Electrodeposition of CdTeSe thin films with two-electrode electrodeposition method in potentiostatic mode was performed at different TeO2 concentrations of 0.075, 0.150, 0.225, 0.30, and 0.375 mM. The structural, optical, surface morphology, surface roughness, and compositional properties of as-deposited (AD) and annealed (HT) CdTeSe thin film samples were investigated by using x-ray diffraction (XRD), ultraviolet-visible (UV-Vis) spectrophotometry, scanning electron microscopy, scanning probe microscopy and energy-dispersive x-ray spectroscopy, respectively. The XRD results confirmed that CdSe thin films are of hexagonal structure. After TeO2 was added, the CdTeSe films were found to have mixed hexagonal and cubic phases. The UV-Vis spectrophotometry results confirmed that the absorbance and band gap of the materials varied as the TeO2 concentration changed. For AD samples, the energy band gap was found to be (1.45–1.75) eV; for HT samples, it varied from (1.53–1.86) eV with TeO2 concentration. The average surface roughness was 93.17 nm and 79.59 nm for the AD and HT un-doped CdSe films, respectively. The average surface roughness values for the AD TeO2 doped (CdTeSe) samples were observed to be 23.00, 162.29, and 26.90 nm, and for the HT samples, they were 25.80, 153.10, and 19.35 nm for TeO2-concentrations of 0.075,0.150, and 0.375 mM respectively. Compositional analysis verified the presence of Cd, Te, and Se in the films. The results show that CdSeTe thin films have potential applications in thin-film solar cell device technology.