In this article, the wave finite element method (WFEM) is used to calculate the band gap characteristics of two-dimensional (2D) periodic double-wall grillages (DwGs), which are verified by the grillage model vibration measurement experiment and finite element calculation. To obtain the band gap characteristics of periodic DwGs, the finite element calculation model is established according to the lattice and energy band theory and the characteristic equation of the periodic unit cell under the given wave vector condition is solved based on Bloch theorem. Then, the frequency transfer functions of finite-length manufactured and finite element models are obtained to verify the band gap characteristics of periodic DwGs. Finally, the effects of material parameters and structural forms on band gap characteristics and transfer functions are analyzed, which can provide a reference for engineering structure vibration and noise reduction design.
The vibration of the periodic oscillator coupled damping beam model is reduced through the band gaps designing method, which can be applied in equivalent engineering structures. In this paper, the flexural wave dispersion relations of the infinite long periodic oscillator coupled damping beam were calculated using the reverberation-ray matrix method combined with the Bloch theorem. The flexural wave vibration frequency response function of the finite long periodic oscillator coupled damping beam was carried out using the finite element method. The flexural wave vibration band gaps occur in the infinite long periodic oscillator coupled damping beam model in both the analytical and numerical results. In these band gaps, flexural waves’ propagation is prohibited, and flexural vibration is significantly suppressed. Furthermore, the effects of structure and material parameters on the flexural wave vibration band gaps characteristics are studied. Thus, the structural vibration reduction design can be realized by adjusting the related parameters of the periodic coupled damping beam structures and the equivalent 2D periodic stiffened plate structures.
A periodic beam-oscillators coupling system is proposed as a physical model in this paper for analyzing the dynamic characteristics of periodic support beams and low-frequency flexural wave vibration of slender stiffened plate structures. The dispersion relation of flexural wave in the infinite long homogeneous beam coupled with periodic oscillators is calculated using the method of reverberation-ray matrix combined with the Bloch theorem. The accuracy and effectiveness of the method of reverberation-ray matrix in analyzing the band gaps and vibration characteristics of the homogeneous beam coupled with periodic oscillators are verified by the numerical results of the finite long homogeneous beam coupled with periodic oscillators. Both the analytical and numerical results show the existences of flexural wave band gaps in the homogeneous beam coupled with periodic oscillators, in which the propagation of the flexural waves is prohibited and flexural wave vibration is significantly suppressed. Furthermore, the effects of structural and material parameters on the flexural wave band gaps characteristics are respectively investigated. The flexural wave band gaps can be adjusted and optimized manually by adjusting structural and material parameters, which can be applied to vibration and noise control design of periodic support beams and slender stiffened plate structures.