Ming Xue

Dr. Ming Xue

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
CCCai Changsong
Cai Changsong
JWJunhua Wang
Junhua Wang
LWLeke Wan
Leke Wan
XWXi Wu
Xi Wu
ZYZhaoyang Yuan
Zhaoyang Yuan
MSMaryam Saeedifard
Maryam Saeedifard
This article introduces a novel coupling mechanism along with a simplified configuration strategy for achieving robust and wide-area dynamic wireless charging of multipath movable receivers (Rxs). The proposed coupling mechanism involves non-overlapping arrangement of multitransmitter (Tx) coils in a 2-D plane, which are omnidirectionally decoupled by integrating simple planar coils, effectively expanding the charging area with flexibility. To enhance the flux harvesting capability and maximize the stable coupling area of each Tx cell, a dual-winding complementary (Cx) coil is introduced on the Rx side without Rx coupling restrictions. Leveraging this mechanism, robust and efficient charging can be achieved by activating only one Tx or two diagonally adjacent Txs, thereby reducing system configuration complexity and power loss. Additionally, a double-layered model-free strategy based on co-measurementof the Tx and Rx sides is proposed for detecting the position and orientation of 2-D omnidirectional-moving Rx, facilitating Tx configuration with reduced cost and enhanced reliability. Experimental results from a scaled-down prototype demonstrate robust performance, achieving a stable 85% overall efficiency and less than ±5% output voltage fluctuation in the 2-D area, validating the effectiveness of the proposed approach.

5 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
ZYZhaoyang Yuan
Zhaoyang Yuan
YQYang Qingxin
Yang Qingxin
XZXian Zhang
Xian Zhang
XMxianjie ma
xianjie ma
ZCZhixin Chen
Zhixin Chen
PZPengcheng Zhang
Pengcheng Zhang
Wireless power transfer (WPT) has been a promising way to transfer power wirelessly over certain distances through the mutual inductance (MI) of the magnetically coupled transmitter and receiver coils, providing significant benefits of convenience, safety, and feasibility to special occasions. The stable output and efficiency cannot be maintained due to the load variation and the inevitable misalignment between the magnetic couplers. High-order compensation topologies that are highly flexible in design due to more compensation elements are essential for the WPT to suppress the load variation and misalignment effects. However, due to core loss and thermal management, high-power-level and high-frequency inductor design have always been challenging for WPT systems. Space occupation and cost are other aspects to be considered for inductor design. Thus integrating these additional bulky inductors into the main coils has been a critical trial. As a result, the compensation topologies’ original input and output profiles will change or even disappear. This paper reviews the existing high-order compensation topologies and their integration principles and implementation for the WPT to obtain high misalignment tolerance. The design objectives and challenges of the integrated compensation topology in terms of misalignment tolerance capability are discussed. The relevant control systems to cope with coil misalignment and load variations are investigated. Challenges and future development of the high-tolerant WPT are discussed.

21 August 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
CCCai Changsong
Cai Changsong
JWJunhua Wang
Junhua Wang
YZYanpu Zhao
Yanpu Zhao
YLYang Luo
Yang Luo
ZYZhaoyang Yuan
Zhaoyang Yuan
CWChenlu Wang
Chenlu Wang
The coordination of dual extended rectangular coils is an effective way of wireless charging area expansion for unipolar and bipolar receivers (Rxs). However, the cross-coupling field and the leakage field of the dual coils, laid out for multimodal transmission stability, inevitably interfere with system performance and external objects. The paper presents a hybrid interference field mitigation method to eliminate the cross-coupling between the dual transmitter (Tx) coils and reduce the leakage flux in the target canceling area based on the specific self-decoupling (SD) and active-shielding (AS) coil design. Based on the field distribution characteristics, a planar SD coil, integrated into the Tx pad, is designed with the same-direction current of the Tx coils to couple with the adjacent Tx coils to neutralize the cross-coupling, which fully utilizes the emptiness of the overlapped Tx coils. Ulteriorly, to cancel the leakage fields outside the large charging area while minimizing the impact on transmission coupling, an AS coil with dual-objective windings is segmented to suit the Txs under different excitation modes. The mitigation coils are sequentially worked out by a simulation-based study for optimized shielding and decoupling with reduced impacts on transmission performance. Finally, a dual-rectangular Tx Pad-based WPT prototype with the designed SD and AS coils is established, and the experimental results show the effectiveness of this method.

