Due to the growing demand for versatile hybrid materials that can withstand harsh conditions (below −40 °C), fluorosilicone copolymers are becoming promising materials that can overcome the limited operating temperature of conventional rubber. In order to synthesize a fluorosilicone copolymer, a potent initiator capable of simultaneously initiating various siloxane monomers in anionic ring-opening polymerization (AROP) is required. In this study, tetramethyl ammonium silanolate (TMAS), a quaternary ammonium (QA) anion, was employed as an initiator for AROP, thereby fluoro-methyl-vinyl-silicone (FVMQ) and fluoro-hydrido-methyl-silicone (FHMQ) were successfully synthesized under optimized conditions. FT-IR, NMR, and GPC analyses confirmed that the chain length and functional group content of FVMQ and FHMQ are controlled by changing the ratio of the components. Moreover, fluorine-involved liquid silicone rubber (F-LSR) was prepared with FVMQ as the main chain and FHMQ as a crosslinker. The tensile strength, elongation, and hardness of each F-LSR sample were measured. Finally, it was confirmed through TGA, DSC, TR-test, and embrittlement testing that elastic retention at low temperatures improved even though the heat resistance slightly decreased as the trifluoropropyl group increased in F-LSR. We anticipate that the optimization of fluorosilicone synthesis initiated by QA and the comprehensive characterization of F-LSRs with different fluorine content and chain lengths will be pivotal to academia and industry.

Gaskets and seals are essential components in the operation of proton exchange membrane (PEM) fuel cells and are required for keeping hydrogen and air/oxygen within their individual compartments. The durability of these gaskets and seals is necessary, as it influences not only the lifespan but also the electrochemical efficiency of the PEM fuel cell. In this study, the cause of silicon leaching from silicone gaskets under simulated fuel cell conditions was investigated. Additionally, to reduce silicon leaching, the silica surface was treated with methyltrimethoxysilane, vinyltriethoxysilane, and (3,3,3-trifluoropropyl)trimethoxysilane. Changes in the silica surface chemistry were investigated by scanning electron microscopy, energy dispersive X-ray spectroscopy, thermogravimetric analysis, elemental analysis, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. Inductively coupled plasma-optical emission spectroscopy analysis revealed that surface-treated silica was highly effective in reducing silicon leaching.

The hollow glass microsphere (HGM) containing polymer materials, which are named as syntactic foams, have been applied as lightweight materials in various fields. In this study, carboxyl group-containing hyperbranched polymer (HBP) was added to a glass fiber (GF)-reinforced syntactic foam (RSF) composite for the simultaneous enhancement of mechanical and rheological properties. HBP was mixed in various concentrations (0.5–2.0 phr) with RSF, which contains 23 wt% of HGM and 5 wt% of GF, and the rheological, thermal, and mechanical properties were characterized systematically. As a result of the lubricating effect of the HBP molecule, which comes from its dendritic architecture, the viscosity, storage modulus, loss modulus, and the shear stress of the composite decreased as the HBP content increased. At the same time, because of the hydrogen bonding among the polymer, filler, and HBP, the compatibility between filler and the polymer matrix was enhanced. As a result, by adding a small amount (0.5–2.0 phr) of HBP to the RSF composite, the tensile strength and flexural modulus were increased by 24.3 and 9.7%, respectively, and the specific gravity of the composite was decreased from 0.948 to 0.917. With these simultaneous effects on the polymer composite, HBP could be potentially utilized further in the field of lightweight materials.