In this article winding schemes and calculation methods for original energy efficient electric machines are introduced. They are intended for application in electrical equipment of autonomous systems. These machines winding conductors have a rectangular cross-section. Slot connection spots and overhang parts are reduced. This allows one to reduce copper intensity and the machine length and improve efficiency. Specific end-face schemes and the conductors connection diagram for the stator windings are given. Overhang deviation and machine characteristics calculation features are described. The thermal simulation was undertaken for original conductors. The calculation results are compared with serial produced electric machines.
In modern power setups of autonomous objects, electromechanical converters with good mass and volume performances are used. However, the problem of lowering the specific energy parameters of electric...
Internal combustion engine start processes in Hybrid Electric Vehicles (HEVs) are accompanied by large currents in the windings of electrical machines. It can lead to insulation overheating and fault operation mode. Induction squirrel-cage machine is one of the best AC machines for HEVs. The high efficiency of HEV induction machine with compact stator winding form is proposed. Its stator electrical and thermal processes are considered. Irregular cross-section of stator winding leads to irregular current density in particular winding parts. To decrease temperature gradients within induction machine and improve heat transfer, air gap between overhang parts and stator should be increased. Numerical and computer models for researching are based on finite element method.
A hybrid vehicle is characterized by the unification of the two functional systems: the generating electricity system in the vehicle's electrical system and the starter system of the internal combustion engine (ICE). The development of power electronics, as well as the growth of power, consumed by the vehicles, allows us to combine the starter system and power supply in a single power unit - the starter-generator. It is the combination of the AC machine (ACM) and the power electronic converter. The AC comes out of the electronic power converter connected to the stator of ACM. The DC comes out of this converter connected to the battery and (or) capacitive energy storage (CES). In the motor mode, ACM starts the ICE. In electric vehicles, the starter-generator allows recuperating electric energy and acts as a part of the braking system. The article is devoted to the design of the induction starter-generator for the Russian automobile “LADA”. The modeling results and analysis of start/stop processes are given.