Traffic congestion has become a serious issue due to the growing number of vehicles in Malaysia. Traffic light control system is widely used to control the flow of road junction. Currently, most of the traffic light system used pre-time and count down timers to control traffic flow. Due to the fixed-time setting, often the system unable to handle unexpected heavy traffic flows and cause traffic jam. Thus, there is a need of adaptive traffic signals which are able to do real time monitoring to control traffic light signal based on traffic density. This study proposed an adaptive traffic light control system that uses image processing and image matching technique in controlling the traffic in an effective manner by taking images of each lane at a junction. The density of traffic in the images at each junction are compared. Results show that more time are allocated for the vehicles on the densest road to pass compared to other less dense road. Edge operation detector is used to detect the density of traffic at each lane. In this study, a comparison study was carried out by applying five different edge detectors namely Roberts, Sobel, Log, Canny and active contour. Among these detectors, Canny edge operation detector has found to be the best as it could extract actual edges with average time of 0.453 second.
Respiratory system modelling can assist clinicians in making clinical decisions during mechanical ventilation (MV) management in intensive care. However, there are some cases where the MV patients produce asynchronous breathing (asynchrony events) due to the spontaneous breathing (SB) effort even though they are fully sedated. Currently, most of the developed models are only suitable for fully sedated patients, which means they cannot be implemented for patients who produce asynchrony in their breathing. This leads to an incorrect measurement of the actual underlying mechanics in these patients. As a result, there is a need to develop a model that can detect asynchrony in real-time and at the bedside throughout the ventilated days. This paper demonstrates the asynchronous event detection of MV patients in the ICU of a hospital by applying a developed extended time-varying elastance model. Data from 10 mechanically ventilated respiratory failure patients admitted at the International Islamic University Malaysia (IIUM) Hospital were collected. The results showed that the model-based technique precisely detected asynchrony events (AEs) throughout the ventilation days. The patients showed an increase in AEs during the ventilation period within the same ventilation mode. SIMV mode produced much higher asynchrony compared to SPONT mode (p < 0.05). The link between AEs and the lung elastance (was also investigated. It was found that when the AEs increased, the decreased and vice versa based on the results obtained in this research. The information of AEs and provides the true underlying lung mechanics of the MV patients. Hence, this model-based method is capable of detecting the AEs in fully sedated MV patients and providing information that can potentially guide clinicians in selecting the optimal ventilation mode of MV, allowing for precise monitoring of respiratory mechanics in MV patients.
5 August 2024 in Journal of Advanced Research in Applied Sciences and Engineering Technology
Osteosarcoma (OS) is the most common and frequent primary bone cancer in children and adolescents. This type of bone cancer often developed at the long bones’ extremities close to the metaphyseal growth plates. To address these issues, OS quantitative analysis is performed using Magnetic Resonance Imaging (MRI) to plan surgical procedures and track the effectiveness of treatment. Fat suppression is commonly employed to eliminate the fat signal from T1-Weighted MRI sequence. The suppressed fat signal in T1-Weighted is important and often used to identify abnormalities in other MRI sequences. In clinical, MRI images must be interpreted by a radiologist. Manually outlining the tumour location is laborious and subjective. Image processing involves segmentation to separate information from the desired target region of the image. Active Contour (AC) is an algorithm often used in medical images for segmentation. Nevertheless, the process of mask initialization can be challenging and requires careful attention. This study proposes a method to define the mask initialization so that the AC has a starting point to extract fat in T1-Weighted for the purpose of fat suppression. From the results obtained, AC with the proposed mask initialization method successfully segmented the fat in T1-Weighted MRI images with accuracy, precision, recall and F1-score of 0.92, 0.86, 0.88 and 0.89 respectively.