Anwar Baqer

Dr. Anwar Baqer


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2018 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Naif M. Al-HadaNaif M. Al-Hada
Naif M. Al-Hada
HKHalimah Mohamed kamari
Halimah Mohamed kamari
ABAnwar Baqer
Anwar Baqer
ASAbdul Halim Shaari
Abdul Halim Shaari
ESElias Saion
Elias Saion
SnO2 nanoparticle production using thermal treatment with tin(II) chloride dihydrate and polyvinylpyrrolidone capping agent precursor materials for calcination was investigated. Samples were analyzed using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), diffuse UV-vis reflectance spectra, photoluminescence (PL) spectra and the electron spin resonance (ESR). XRD analysis found tetragonal crystalline structures in the SnO2 nanoparticles generated through calcination. EDX and FT-IR spectroscopy phase analysis verified the derivation of the Sn and O in the SnO2 nanoparticle samples from the precursor materials. An average nanoparticle size of 4–15.5 nm was achieved by increasing calcination temperature from 500 °C to 800 °C, as confirmed through TEM. The valence state and surface composition of the resulting nanoparticle were analyzed using XPS. Diffuse UV-vis reflectance spectra were used to evaluate the optical energy gap using the Kubelka-Munk equation. Greater calcination temperature resulted in the energy band gap falling from 3.90 eV to 3.64 eV. PL spectra indicated a positive relationship between particle size and photoluminescence. Magnetic features were investigated through ESR, which revealed the presence of unpaired electrons. The magnetic field resonance decreases along with an increase of the g-factor value as the calcination temperature increased from 500 °C to 800 °C. Finally, Escherichia coli ATCC 25922 Gram (–ve) and Bacillus subtilis UPMC 1175 Gram (+ve) were used for in vitro evaluation of the tin oxide nanoparticle’s antibacterial activity. This work indicated that the zone of inhibition of 22 mm has good antibacterial activity toward the Gram-positive B. subtilis UPMC 1175.

1 October 2016 in Materials Science in Semiconductor Processing
Verified
Journal Article
Closed access
Naif M. Al-HadaNaif M. Al-Hada
Naif M. Al-Hada
ESElias Saion
Elias Saion
HKHalimah Mohamed kamari
Halimah Mohamed kamari
MFMoayad Flaifel
Moayad Flaifel
ASAbdul Halim Shaari
Abdul Halim Shaari
AKAlireza Kharazmi
Alireza Kharazmi

1 January 2017 in Results in Physics
Verified
Journal Article
Open access
ABAnwar Baqer
Anwar Baqer
KMKhamirul Amin Matori
Khamirul Amin Matori
Naif M. Al-HadaNaif M. Al-Hada
Naif M. Al-Hada
ASAbdul Halim Shaari
Abdul Halim Shaari
ESElias Saion
Elias Saion
JLJosephine Ying Chyi Liew
Josephine Ying Chyi Liew
An aqueous medium composed of polyvinylpyrrolidone (PVP) and cerium nitrates at calcination temperature was utilised in the production of cerium oxide (CeO2) semiconductor nanoparticles. A variety of analytical approaches was utilized to examine the structural, morphological and optical characteristics of the resulting nanoparticles. Differential thermal (DTA) and thermogravimetric (TGA) analyses, indicated that the best calcination temperatures for achieving CeO2 nanoparticle production were more than 485 °C. The results from Fourier-transform infrared (FTIR) verified the formation of a crystalline structure after calcination procedures were performed to remove residual organic compounds. Additionally, results from X-ray diffraction (XRD) analysis confirmed the cubic fluorite structure of the CeO2 produced. Samples were also analysed by energy dispersive spectroscopy (EDXA) which indicated the existence of O and Ce in the samples. Field emission scanning electron microscopy (FESEM) was used in the characterisation of nanoparticle morphological features. Transmission electron microscopy (TEM) was employed to estimate typical nanoparticle and distribution within sample. This analysis indicated that mean particle sizes were inversely correlated with PVP concentration, with nanoparticle sizes ranging between 12 ± 7 nm at 0.03 g/mL PVP and 6 ± 2 nm at 0.05 g/mL PVP. These results corroborated those obtained by XRD analysis. A UVâvis spectrophotometer was utilised in the demonstration of optical properties and to examine the band gap energy of samples. The potential UV-shielding properties of the nanoparticles were demonstrated by the observed blue shift of the estimated optical energy band, i.e. from 3.35 to 3.43 eV, whilst PL spectra results indicated that decreasing particle size was associated with diminishing photoluminescence intensity. Keywords: Cerium oxide nanoparticles, Heat treatment technique, Structural properties, Optical propertie

1 June 2018 in Results in Physics
Verified
Journal Article
Open access
ABAnwar Baqer
Anwar Baqer
KMKhamirul Amin Matori
Khamirul Amin Matori
Naif M. Al-HadaNaif M. Al-Hada
Naif M. Al-Hada
ASAbdul Halim Shaari
Abdul Halim Shaari
HKHalimah Mohamed Kamari
Halimah Mohamed Kamari
CAChe Azurahanim Che Abdullah
Che Azurahanim Che Abdullah

22 August 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Naif M. Al-HadaNaif M. Al-Hada
Naif M. Al-Hada
RKRafiziana Md. Kasmani
Rafiziana Md. Kasmani
HKHairoladenan Kasim
Hairoladenan Kasim
Abbas M. Al-GhailiAbbas M. Al-Ghaili
Abbas M. Al-Ghaili
MSMuneer Aziz Saleh
Muneer Aziz Saleh
JWJihua Wang
Jihua Wang
In the present work, a thermal treatment technique is applied for the synthesis of CexSn1−xO2 nanoparticles. Using this method has developed understanding of how lower and higher precursor values affect the morphology, structure, and optical properties of CexSn1−xO2 nanoparticles. CexSn1−xO2 nanoparticle synthesis involves a reaction between cerium and tin sources, namely, cerium nitrate hexahydrate and tin (II) chloride dihydrate, respectively, and the capping agent, polyvinylpyrrolidone (PVP). The findings indicate that lower x values yield smaller particle size with a higher energy band gap, while higher x values yield a larger particle size with a smaller energy band gap. Thus, products with lower x values may be suitable for antibacterial activity applications as smaller particles can diffuse through the cell wall faster, while products with higher x values may be suitable for solar cell energy applications as more electrons can be generated at larger particle sizes. The synthesized samples were profiled via a number of methods, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). As revealed by the XRD pattern analysis, the CexSn1−xO2 nanoparticles formed after calcination reflect the cubic fluorite structure and cassiterite-type tetragonal structure of CexSn1−xO2 nanoparticles. Meanwhile, using FT-IR analysis, Ce-O and Sn-O were confirmed as the primary bonds of ready CexSn1−xO2 nanoparticle samples, whilst TEM analysis highlighted that the average particle size was in the range 6−21 nm as the precursor concentration (Ce(NO3)3·6H2O) increased from 0.00 to 1.00. Moreover, the diffuse UV-visible reflectance spectra used to determine the optical band gap based on the Kubelka–Munk equation showed that an increase in x value has caused a decrease in the energy band gap and vice versa.

11 October 2017 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
ABAnwar Baqer
Anwar Baqer
KMKhamirul Matori
Khamirul Matori
Naif M. Al-HadaNaif M. Al-Hada
Naif M. Al-Hada
HKHalimah Mohamed Kamari
Halimah Mohamed Kamari
ASAbdul Halim Shaari
Abdul Halim Shaari
JLJosephine Ying Chyi Liew
Josephine Ying Chyi Liew