Recording electric field evolution in single-shot with THz bandwidth is needed in science including spectroscopy, plasmas, biology, chemistry, Free-Electron Lasers, accelerators, and material inspection. However, the potential application range depends on the possibility to achieve sub-picosecond resolution over a long time window, which is a largely open problem for single-shot techniques. To solve this problem, we present a new conceptual approach for the so-called spectral decoding technique, where a chirped laser pulse interacts with a THz signal in a Pockels crystal, and is analyzed using a grating optical spectrum analyzer. By borrowing mathematical concepts from photonic time stretch theory and radio-frequency communication, we deduce a novel dual-output electro-optic sampling system, for which the input THz signal can be numerically retrieved—with unprecedented resolution—using the so-called phase diversity technique. We show numerically and experimentally that this approach enables the recording of THz waveforms in single-shot over much longer durations and/or higher bandwidth than previous spectral decoding techniques. We present and test the proposed DEOS (Diversity Electro-Optic Sampling) design for recording 1.5 THz bandwidth THz pulses, over 20 ps duration, in single-shot. Then we demonstrate the potential of DEOS in accelerator physics by recording, in two successive shots, the shape of 200 fs RMS relativistic electron bunches at European X-FEL, over 10 ps recording windows. The designs presented here can be used directly for accelerator diagnostics, characterization of THz sources, and single-shot Time-Domain Spectroscopy.

The successful realization of high gain free-electron lasers has opened new possibilities to X-ray scientists for investigating matter in different states. The availability of unprecedented photon properties stimulated the development of new experimental techniques capable of taking full advantage of these options and has started a virtuous collaboration between machine experts and photon users to improve further and optimize the generated X-ray pulses. Over the recent years, this has led to the development of several advanced free-electron laser (FEL) schemes to tailor the photon properties to specific experimental demands. Presently, tunable wavelength X-ray pulses with extremely high brilliance and short pulse characteristics are a few of the many options available at FELs. Few facilities can offer options such as narrowband or extremely short pulses below one fs duration and simultaneous pulses of multiple colors enabling resonant X-ray pump—X-ray probe experiments with sub fs resolution. Fully coherent X-ray radiation (both spatial and temporal) can also be provided. This new option has stimulated the application of coherent control techniques to the X-ray world, allowing for experiments with few attoseconds resolution. FELs often operate at a relatively low repetition rate, typically on the order of tens of Hz. At FLASH and the European XFEL, however, the superconducting accelerators allow generating thousands of pulses per second. With the implementation of a new seeded FEL line and with an upgrade at FLASH linac, all the new features will become available in the soft X-ray spectral range down to the oxygen K edge with unprecedented average photon flux due to the high repetition rate of pulses.

Free-electron lasers (FELs) based on superconducting accelerator technology and storage ring facilities operate with bunch repetition rates in the MHz range, and the need arises for bunch-by-bunch electron and photon diagnostics. For photon-pulse-resolved measurements of spectral distributions, fast one-dimensional profile monitors are required. The linear array detector KALYPSO (KArlsruhe Linear arraY detector for MHz-rePetition rate SpectrOscopy) has been developed for electron bunch or photon pulse synchronous read-out with frame rates of up to 2.7 MHz. At the FLASH facility at DESY, a current version of KALYPSO with 256 pixels has been installed at a grating spectrometer as online diagnostics to monitor the pulse-resolved spectra of the high-repetition-rate FEL pulses. Application-specific front-end electronics based on MicroTCA standard have been developed for data acquisition and processing. Continuous data read-out with low latency in the microsecond range enables the integration into fast feedback applications. In this paper, pulse-resolved FEL spectra recorded at 1.0 MHz repetition rate for various operation conditions at FLASH are presented, and the first application of an adaptive feedback for accelerator control based on photon beam diagnostics is demonstrated.

X-ray free-electron lasers based on superconducting accelerator technology deliver ultrashort photon pulses with unprecedented peak brilliance at high repetition rates. Continuous and noninvasive monitoring of the current profile of the electron bunches is essential for the operation and control of the accelerator. Longitudinal diagnostics based on coherent radiation have already shown their potential at various free-electron laser facilities, and the multi-GeV electron beams of x-ray free-electron lasers are powerful sources for the generation of broadband coherent diffraction radiation. We present noninvasive current profile measurements with a few femtoseconds resolution based on spectroscopy of coherent diffraction radiation in the frequency range 0.7–58 THz. The current profiles, reconstructed from the spectroscopic data with an advanced phase retrieval method, are compared with measurement results obtained with a transverse deflecting structure. For the first time, bunch-resolved current profiles have been recorded simultaneously to user operation at European XFEL for all bunches in the bunch train at MHz repetition rates.

An electro-optic detector is one of the diagnostic setups used in particle accelerators. It employs an electro-optic crystal to encode the longitudinal beam charge profile in the spectrum of a light pulse. The charge distribution is then reconstructed using data captured by a fast spectrometer. The measurement repetition rate should match or exceed the machine bunching frequency, which is often in the range of several MHz. A high-speed optical line detector (HOLD) is a linear camera designed for easy integration with scientific experiments. The use of modern FPGA circuits helps in the efficient collection and processing of data. The solution is based on Xilinx 7-Series FPGA circuits and implements a custom latency-optimized architecture utilizing the AXI4 family of interfaces. HOLD is one of the fastest line cameras in the world. Thanks to its hardware architecture and a powerful KALYPSO sensor from KIT, it outperforms the fastest comparable commercial devices.