12 March 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JWJunhua Wang
Junhua Wang
LWLeke Wan
Leke Wan
CCCai Changsong
Cai Changsong
MXMing Xue
Ming Xue
YDYinfeng Du
Yinfeng Du
JZJin Zhang
Jin Zhang
Position detection of the energy pickup receiver (Rx) in long-track dynamic wireless power transfer (DWPT), including longitude misalignment and motion trace, is essential for practical applications. This article presents a dual-side magnetic integration-based Rx position detection (RPD) method, which utilizes integrated inductor coils of the LCC-LCC compensated DWPT topology to achieve cost-effective Rx detection without extra sensors or energizing circuits. Solenoid and bipolar integrated coils are, respectively, designed in the transmitter and Rx sides to realize Rx detection without affecting WPT performance. Key parameters of the integrated coils are optimized for accurate Rx positioning. The Rx detection strategy is then developed based on two mapping indicators, holding the merits of dual-objective Rx detection capabilities and a simplified positioning procedure. A scaled-down long-track DWPT experimental prototype is established to demonstrate the effectiveness and feasibility of the proposed RPD method under dynamic operation or malfunction conditions. The experimental results show that a reasonable sampling interval can mitigate the positioning error caused by the vehicle's velocity.

20 October 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZDZhongyu Dai
Zhongyu Dai
YSYang Sun
Yang Sun
QGQuan Gan
Quan Gan
YZYanhu Zhai
Yanhu Zhai
HWHuihui Wang
Huihui Wang
XZXian Zhang
Xian Zhang
According to the duality of inductive wireless power transfer (IPT) and capacitive wireless power transfer (CPT) in coupler and tuning method, an integrated coil is designed in this article to constructs a compact hybrid wireless power transfer (HPT). The magnetic field coupling and the electric field coupling constructed by coils and plates share one energy transmission channel, which enhances the transmission power and energy density. The inductance of coils and capacitances of plates compensate for each other. The resonant frequency of integrated coils is adjusted to kHz. Additional tuning inductances and capacitances are eliminated to build a lighter self-resonance coupler. The stacked structure design of coils and plates enables compact integration and miniaturization of integrated coils. A 300 W experimental platform was built, and some comparative experiments were conducted. Compared to the coupler of IPT, the self-resonance coupler has improved performance in transmission power, antioffset, and over-coupling suppression. HPT performs better than CPT in transmission distance, transmission power, and transmission efficiency. It has some advantages in the medium-power application scenarios, such as inspection robots and drones, which expect couplers to have a smaller volume, lighter weight, higher power density and better antioffset.

17 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
ZYZhaoyang Yuan
Zhaoyang Yuan
YQYang Qingxin
Yang Qingxin
XZXian Zhang
Xian Zhang
XMxianjie ma
xianjie ma
RWRan Wang
Ran Wang
PZPengcheng Zhang
Pengcheng Zhang
This paper proposes a cooperative (Cx) coil design for the series-series-series (S-S-S)-compensated wireless power transfer (WPT) system to improve the horizontal misalignment tolerance and the system efficiency. The Cx coil is formed by four series-connected rectangular coils and integrated into the transmitter (Tx) coil to provide a coupling variation opposite to that of the Tx coil, obtaining the constant equivalent mutual inductance (MI). The design overcomes the problem that the decoupling-designed intermediate coil does not participate in system energy delivery under the well-aligned condition. A misalignment tolerant design with the zero-phase-angle (ZPA) input and load-independent constant current (CC) output conditions is presented based on the Delta-Wye network transform and linear regression. A comparison between the proposed design and a two-coil system using a similar amount of copper, i.e., the Tx coil plus the Cx coil, is made. Finally, a 218.08 W/85.85 kHz scaled-down prototype with the proposed Cx coil is demonstrated to validate the performance and effectiveness of the design. The proposed design can maintain at over 82% efficiency, and offer the ZPA input and load-independent CC output within a misalignment tolerant range of 50% of the length of the receiver coil, as the load varies from 10 Ω to 25 Ω.