Elif ILHAN

Dr. Elif ILHAN

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2020 in APL Bioengineering
Verified
Journal Article
Open access
PDF file
SASaadet Alpdagtas
Saadet Alpdagtas
EIElif ILHAN
Elif ILHAN
EUEbru Uysal
Ebru Uysal
MSMustafa Sengor
Mustafa Sengor
Cem UstundagCem Ustundag
Cem Ustundag
Oguzhan GunduzOguzhan Gunduz
Oguzhan Gunduz
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the agent responsible for the coronavirus disease of 2019 (COVID-19), which triggers lung failure, pneumonia, and multi-organ dysfunction. This enveloped, positive sense and single-stranded RNA virus can be transmitted through aerosol droplets, direct and indirect contacts. Thus, SARS-CoV-2 is highly contagious and has reached a pandemic level in a few months. Since COVID-19 has caused numerous human casualties and severe economic loss posing a global threat, the development of readily available, accurate, fast, and cost-effective diagnostic techniques in hospitals and in any places where humans spread the virus is urgently required. COVID-19 can be diagnosed by clinical findings and several laboratory tests. These tests may include virus isolation, nucleic acid-based molecular assays like real-time polymerase chain reactions, antigen or antibody-based immunological assays such as rapid immunochromatographic tests, enzyme-linked immunosorbent assays, immunofluorescence techniques, and indirect fluorescent antibody techniques, electrochemical sensors, etc. However, current methods should be developed by novel approaches for sensitive, specific, and accurate diagnosis of COVID-19 cases to control and prevent this outbreak. Thus, this review will cover an overview and comparison of multiple reports and commercially available kits that include molecular tests, immunoassays, and sensor-based diagnostic methods for diagnosis of COVID-19. The pros and cons of these methods and future perspectives will be thoroughly evaluated and discussed.

28 April 2021 in Molecules
Verified
Journal Article
Open access
PDF file
SUSongul Ulag
Songul Ulag
EIElif ILHAN
Elif ILHAN
RDRamazan Demirhan
Ramazan Demirhan
ASAli Sahin
Ali Sahin
BKBetul Karademir-Yilmaz
Betul Karademir-Yilmaz
Oguzhan GunduzOguzhan Gunduz
Oguzhan Gunduz
In this research, polyvinyl-alcohol (PVA)/gelatin (GEL)/propolis (Ps) biocompatible nanofiber patches were fabricated via electrospinning technique. The controlled release of Propolis, surface wettability behaviors, antimicrobial activities against the S. aureus and P. aeruginosa, and biocompatibility properties with the mesenchymal stem cells (MSCs) were investigated in detail. By adding 0.5, 1, and 3 wt.% GEL into the 13 wt.% PVA, the morphological and mechanical results suggested that 13 wt.% PVA/0.5 wt.% GEL patch can be an ideal matrix for 3 and 5 wt.% propolis addition. Morphological results revealed that the diameters of the electrospun nanofiber patches were increased with GEL (from 290 nm to 400 nm) and Ps addition and crosslinking process cause the formation of thicker nanofibers. The tensile strength and elongation at break enhancement were also determined for 13 wt.% PVA/0.5 wt.% GEL/3 wt.% Ps patch. Propolis was released quickly in the first hour and arrived at a plateau. Cell culture and contact angle results confirmed that the 3 wt.% addition of propolis reinforced mesenchymal stem cell proliferation and wettability properties of the patches. The antimicrobial activity demonstrated that propolis loaded patches had antibacterial activity against the S. aureus, but for P. aeruginosa, more studies should be performed.

13 November 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ESEzgi Saylam
Ezgi Saylam
YAYigit Akkaya
Yigit Akkaya
EIElif ILHAN
Elif ILHAN
SCSumeyye Cesur
Sumeyye Cesur
EGEce Guler
Ece Guler
Anton FICAIAnton FICAI
Anton FICAI
Parkinson’s disease, the second most common neurodegenerative disease in the world, develops due to decreased dopamine levels in the basal ganglia. Levodopa, a dopamine precursor used in the treatment of Parkinson’s disease, can be used as a drug delivery system. This study presents an approach to the use of 3D-printed levodopa-loaded neural tissue scaffolds produced with polylactic acid (PLA) and chitosan (CS) for the treatment of Parkinson’s disease. Surface morphology and pore sizes were examined by scanning electron microscopy (SEM). Average pore sizes of 100–200 µm were found to be ideal for tissue engineering scaffolds, allowing cell penetration but not drastically altering the mechanical properties. It was observed that the swelling and weight loss behaviors of the scaffolds increased after the addition of CS to the PLA. Levodopa was released from the 3D-printed scaffolds in a controlled manner for 14 days, according to a Fickian diffusion mechanism. Mesenchymal stem cells (hAD-MSCs) derived from human adipose tissue were used in MTT analysis, fluorescence microscopy and SEM studies and confirmed adequate biocompatibility. Overall, the obtained results show that PLA/CS 3D-printed scaffolds have an alternative use for the levodopa delivery system for Parkinson’s disease in neural tissue engineering applications.

