Electricity storage systems, whether electric vehicles or stationary battery storage systems, stabilize the electricity supply grid with their flexibility and thus drive the energy transition forward. Grid peak power demand has a high impact on the energy bill for commercial electricity consumers. Using battery storage capacities (EVs or stationary battery systems) can help to reduce these peaks, applying peak shaving. This study aims to address the potential of peak shaving using a PV plant and smart unidirectional and bidirectional charging technology for two fleets of electric vehicles and two comparable configurations of stationary battery storage systems on the university campus of Saarland University in Saarbrücken as a case study. Based on an annual measurement of the grid demand power of all consumers on the campus, a simulation study was carried out to compare the peak shaving potential of seven scenarios. For the sake of simplicity, it was assumed that the vehicles are connected to the charging station during working hours and can be charged and discharged within a user-defined range of state of charge. Furthermore, only the electricity costs were included in the profitability analysis; investment and operating costs were not taken into account. Compared to a reference system without battery storage capacities and a PV plant, the overall result is that the peak-shaving potential and the associated reduction in total electricity costs increases with the exclusive use of a PV system (3.2%) via the inclusion of the EV fleet (up to 3.0% for unidirectional smart charging and 8.1% for bidirectional charging) up to a stationary battery storage system (13.3%).
This contribution investigates whether the use of the MATLAB Optimization Toolbox on a parameter identification problem for a TRNSYS model provides better performance in iteration time. It presents the development of a framework connecting the MATLAB Optimization Toolbox with TRNSYS on the one hand and coordinating the optimization process of a TRNSYS model by GenOpt through MATLAB on the other hand. A benchmark framework in MATLAB was created to link TRNSYS and MATLAB and to configure the optimization process of GenOpt and the MATLAB Optimization Toolbox. Using this framework, a comprehensive comparison of the optimization solvers in GenOpt and the MATLAB Optimization Toolbox for the identification of the overall heat transfer coefficient of a TRNSYS heat exchanger model regarding the optimization time and number of iterations is presented as a use case. The results for the given problem show that GenOpt gives slightly better results in optimization time, whereas MATLAB has more potential and flexibility.
To meet the world’s growing energy needs, photovoltaic (PV) and electric vehicle (EV) systems are gaining popularity. However, intermittent PV power supply, changing consumer load needs, and EV storage limits exacerbate network instability. A model predictive intelligent energy management system (MP-iEMS) integrated home area power network (HAPN) is being proposed to solve these challenges. It includes forecasts of PV generation and consumers’ load demand for various seasons of the year, as well as the constraints on EV storage and utility grid capacity. This paper presents a multi-timescale, cost-effective scheduling and control strategy of energy distribution in a HAPN. The scheduling stage of the MP-iEMS applies a receding horizon rule-based mixed-integer expert system.To show the precise MP-iEMS capabilities, the suggested technique employs a case study of real-life annual data sets of home energy needs, EV driving patterns, and EV battery (dis)charging patterns. Annual comparison of unique assessment indices (i.e., penetration levels and utilization factors) of various energy sources is illustrated in the results. The MP-iEMS ensures users’ comfort and low energy costs (i.e., relative cost reduction). However, a battery life-cycle degradation model calculates an annual decline in the storage capacity loss of up to .
This publication examines the coordinated operation of pumped hydro energy storage and battery energy storage systems to improve profitability. While pumped hydro energy storages offer high storage capacity but have slower response times, battery energy storage systems have lower capacity but faster response times. A hybrid system combining both can thus harness synergies. A mixed-integer linear programming model was developed to depict the coordinated use of both systems in the German market. The proposed approach is also applicable to other regional markets where energy and balancing services are traded in a similar manner. In this model, the pumped hydro energy storage operates in the spot market and provides automatic Frequency Restoration Reserve, while the battery energy storage systems supplies Frequency Containment Reserve. The model takes into account the costs caused by degradation effects in both storage types. The results show a 10.05 % increase in revenue through coordination compared to the independent operation of both storage systems. This added value can be achieved through more efficient use of the power capacity, particularly that of the battery energy storage systems, in coordinated operation.
The global energy transition demands solutions that balance intermittent renewable energy generation while decarbonizing heat and power sectors. Hydrogen has appeared as a versatile energy carrier, enabling sector coupling across electricity, heat, and industry. This work explores the integration of hydrogen into combined heat and power (CHP) systems, with a regional focus on Saarland, Germany. It depicts H2-ready technologies including combustion engines, gas turbines, and fuel cells, and introduces a custom Python-based (Version 3.13) techno-economic optimization model to simulate multi-energy system operations. The analysis reveals that high hydrogen costs, electricity price volatility, and market design significantly constrain economic viability. However, Saarland’s industrial structure and cross-border infrastructure projects offer strategic opportunities for scalable hydrogen deployment. The article concludes with targeted recommendations for technology development, policy reform, and regional replication, positioning hydrogen CHP as a flexible and decarbonizing solution in energy-intensive regions.