in Andahuaylas and Talavera zones, as well as the parameters that are associated with dissolved solids in the water (turbidity and fluorides). A frequent monitoring program of springs and groundwater is recommended, with the purpose to protect water from contamination and guarantee safe water availability in low-lying and urbanized areas.

In recent years, sustainable biopolymers have attracted increasing attention in environmental engineering as alternatives to conventional synthetic materials due to their renewable origins, biodegradability, and functional versatility. However, their performance and technological viability are strongly influenced by structural design, modification strategies, and behavior under realistic environmental conditions. This review critically analyzes recent advances in biopolymers for environmental remediation, covering their main application formats such as hydrogels, membranes, beads, aerogels, and composites, their interaction mechanisms with contaminants, and their performance relative to conventional adsorbents. Particular emphasis is placed on emerging approaches, including advanced functionalization, integration with inorganic phases, and green synthesis technologies, which have significantly improved efficiency, selectivity, and operational stability. Despite these advances, key limitations persist, particularly regarding mechanical robustness, regenerability, reproducibility, and scalability, underscoring the need for standardized evaluation protocols in complex matrices. The role of biopolymers within circular economy frameworks is also examined, emphasizing their capacity to integrate material sustainability, resource recovery, and multifunctional environmental applications. Overall, sustainable biopolymers are positioned not only as substitutes for traditional materials but also as strategic platforms for the development of next-generation regenerative environmental technologies.

Pollution indexes are instruments that allow a quick interpretation of water quality, combining physical, chemical, and microbiological parameters to generate a numerical value. Our aim was to evaluate spatial and temporal-spatial water quality and propose a water pollution index (WPI) for high Andean rivers using multivariate statistics. Data on physical, chemical, and microbiological parameters were collected from the river water of the Chumbao sub-basin during the rainy and dry seasons at eight sampling points. The laboratory and field analysis methods were developed following the methodology proposed by the APHA. Spearman’s correlation, cluster analysis, and discriminate analysis were applied to evaluate water quality’s spatial and temporal variation and principal component analysis/factor analysis to identify critical parameters to formulate the Water Pollution Index (WPI). The parameters with the most incidence in water quality were color, conductivity, dissolved oxygen, biochemical demand oxygen, ammonia, total phosphorus, lead, chromium, and thermotolerant coliforms. The inorganic pollution index (IPI) was obtained from conductivity, lead, and chromium, reporting pollution levels for the river water between “none” to “high”; and the organic pollution index (OPI) was obtained from dissolved oxygen, biochemical demand oxygen, ammonia, total phosphorus, color, and thermotolerant coliforms, with levels of “low” to “very high” pollution. The proposed pollution indexes are water management instruments that evaluate water quality.