31 May 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Muhammed Enes TasciMuhammed Enes Tasci
Muhammed Enes Tasci
BDberna dede
berna dede
Eray TABAKEray TABAK
Eray TABAK
AGAybuke Gur
Aybuke Gur
RSRabia Betül Sulutaş
Rabia Betül Sulutaş
Oguzhan GunduzOguzhan Gunduz
Oguzhan Gunduz
Polymeric microparticles with controlled morphologies and sizes are being studied by researchers in many applications, such as for drug release, healthcare and cosmetics. Herein, spherical and porous polymeric microparticles of different sizes and morphologies by electrospray technique have been developed as a viable alternative. In this work, polylactic acid (PLA) microparticles with a spherical shape and porous morphology were successfully produced via an electrospray technique in a single step. Molecular interactions between the components and the effect of parameters, such as varying solvent compositions, flow rates and voltage on microparticle morphology, were investigated over the particle formation. It was observed that the type of solvents used is the most effective parameter in terms of particle morphology, size and distribution. When the optical microscopy and SEM images of the microparticles were examined, 3 wt.% PLA in dichloromethane (DCM) solution concentration with an applied voltage of 18 kV and a flow rate of 20 µL/min was found to be the optimum parameter combination to achieve the desired spherical and porous micron-size particles. The average diameter of the particles achieved was 3.01 ± 0.58 µm. DCM was found to be a more suitable solvent for obtaining microparticles compared to the other solvents used. Finally, particles that are obtained by electrospraying of PLA–DCM solution are porous and monodisperse. They might have excellent potential as a carrier of drugs to the targeted sides and can be used in different biomedical applications.

1 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
HIhursima izgiş
hursima izgiş
EIElif ILHAN
Elif ILHAN
CKcevriye kalkandelen
cevriye kalkandelen
ECEmrah Celen
Emrah Celen
MGMehmet Mucahit Guncu
Mehmet Mucahit Guncu
CGCONSTANTINESCU R GABRIEL
CONSTANTINESCU R GABRIEL
In this research, as an alternative to chemical and physical methods, environmentally and cost-effective antimicrobial zinc oxide nanoparticles (ZnO NP) were produced by the green synthesis method. The current study focuses on the production of ZnO NP starting from adequate precursor and Zingiber officinale aqueous root extracts (ginger). The produced ZnO NP was loaded into electrospun nanofibers at different concentrations for various tissue engineering applications such as wound dressings. The produced ZnO NPs and ZnO NP-loaded nanofibers were examined by Scanning Electron Microscopy (SEM) for morphological assessments and Fourier-transform infrared spectrum (FT-IR) for chemical assessments. The disc diffusion method was used to test the antimicrobial activity of ZnO NP and ZnO NP-loaded nanofibers against three representatives strains, Escherichia coli (Gram-negative bacteria), Staphylococcus aureus (Gram-positive bacteria), and Candida albicans (fungi) microorganisms. The strength and stretching of the produced fibers were assessed using tensile tests. Since water absorption and weight loss behaviors are very important in tissue engineering applications, swelling and degradation analyses were applied to the produced nanofibers. Finally, the MTT test was applied to analyze biocompatibility. According to the findings, ZnO NP-loaded nanofibers were successfully synthesized using a green precipitation approach and can be employed in tissue engineering applications such as wound dressing.

5 March 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SCSude Cetin
Sude Cetin
TATubanur Avcı
Tubanur Avcı
EUEmre Uygur
Emre Uygur
EIElif ILHAN
Elif ILHAN
EKElif Kaya
Elif Kaya
Oguzhan GunduzOguzhan Gunduz
Oguzhan Gunduz
This study introduces novel chitosan (CS) and polyethylene oxide (PEO) copolymers reinforced with bacterial cellulose (BC) to fabricate nanofibers using the electrospinning method. SEM analysis confirmed uniform nanofiber formation, with CS/PEO/BC nanofibers (~240 nm) exhibiting a larger diameter than CS/PEO ones (~190 nm). FTIR spectroscopy confirmed BC integration, while Differential scanning calorimetry analysis indicated minimal impact on glass transition temperature. Notably, as compared to CS/PEO nanofibers, the CS/PEO/BC ones demonstrated superior swelling capacity, accelerated biodegradation, and enhanced mechanical (i.e., tensile) properties, with maximum stress and strain values of ~3.41 MPa and ~0.01% vs. ~2.14 MPa and ~0.01%. Antimicrobial assays confirmed activity against bacterial strains, and biocompatibility tests showed high cell viability at day seven (99.26% for CS/PEO/BC nanofibers). These findings highlight the potential of CS/PEO/BC nanofibers as promising candidates for tissue engineering, offering improved strength, biodegradability, and antimicrobial properties.