This study introduced an experimental setup designed to predict collision pressure exerted on a structure due to ice impacts. The primary aim was to forecast the pressure distribution and structural behavior following an ice collision on a laboratory scale. The apparatus comprises a double-pendulum system situated within a cold chamber, facilitating the prediction of collision forces by varying both the collision energy and velocity. Experiments were conducted at collision velocities of 5, 7, and 10 knots, representative of conditions in Arctic regions. By altering these velocities, we measured both the strain experienced by a steel plate and the pressure due to the ice collision. The pressure distribution on the steel plate surface was also recorded by using pressure-sensitive film. This setup effectively captured the pressure distribution across the collision contact area. The measured pressure and force were compared with that of previous studies to determine the validity of the ice collision force measurement. This methodology successfully captures the relationship between the increasing collision speed and force, providing valuable insights into ice-induced forces and structural strain. It offers an effective measurement technique beneficial for designing ice-resistant structures. In conclusion, this paper enhances our understanding of ice–structure interactions, particularly in the domains of collision force and strain metrics.

Liquid cargo storage tanks of liquefied natural gas (LNG) carriers are designed by strict standards to maintain the cryogenic state (−163 °C). For most LNG cargo storage tanks, it is mandatory to install a system that can safely store leaked fluid for 15 days in the case of leakage of liquid cargo due to crack of the insulation system. To ensure safety, it is necessary to predict the amount of LNG spilling from the cracks in the insulation panels. Although international regulations are provided, they rely on a conservative and consistent coefficient. In this study, experimental and numerical methods were applied to examine the design factor used to predict the flow rate in the tank design process. To check the amount of leakage that occurs under pressure conditions of LNG tanks, an experiment was conducted using crack specimens and pressure containers filled with water. In order to simulate the leakage of LNG, the amount of leakage was predicted using the Computational Fluid Dynamics (CFD) method. The distribution of leakage quantity was investigated according to the shape of the crack through the pressure vessel experiment and the analysis. Through CFD analysis, the leakage rate of LNG was calculated for each operating pressure condition through the crack. Finally, the results of this study examined the need to identify and reconsider the coefficients due to international guidelines and other factors in calculating orifice coefficients applied to the design of LNG tanks.