The influence of tree distribution and slope on canopy gap fraction (GF) and bidirectional reflectance factor (BRF) is shown here to be non-negligible. Trees are often assumed to be randomly distributed in natural forests due to random distribution of natural resources, but this assumption is not valid for forest plantations. A geometric optical model for forest plantations (GOFP) is a geometric optical model for forest plantations on horizontal surfaces based on the theory of exclusion distance among crowns. Sloping terrains change the exclusion distance among crowns, and inevitably affect the canopy GF and BRF. In this article, GOFP with a hypergeometric model (distances among trees are considered) on horizontal surfaces is modified as GOFP-T to simulate BRF for forest plantations on sloping terrains under two scenarios: (horizontal distances among crowns remain unchanged with slope) and (sloping distances among crowns remain unchanged with slope). Two three-dimensional (3-D) radiative transfer models (DART and LESS) and field measurements are used to evaluate and validate GOFP-T simulations. The results show that 1) the canopy GF, four component area ratios, and canopy BRF simulated by GOFP-T show high consistency with results from the two 3-D model: root-mean-square errors in GF, sunlit foliage, and sunlit ground are less than 0.02, 0.06, and 0.03, respectively; 2) forest coverage and canopy reflectance in GOFP-T are compared well with point cloud results from an airboard LiDAR system and Landsat 8 OLI surface reflectance products, respectively, indicating that GOFP-T has ability in simulating canopy reflectance for forest plantations on sloping terrains. GOFP-T with the hypergeometric model in this article is the first simple model to simulate canopy GF and BRF for forest plantations on sloping terrains.
As a widely used ground-based optical instrument, the LAI-2000 or LAI-2200 plant canopy analyzer (PCA) (Li-Cor, Inc., Lincoln, NE) is designed to measure the plant effective leaf area index (Le) by measuring the canopy gap fraction at several limited or discrete view zenith angles (VZAs) (usually five VZAs: 7, 23, 38, 53, and 68°) based on Miller’s equation. Miller’s equation requires the probability of radiative transmission through the canopy to be measured over the hemisphere, i.e., VZAs in the range from 0 to 90°. However, the PCA view angle ranges are confined to several limited ranges or discrete sectors. The magnitude of the error produced by the discretization of VZAs in the leaf area index measurements remains difficult to determine. In this study, a theoretical deduction was first presented to definitely prove why the limited or discrete VZAs or ranges can affect the Le measured with the PCA, and the specific error caused by the limited or discrete VZAs was described quantitatively. The results show that: (1) the weight coefficient of the last PCA ring is the main cause of the error; (2) the error is closely related to the leaf inclination angles (IAs)—the Le measured with the PCA can be significantly overestimated for canopies with planophile IAs, whereas it can be underestimated for erectophile IAs; and (3) the error can be enhanced with the increment of the discrete degree of PCA rings or VZAs, such as using four or three PCA rings. Two corrections for the error are presented and validated in three crop canopies. Interestingly, although the leaf IA type cannot influence the Le calculated by Miller’s equation in the hemispheric space, it affects the Le measured with the PCA using the discrete form of Miller’s equation for several discrete VZAs.