As the proportion of power generation using renewable energy increases, it is important to improve the operational flexibility of gas turbines (GTs) for the stability of power grids. Increasing the ramp-rate of GTs is a general solution. However, a higher ramp-rate increases the turbine inlet temperature (TIT), its rate of change, and the fluctuation of the frequency of produced electricity, which are negative side effects. This study proposes a method to optimize the set-point schedule for a PID controller to improve the ramp-rate while decreasing the negative impacts. The set-point schedule was optimized for a 170-MW class GT using a genetic algorithm to minimize the difference between the value of the process variable and the set-point value of the conventional control. The advanced control reduced the fluctuation of the rotation speed by 20% at the reference ramp-rates (12 MW/min and 15 MW/min). The maximum TIT decreased by 6.3 °C, and its maximum rate of change decreased from 0.7 °C/s to 0.4 °C/s. The advantage of the advanced control becomes more marked as the ramp-rate increases. Even at a much higher ramp-rate (50 MW/min), the advanced control decreased the rotation speed fluctuation by 40% in comparison to the conventional control at the reference ramp-rate.