The accurate segmentation of retinal vascular is of great significance for the diagnosis of diseases such as diabetes, hypertension, microaneurysms and arteriosclerosis. In order to segment more deep and small blood vessels and provide more information to doctors, a multi-scale joint optimization strategy for retinal vascular segmentation is presented in this paper. Firstly, the Multi-Scale Retinex (MSR) algorithm is used to improve the uneven illumination of fundus images. Then, the multi-scale Gaussian matched filtering method is used to enhance the contrast of the retinal images. Optimized by the Particle Swarm Optimization (PSO) algorithm, Otsu algorithm (OTSU) multi-threshold segmentation is utilized to segment the retinal image extracted by the multi-scale matched filtering method. Finally, the image is post-processed, including binarization, morphological operation and edge-contour removal. The test experiments are implemented on the DRIVE and STARE datasets to evaluate the effectiveness and practicability of the proposed method. Compared with other existing methods, it can be concluded that the proposed method can segment more small blood vessels while ensuring the integrity of vascular structure and has a higher performance. The proposed method has more obvious targets, a higher contrast, more plentiful detailed information, and local features. The qualitative and quantitative analysis results show that the presented method is superior to the other advanced methods.

To get more obvious target information and more texture features, a new fusion method for the infrared (IR) and visible (VIS) images combining regional energy (RE) and intuitionistic fuzzy sets (IFS) is proposed, and this method can be described by several steps as follows. Firstly, the IR and VIS images are decomposed into low- and high-frequency sub-bands by non-subsampled shearlet transform (NSST). Secondly, RE-based fusion rule is used to obtain the low-frequency pre-fusion image, which allows the important target information preserved in the resulting image. Based on the pre-fusion image, the IFS-based fusion rule is introduced to achieve the final low-frequency image, which enables more important texture information transferred to the resulting image. Thirdly, the ‘max-absolute’ fusion rule is adopted to fuse high-frequency sub-bands. Finally, the fused image is reconstructed by inverse NSST. The TNO and RoadScene datasets are used to evaluate the proposed method. The simulation results demonstrate that the fused images of the proposed method have more obvious targets, higher contrast, more plentiful detailed information, and local features. Qualitative and quantitative analysis results show that the presented method is superior to the other nine advanced fusion methods.

To improve the precision and sensitivity of the detection in near infrared gas detection system, the selection of light source and design of gas chamber structure are two key links. In this paper, the near infrared (NIR) light sources fabricated with PbSe quantum dots (QDs) and a new gas cell structure using an ellipsoid reflector were designed to test the concentration of methane (CH₄). The double wavelengths differential detection method was used in the paper. The signal wavelength is 1.665 μm from the NIR QD-based light source with 5.1 nm PbSe QDs. The reference wavelength is 1.943 μm from the NIR QD-based light source with 6.1 nm PbSe QDs. The experimental results show that the differential gain signal could be enhanced 80 times when the major axis, the focus, and the open length of the ellipsoid reflector are 4.18 cm, 3.98 cm, and 0.36 cm, respectively. The structure will be convenient for the signal amplifying, AD converting, and other process in the latter circuits, and therefore both the detection sensitivity and precision can be improved.

Coal combustion is considered to be the key source of nitrogen oxide (NOx) emissions in thermal power plants. Methods for effective reduction in these emissions are critically sought on the national and global levels. Such methods typically achieve this goal through accurate modeling and prediction. However, such modeling process is difficult because of the complexity of the NOx emission mechanisms and the influence of many factors. Furthermore, real-operation data of power plants tend to be centralized in some local areas because of working condition experiment so that no single model can deal with the complicated and changeable boiler production processes. In this paper, we address this problem and propose a model intelligent combinatorial algorithm (MICA). First, the actual production data are preprocessed by a wavelet denoising algorithm, and the model input variables are selected based on a random forest algorithm. Then, several models for NOx emission prediction are constructed by various data-driven algorithms. Finally, a C4.5 algorithm is applied to intelligently combine these models. The experimental results indicate that the proposed algorithm can construct an accurate prediction model for NOx emissions based on actual operating data. The mean absolute percentage errors are within 1%. Moreover, a correlation of 0.98 between predicted and measured values was obtained by applying the MICA model.

In Multi-scale Geometric Analysis (MGA)-based fusion methods for infrared and visible images, adopting the same representation for the two types of the images will result in the non-obvious thermal radiation target in the fused image, which can hardly be distinguished from the background. To solve the problem, a novel fusion algorithm based on nonlinear enhancement and Non-Subsampled Shearlet Transform (NSST) decomposition is proposed. Firstly, NSST is used to decompose the two source images into low- and high-frequency sub-bands. Then, the wavelet transform(WT) is used to decompose high-frequency sub-bands into obtain approximate sub-bands and directional detail sub-bands. The “average” fusion rule is performed for fusion for approximate sub-bands. And the “max-absolute” fusion rule is performed for fusion for directional detail sub-bands. The inverse WT is used to reconstruct the high-frequency sub-bands. To highlight the thermal radiation target, we construct a non-linear transform function to determine the fusion weight of low-frequency sub-bands, and whose parameters can be further adjusted to meet different fusion requirements. Finally, the inverse NSST is used to reconstruct the fused image. The experimental results show that the proposed method can simultaneously enhance the thermal target in infrared images and preserve the texture details in visible images, and which is competitive with or even superior to the state-of-the-art fusion methods in terms of both visual and quantitative evaluations.